BS-GR-40 Vacuum lifter, lift height 1200. Seal condition is checked before each lift on a smooth surface.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | BS-GR-40 |
| Capacity | 200/400 |
| Lifting Height | 1200 |
| Battery | 24V/70 AH |
| Battery Charger | 24V/10 AH |
| Manufacture NO. | 190487 |
Gallery
All detail images published for this model.





BS-GR-40 Vacuum lifter, part of the Vacuum lifters line.
Vacuum suction lifters and frames for glass, stone, metal sheet and panel installation.
Panel feeding to machines
Published figures for this build: rated capacity 200/400, lift height 1200.
Rotation and tilting let one operator place a panel into a rack.
Glass, stone, metal sheet and plasterboard are handled with pad frames.
Vacuum lifters grip smooth sheets by suction pad, without hooks or slings.
The lifter pairs with a crane, forklift attachment or its own battery frame.
Match the tyre type to the floor surface rather than the price list. Confirm the charger voltage or fuel type for your destination country.
The specification sheet records Model: BS-GR-40; Capacity (KG): 200/400; Lifting Height (MM): 1200; Battery (V/AH): 24V/70 AH; Battery Charger (V/AH): 24V/10 AH; Driving Motor (KW) is not published in the source record.
The specification sheet records Lifting Motor (KW) is not published in the source record; Supply Voltage (V/HZ) is not published in the source record; Manufacture NO.: 190487.
Units are copied as published; convert them only when comparing models.
Those missing values can be requested directly through the enquiry form.
Each row in the table keeps the label and value from the source record.
Rated figures apply at the standard load centre unless a row says otherwise.
Configuration follows the load, working height and site layout.
Dimensions in the table come from the source record.
Measure the pallet footprint before the chassis is shortlisted.
Compare the lowered height against the lowest door on the route.
Review the tyre type against the surface the machine will run on.
List the models that clear each constraint before asking for a quote.
Compare capacity first, then the lift height the job actually needs.
On the BS-GR-40, note any slope, threshold or step along the working route.
Check the lowest door, beam height and aisle the truck has to pass through.
On the BS-GR-40, describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
Measure the pallet footprint and the heaviest single load before comparing models.
On the BS-GR-40, list the attachments required, such as clamps, sideshift or rotator.
On the BS-GR-40, loads are kept low while travelling between stations.
The operator checks load stability before each lift or move.
On the BS-GR-40, routine checks cover tyres, brakes, controls and visible leaks.
Battery or fuel levels are checked at the start of each shift.
On the BS-GR-40, storage cages and racking organise the loads it moves between stations.
The receiving side pairs it with a dock ramp or platform where needed.
On the BS-GR-40, a mixed enquiry can list this model together with other families.
Attachments such as clamps or rotators are matched to the load shape.
On the BS-GR-40, capacity above the rated lift height follows the mast curve.
The signed datasheet issued with the quotation is the binding version.
On the BS-GR-40, site conditions such as gradient, dust and moisture belong in the enquiry.
Tyre choice should match the floor rather than the price list.
On the BS-GR-40, the booking reference is issued with the proforma invoice.
The operation and parts material travel with the machine.
On the BS-GR-40, mixed equipment can be listed on one enquiry.
Packing follows sea-freight practice for the chosen chassis.
The serial number identifies the build when parts are ordered later.
The parts manual lists the wear items and their reference views.
Ask for the specific certificate required for your target country.
Questions
The specification sheet lists 1200 for this build. Send the rack beam and door heights together to size the mast.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Vacuum lifters related models
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.