Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

SEP2-2.7/ 3.3 — aerial work platform

SEP2-2.7/ 3.3 Scissor Lift, rated capacity 200 kg. Scissor and boom platforms suit positions a ladder cannot reach safely.

SEP2-2.7/ 3.3 aerial work platform — product photo 1 of 2

Ordering facts for the SEP2-2.7/ 3.3

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

SEP2-2.7/ 3.3 specification

Values are copied from the source record in their original order and units.

SEP2-2.7/ 3.3 specification table
ParameterValue
Model No.SEP2-2.7 / SEP2-3.3
Max. Platform Height2720 / 3300 mm
Max. Machine Height4020 / 4900
Ground Clearance30
Lift Rated Capacity200 kg
Platform Size600 × 600 / 600 × 640 mm
Lifting Motor/ 12/1.5
Aneroid Battery/ 12/120
Charger/ 12/15
Overall Length1300 mm
Overall Width760 / 840
Overall Height1760 / 2040
Overall Net Weight270 / 320 kg
Request price Datasheet (print / save as PDF) Ask about voltage

Gallery

Product photographs

All detail images published for this model.

What this model is built to do

SEP2-2.7/ 3.3 Scissor Lift, part of the Aerial work platforms line.

Scissor, boom and vertical-mast platforms for maintenance, fit-out and installation heights.

Inspection at height

Published figures for this build: rated capacity 200 kg, overall width 760 / 840.

Guard rails and a platform replace climbing on racking or frames.

The platform size matches the operator, tools and load carried up.

Aerial platforms lift an operator and tools to a working height.

Guard rails and a platform replace climbing on racking or frames.

State any attachment required alongside the base model. Confirm the aisle width against the pallet depth before choosing a chassis.

Specification walk-through

The specification sheet records Model No.: SEP2-2.7 / SEP2-3.3; Max. Platform Height (mm): 2720 / 3300 mm; Max. Machine Height: 4020 / 4900; Ground Clearance: 30; Lift Rated Capacity (kg): 200 kg; Platform Size (mm): 600 × 600 / 600 × 640 mm.

The specification sheet records Lifting Motor (v/kw): / 12/1.5; Aneroid Battery (v/ah): / 12/120; Charger (v/a): / 12/15; Overall Length (mm): 1300 mm; Overall Width: 760 / 840; Overall Height: 1760 / 2040.

The specification sheet records Overall Net Weight (kg): 270 / 320 kg.

Options and attachments are listed separately from the base chassis.

Each row in the table keeps the label and value from the source record.

An em dash marks a value the source record did not publish.

Units are copied as published; convert them only when comparing models.

How to specify the right build

Configuration follows the load, working height and site layout.

Send pallet size, door height and aisle width with the enquiry.

Dimensions in the table come from the source record.

Review the tyre type against the surface the machine will run on.

Compare capacity first, then the lift height the job actually needs.

Compare the lowered height against the lowest door on the route.

Match the power arrangement to the shifts and the working environment.

  • State the shifts per day so the power arrangement can be sized properly.
  • Send those figures with the model code; the reply confirms whether the chassis suits.
  • Mark the stations where loads are picked up and dropped off each shift.

Site preparation and operating notes

On the SEP2-2.7/ 3.3, send photographs of the racking and the existing working area when possible.

Note any slope, threshold or step along the working route.

On the SEP2-2.7/ 3.3, describe the floor surface: sealed concrete, asphalt, gravel or packed earth.

Check the lowest door, beam height and aisle the truck has to pass through.

On the SEP2-2.7/ 3.3, check headroom under beams, pipes and door frames along the route.

Operation and routine checks

On the SEP2-2.7/ 3.3, unusual noise or movement is reported before further use.

Loads are kept low while travelling between stations.

On the SEP2-2.7/ 3.3, the operator checks load stability before each lift or move.

Attachments are secured before the machine leaves the station.

How this model fits the operation

On the SEP2-2.7/ 3.3, related models in the same group are listed on the family page.

A mixed enquiry can list this model together with other families.

On the SEP2-2.7/ 3.3, spare parts for wear items follow the parts manual after delivery.

The layout drawing shows where each machine sits in the operation.

Working conditions and honest limits

On the SEP2-2.7/ 3.3, dimensions are checked against the source record before quoting.

Attachments are quoted separately once the base chassis is fixed.

On the SEP2-2.7/ 3.3, capacity above the rated lift height follows the mast curve.

Site conditions such as gradient, dust and moisture belong in the enquiry.

Delivery, documents and support

On the SEP2-2.7/ 3.3, documents issued for an order are listed in the quotation.

Wear parts are supplied after delivery against the parts manual.

On the SEP2-2.7/ 3.3, loading is recorded before the container is sealed.

Quote the serial number and component name when ordering spares.

The operation material covers controls, checks and routine service points.

Test and conformity documents follow the model and destination market.

The serial number identifies the build when parts are ordered later.

Before you order

  • The rated load applies at the standard load centre; carrying the load farther forward reduces the figure marked on the chassis plate.
  • Dimensions in the specification come from the source record — check them against the container door, the lowest door on the route and the aisle before ordering.
  • Any clamp, sideshift or rotator changes the load centre and must be listed alongside the base model.
  • The certificate set for an order follows the destination market; ISO factory certificates and the serial list ship with the consignment.
  • Spare parts follow the parts manual supplied with the machine; quote the serial number and component name when ordering wear parts.

Questions

Questions buyers ask before ordering

What load does the SEP2-2.7/ 3.3 carry?+

The listed rated capacity is 200 kg at the standard load centre. Above the rated lift height capacity derates along the mast curve.

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

What does the price depend on?+

Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.

What is the minimum order quantity?+

The minimum order quantity is one set, and mixed models can be combined in one container.

How is payment arranged?+

Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Aerial work platforms related models

ModelCapacityLiftPowerTypical use
AWP———Inspection at height
AWP6-2000~12-2000———Elevated maintenance work
GTZZ**D———Elevated maintenance work
GTZZ16———Fit-out and installation
GTZZ18227—12 VElevated maintenance work

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.