Mobile Aluminum Work Platform AWP Mobile Aluminum Work Platform AWP, rated capacity 200. Outdoor use depends on ground firmness and wind exposure on site.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | AWP6-2000; AWP8-2000; AWP10-2000; AWP12-2000 |
| Mast | Double mast |
| Max. Platform H | AWP6-2000: 6000; AWP8-2000: 8000; AWP10-2000: 10000; AWP12-2000: 12000 |
| Max. Working H | AWP6-2000: 8000; AWP8-2000: 10000; AWP10-2000: 12000; AWP12-2000: 14000 |
| Ground Clearance | 60 |
| Lift Rated Capacity | 200 |
| Platform Size | AWP6-2000: 1120*600; AWP8-2000: 1120*600; AWP10-2000: 1360*600; AWP12-2000: 1480*600 |
| Voltage AC | 220 |
| Motor AC | 1.1 |
| Battery | 24/80 |
| Motor DC | AWP6-2000: 24/0.8; AWP8-2000: 24/0.8; AWP10-2000: 24/0.8; AWP12-2000: 24/2.2 |
| Outspread Size | AWP6-2000: 1890*1830; AWP8-2000: 1890*1830; AWP10-2000: 2270*2080; AWP12-2000: 2430*2200 |
| Overall Length | AWP6-2000: 1320; AWP8-2000: 1320; AWP10-2000: 1550; AWP12-2000: 1680 |
| Overall Width | AWP6-2000: 920; AWP8-2000: 920; AWP10-2000: 970; AWP12-2000: 970 |
| Overall Height | AWP6-2000: 1650; AWP8-2000: 2000; AWP10-2000: 2000; AWP12-2000: 2000 |
| Net Weight | AWP6-2000: 420; AWP8-2000: 490; AWP10-2000: 590; AWP12-2000: 640 |
Gallery
All detail images published for this model.



Mobile Aluminum Work Platform AWP Mobile Aluminum Work Platform AWP, part of the Aerial work platforms line.
Scissor, boom and vertical-mast platforms for maintenance, fit-out and installation heights.
Platform-based height work
Published figures for this build: rated capacity 200 kg, overall width AWP6-2000: 920; AWP8-2000: 920; AWP10-2000: 970; AWP12-2000: 970.
Guard rails and a platform replace climbing on racking or frames.
Outdoor use depends on ground firmness and wind exposure on site.
Aerial platforms lift an operator and tools to a working height.
Scissor and boom platforms suit positions a ladder cannot reach safely.
Describe the shifts per day when the power arrangement is selected. Check closed mast or chassis height against the lowest door on the route.
The specification sheet records Model: AWP6-2000; AWP8-2000; AWP10-2000; AWP12-2000; Mast: Double mast; Max. Platform H (mm): AWP6-2000: 6000; AWP8-2000: 8000; AWP10-2000: 10000; AWP12-2000: 12000; Max. Working H (mm): AWP6-2000: 8000; AWP8-2000: 10000; AWP10-2000: 12000; AWP12-2000: 14000; Ground Clearance (mm): 60; Lift Rated Capacity (kg): 200.
The specification sheet records Platform Size (mm): AWP6-2000: 1120*600; AWP8-2000: 1120*600; AWP10-2000: 1360*600; AWP12-2000: 1480*600; Voltage AC (v): 220; Motor AC (v/kw): 1.1; Battery (v/ah): 24/80; Motor DC (v/kw): AWP6-2000: 24/0.8; AWP8-2000: 24/0.8; AWP10-2000: 24/0.8; AWP12-2000: 24/2.2; Outspread Size (mm): AWP6-2000: 1890*1830; AWP8-2000: 1890*1830; AWP10-2000: 2270*2080; AWP12-2000: 2430*2200.
The specification sheet records Overall Length (mm): AWP6-2000: 1320; AWP8-2000: 1320; AWP10-2000: 1550; AWP12-2000: 1680; Overall Width (mm): AWP6-2000: 920; AWP8-2000: 920; AWP10-2000: 970; AWP12-2000: 970; Overall Height (mm): AWP6-2000: 1650; AWP8-2000: 2000; AWP10-2000: 2000; AWP12-2000: 2000; Net Weight (kg): AWP6-2000: 420; AWP8-2000: 490; AWP10-2000: 590; AWP12-2000: 640.
Rated figures apply at the standard load centre unless a row says otherwise.
Options and attachments are listed separately from the base chassis.
Units are copied as published; convert them only when comparing models.
Those missing values can be requested directly through the enquiry form.
Configuration follows the load, working height and site layout.
Door and beam heights decide which mast will clear the route.
Measure the pallet footprint before the chassis is shortlisted.
Check the machine weight against floor loading where the site is raised.
Note any attachment that changes the load centre or the overall width.
Match the power arrangement to the shifts and the working environment.
Compare the lowered height against the lowest door on the route.
On the Mobile Aluminum Work Platform AWP, send photographs of the racking and the existing working area when possible.
Mark the stations where loads are picked up and dropped off each shift.
On the Mobile Aluminum Work Platform AWP, state the shifts per day so the power arrangement can be sized properly.
Describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
On the Mobile Aluminum Work Platform AWP, check headroom under beams, pipes and door frames along the route.
On the Mobile Aluminum Work Platform AWP, the operator checks load stability before each lift or move.
Unusual noise or movement is reported before further use.
On the Mobile Aluminum Work Platform AWP, the operator follows the rated capacity marked on the chassis.
The working area is kept clear of loose packaging and obstacles.
On the Mobile Aluminum Work Platform AWP, the layout drawing shows where each machine sits in the operation.
Attachments such as clamps or rotators are matched to the load shape.
On the Mobile Aluminum Work Platform AWP, the receiving side pairs it with a dock ramp or platform where needed.
A mixed enquiry can list this model together with other families.
On the Mobile Aluminum Work Platform AWP, tyre choice should match the floor rather than the price list.
The signed datasheet issued with the quotation is the binding version.
On the Mobile Aluminum Work Platform AWP, the specification sheet is the binding reference for listed values.
Site conditions such as gradient, dust and moisture belong in the enquiry.
On the Mobile Aluminum Work Platform AWP, the booking reference is issued with the proforma invoice.
Loading is recorded before the container is sealed.
On the Mobile Aluminum Work Platform AWP, the enquiry should include the quantity and destination port.
Quote the serial number and component name when ordering spares.
The parts manual lists the wear items and their reference views.
Ask for the specific certificate required for your target country.
The serial number identifies the build when parts are ordered later.
Questions
The listed rated capacity is 200 at the standard load centre. Above the rated lift height capacity derates along the mast curve.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Aerial work platforms related models
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.