Mini Vacuum lifter 200kgs Mini Vacuum lifter 200kgs, rated capacity 200 kg, lift height 2750. Pads are matched to the sheet surface and the load weight.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | WCR-GR200 |
| Capacity | 200 |
| Manuel rotate | ° 360 |
| Lifting height | 2750 |
| Battery | 2*12/35 |
| Charger | 24/8 |
| Drive motor | V/W 24/750 |
| Lifting motor | V/W 24/1500 |
| Width | 620 |
| Length | 2350 |
| Front Wheel size | 300*80 |
| Real wheel size | 210*70 |
| Suction cup | 250 / 4 |
Gallery
All detail images published for this model.




Mini Vacuum lifter 200kgs Mini Vacuum lifter 200kgs, part of the Vacuum lifters line.
Vacuum suction lifters and frames for glass, stone, metal sheet and panel installation.
Metal sheet lifting
Published figures for this build: rated capacity 200 kg, lift height 2750.
Vacuum lifters grip smooth sheets by suction pad, without hooks or slings.
Pads are matched to the sheet surface and the load weight.
Pads are matched to the sheet surface and the load weight.
Rotation and tilting let one operator place a panel into a rack.
Compare rated capacity against the heaviest single load you move. Describe the shifts per day when the power arrangement is selected.
The specification sheet records Model: WCR-GR200; Capacity (kg): 200; Manuel rotate: ° 360; Lifting height (mm): 2750; Battery (v/a): 2*12/35; Charger (v/a): 24/8.
The specification sheet records Drive motor: V/W 24/750; Lifting motor: V/W 24/1500; Width (mm): 620; Length (mm): 2350; Front Wheel size (mm): 300*80; Real wheel size (mm): 210*70.
The specification sheet records Suction cup (mm): 250 / 4.
Options and attachments are listed separately from the base chassis.
Rated figures apply at the standard load centre unless a row says otherwise.
Each row in the table keeps the label and value from the source record.
An em dash marks a value the source record did not publish.
Configuration follows the load, working height and site layout.
The enquiry should list any attachment the job requires.
Send pallet size, door height and aisle width with the enquiry.
Compare capacity first, then the lift height the job actually needs.
Compare the lowered height against the lowest door on the route.
List the models that clear each constraint before asking for a quote.
Review the tyre type against the surface the machine will run on.
On the Mini Vacuum lifter 200kgs, state the shifts per day so the power arrangement can be sized properly.
List the attachments required, such as clamps, sideshift or rotator.
On the Mini Vacuum lifter 200kgs, note any slope, threshold or step along the working route.
Describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
On the Mini Vacuum lifter 200kgs, mark the stations where loads are picked up and dropped off each shift.
On the Mini Vacuum lifter 200kgs, unusual noise or movement is reported before further use.
Routine checks cover tyres, brakes, controls and visible leaks.
On the Mini Vacuum lifter 200kgs, attachments are secured before the machine leaves the station.
The operator follows the rated capacity marked on the chassis.
On the Mini Vacuum lifter 200kgs, spare parts for wear items follow the parts manual after delivery.
This machine usually works alongside pallet trucks and stacking equipment.
On the Mini Vacuum lifter 200kgs, a mixed enquiry can list this model together with other families.
Storage cages and racking organise the loads it moves between stations.
On the Mini Vacuum lifter 200kgs, tyre choice should match the floor rather than the price list.
The specification sheet is the binding reference for listed values.
On the Mini Vacuum lifter 200kgs, attachments are quoted separately once the base chassis is fixed.
Site conditions such as gradient, dust and moisture belong in the enquiry.
On the Mini Vacuum lifter 200kgs, the operation and parts material travel with the machine.
Wear parts are supplied after delivery against the parts manual.
On the Mini Vacuum lifter 200kgs, quotations follow the model, listed specification and destination port.
Loading is recorded before the container is sealed.
The parts manual lists the wear items and their reference views.
Ask for the specific certificate required for your target country.
The operation material covers controls, checks and routine service points.
Questions
The listed rated capacity is 200 kg at the standard load centre. Above the rated lift height capacity derates along the mast curve.
The specification sheet lists 2750 for this build. Send the rack beam and door heights together to size the mast.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Vacuum lifters related models
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.