Mini manual vacuum lifter Mini manual vacuum lifter, rated capacity 200 kg. Seal condition is checked before each lift on a smooth surface.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | RBN200 |
| Capacity | 200 |
| Safe load capacity | 100/200 |
| Suction Cup | Dia 250*4 |
| Min frame size | 870*600 |
| Battery | 12/7 |
| Charger | V/W 12/2 |
| Rotate | V/W Manual 360° |
| Side turning | Manual 90° |
Gallery
All detail images published for this model.


Mini manual vacuum lifter Mini manual vacuum lifter, part of the Vacuum lifters line.
Vacuum suction lifters and frames for glass, stone, metal sheet and panel installation.
Board and panel placement
Published figures for this build: rated capacity 200 kg.
Vacuum lifters grip smooth sheets by suction pad, without hooks or slings.
Rotation and tilting let one operator place a panel into a rack.
Seal condition is checked before each lift on a smooth surface.
Pads are matched to the sheet surface and the load weight.
Confirm the charger voltage or fuel type for your destination country. Describe the shifts per day when the power arrangement is selected.
The specification sheet records Model: RBN200; Capacity (kg): 200; Safe load capacity (kg): 100/200; Suction Cup (mm): Dia 250*4; Min frame size (v/a): 870*600; Battery (v/a): 12/7.
The specification sheet records Charger: V/W 12/2; Rotate: V/W Manual 360°; Side turning (mm): Manual 90°.
Units are copied as published; convert them only when comparing models.
Options and attachments are listed separately from the base chassis.
Each row in the table keeps the label and value from the source record.
Rated figures apply at the standard load centre unless a row says otherwise.
Configuration follows the load, working height and site layout.
Send pallet size, door height and aisle width with the enquiry.
Dimensions in the table come from the source record.
Match the power arrangement to the shifts and the working environment.
Check the machine weight against floor loading where the site is raised.
Check the chassis width against the aisle and the container door.
List the models that clear each constraint before asking for a quote.
On the Mini manual vacuum lifter, note any slope, threshold or step along the working route.
Mark the stations where loads are picked up and dropped off each shift.
On the Mini manual vacuum lifter, measure the pallet footprint and the heaviest single load before comparing models.
Check headroom under beams, pipes and door frames along the route.
On the Mini manual vacuum lifter, list the attachments required, such as clamps, sideshift or rotator.
On the Mini manual vacuum lifter, attachments are secured before the machine leaves the station.
The operator checks load stability before each lift or move.
On the Mini manual vacuum lifter, unusual noise or movement is reported before further use.
The working area is kept clear of loose packaging and obstacles.
On the Mini manual vacuum lifter, spare parts for wear items follow the parts manual after delivery.
This machine usually works alongside pallet trucks and stacking equipment.
On the Mini manual vacuum lifter, the receiving side pairs it with a dock ramp or platform where needed.
Storage cages and racking organise the loads it moves between stations.
On the Mini manual vacuum lifter, site conditions such as gradient, dust and moisture belong in the enquiry.
The signed datasheet issued with the quotation is the binding version.
On the Mini manual vacuum lifter, tyre choice should match the floor rather than the price list.
Any option not listed should be confirmed in writing before order.
On the Mini manual vacuum lifter, the operation and parts material travel with the machine.
The booking reference is issued with the proforma invoice.
On the Mini manual vacuum lifter, documents issued for an order are listed in the quotation.
Quote the serial number and component name when ordering spares.
The parts manual lists the wear items and their reference views.
The serial number identifies the build when parts are ordered later.
Test and conformity documents follow the model and destination market.
Questions
The listed rated capacity is 200 kg at the standard load centre. Above the rated lift height capacity derates along the mast curve.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Vacuum lifters related models
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.