mini 400kg vacuum suction cup glass lifter mini 400kg vacuum suction cup glass lifter, 24V. Seal condition is checked before each lift on a smooth surface.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | RYF300/400 |
| Work load limit | 300/400 kg |
| Net weight | 80/150 kg |
| Diameter of suction cup | 8”(200mm) |
| Number of suction cups | 4/6pcs |
| Minimum glass dimension | 29 1/2”×33 1/2” (750mm×850mm) |
| Battery | 24V |
| Vertical height | 2400mm or customised |
Gallery
All detail images published for this model.







mini 400kg vacuum suction cup glass lifter mini 400kg vacuum suction cup glass lifter, part of the Vacuum lifters line.
Vacuum suction lifters and frames for glass, stone, metal sheet and panel installation.
Glass and sheet installation
The lifter pairs with a crane, forklift attachment or its own battery frame.
Vacuum lifters grip smooth sheets by suction pad, without hooks or slings.
Pads are matched to the sheet surface and the load weight.
Glass, stone, metal sheet and plasterboard are handled with pad frames.
Confirm the aisle width against the pallet depth before choosing a chassis. Compare rated capacity against the heaviest single load you move.
The specification sheet records Model: RYF300/400; Work load limit (kg): 300/400 kg; Net weight (kg): 80/150 kg; Diameter of suction cup: 8”(200mm); Number of suction cups: 4/6pcs; Minimum glass dimension: 29 1/2”×33 1/2” (750mm×850mm).
The specification sheet records Battery: 24V; Vertical height: 2400mm or customised.
An em dash marks a value the source record did not publish.
Those missing values can be requested directly through the enquiry form.
Options and attachments are listed separately from the base chassis.
Rated figures apply at the standard load centre unless a row says otherwise.
For an electric chassis, the main choices are battery capacity, mast type and attachment.
The enquiry should list any attachment the job requires.
Dimensions in the table come from the source record.
Compare the lowered height against the lowest door on the route.
Note any attachment that changes the load centre or the overall width.
List the models that clear each constraint before asking for a quote.
Match the power arrangement to the shifts and the working environment.
On the mini 400kg vacuum suction cup glass lifter, mark the stations where loads are picked up and dropped off each shift.
Check the lowest door, beam height and aisle the truck has to pass through.
On the mini 400kg vacuum suction cup glass lifter, describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
Note any slope, threshold or step along the working route.
On the mini 400kg vacuum suction cup glass lifter, send photographs of the racking and the existing working area when possible.
On the mini 400kg vacuum suction cup glass lifter, the operator checks load stability before each lift or move.
Battery or fuel levels are checked at the start of each shift.
On the mini 400kg vacuum suction cup glass lifter, the operator follows the rated capacity marked on the chassis.
Attachments are secured before the machine leaves the station.
On the mini 400kg vacuum suction cup glass lifter, spare parts for wear items follow the parts manual after delivery.
The layout drawing shows where each machine sits in the operation.
On the mini 400kg vacuum suction cup glass lifter, attachments such as clamps or rotators are matched to the load shape.
The receiving side pairs it with a dock ramp or platform where needed.
On the mini 400kg vacuum suction cup glass lifter, any option not listed should be confirmed in writing before order.
Capacity above the rated lift height follows the mast curve.
On the mini 400kg vacuum suction cup glass lifter, the specification sheet is the binding reference for listed values.
Site conditions such as gradient, dust and moisture belong in the enquiry.
On the mini 400kg vacuum suction cup glass lifter, quote the serial number and component name when ordering spares.
Quotations follow the model, listed specification and destination port.
On the mini 400kg vacuum suction cup glass lifter, loading is recorded before the container is sealed.
The enquiry should include the quantity and destination port.
Test and conformity documents follow the model and destination market.
The parts manual lists the wear items and their reference views.
The operation material covers controls, checks and routine service points.
Questions
The listed power arrangement is 24V. Confirm the supply voltage or fuel type for your site before ordering.
The specification lists 24V. Battery choice depends on shifts per day and spare battery needs.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Vacuum lifters related models
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.