LPG&Gasoline Forklift FY50 FY60 LPG&Gasoline Forklift FY50 FY60, LPG LPG LPG, lift height 3000. Tank refilling and exchange are arranged around the local fuel supply.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Unit | FY50 | FY60 | FY70 |
|---|---|---|---|---|
| Model | — | FY50 | FY60 | FY70 |
| Power Type | — | LPG | LPG | LPG |
| Drive Type | — | Sit | Sit | Sit |
| Load Capacity | kg | 5000 | 6000 | 7000 |
| Load centre | mm | 600 | 600 | 600 |
| Tyre Type | — | Pneumatic Tyre Pneumatic Tyre Pneumatic Tyre | ||
| Front Tyre | — | 8.25-15-14PR | 8.25-15-14PR | 8.25-15-14PR |
| Rear Tyre | — | 8.25-15-14PR | 8.25-15-14PR | 8.25-15-14PR |
| Lift Height | mm | 3000 | 3000 | 3000 |
| Fork Size | — | L×W×T mm 1220×150×60 1220×150×60 1220×150×70 | ||
| Mast Tilt Angle | — | F/R . 6/12 6/12 6/12 | ||
| Mast Lowered Height | mm | 2500 | 2500 | 2500 |
| Mast Extended Height | with backrest | 4415 | 4415 | 4415 |
| Length to face of fork | Without fork | 3450 | 3450 | 3560 |
| Overall Width | mm | 2010 | 2010 | 2010 |
| Overhead Guard Height | mm | 2470 | 2470 | 2470 |
Gallery
All detail images published for this model.

LPG&Gasoline Forklift FY50 FY60 LPG&Gasoline Forklift FY50 FY60, part of the LPG and gas forklift trucks line.
LPG and gasoline counterbalance trucks for mixed indoor-outdoor operation.
Mixed-fleet dock work
Published figures for this build: rated capacity 5000 6000 7000 kg, lift height 3000 3000 3000 mm, overall width 2010 2010 2010 mm, tyre pneumatic tyre pneumatic tyre pneumatic tyre.
Mixed indoor-outdoor duty cycles are the usual reason to look at gas.
Tank refilling and exchange are arranged around the local fuel supply.
Mixed indoor-outdoor duty cycles are the usual reason to look at gas.
An LPG chassis uses a fuel tank instead of a diesel or battery compartment.
State any attachment required alongside the base model. Describe the shifts per day when the power arrangement is selected.
The specification sheet records Model: FY50 / FY60 / FY70; Power Type: LPG / LPG / LPG; Drive Type: Sit / Sit / Sit; Load Capacity (kg): 5000 / 6000 / 7000; Load centre (mm): 600 / 600 / 600; Specification is not published in the source record.
The specification sheet records Tyre Type: Pneumatic Tyre Pneumatic Tyre Pneumatic Tyre; Front Tyre: 8.25-15-14PR / 8.25-15-14PR / 8.25-15-14PR; Rear Tyre: 8.25-15-14PR / 8.25-15-14PR / 8.25-15-14PR; Specification is not published in the source record; Lift Height (mm): 3000 / 3000 / 3000; Fork Size: L×W×T mm 1220×150×60 1220×150×60 1220×150×70.
The specification sheet records Mast Tilt Angle: F/R . 6/12 6/12 6/12; Mast Lowered Height (mm): 2500 / 2500 / 2500; Mast Extended Height (with backrest): 4415 / 4415 / 4415; Length to face of fork (Without fork): 3450 / 3450 / 3560; Overall Width (mm): 2010 / 2010 / 2010; Overhead Guard Height (mm): 2470 / 2470 / 2470.
Units are copied as published; convert them only when comparing models.
Options and attachments are listed separately from the base chassis.
Those missing values can be requested directly through the enquiry form.
Rated figures apply at the standard load centre unless a row says otherwise.
For an internal combustion chassis, engine, tyre type and mast move the price most.
Measure the pallet footprint before the chassis is shortlisted.
The listed figures follow the record; options are confirmed on the quotation.
Compare capacity first, then the lift height the job actually needs.
List the models that clear each constraint before asking for a quote.
Review the tyre type against the surface the machine will run on.
Match the power arrangement to the shifts and the working environment.
On the LPG&Gasoline Forklift FY50 FY60, measure the pallet footprint and the heaviest single load before comparing models.
Keep the charging or refuelling position clear of the main traffic aisle.
On the LPG&Gasoline Forklift FY50 FY60, send photographs of the racking and the existing working area when possible.
Mark the stations where loads are picked up and dropped off each shift.
On the LPG&Gasoline Forklift FY50 FY60, check headroom under beams, pipes and door frames along the route.
On the LPG&Gasoline Forklift FY50 FY60, routine checks cover tyres, brakes, controls and visible leaks.
The operator checks load stability before each lift or move.
On the LPG&Gasoline Forklift FY50 FY60, the operator follows the rated capacity marked on the chassis.
Unusual noise or movement is reported before further use.
On the LPG&Gasoline Forklift FY50 FY60, the layout drawing shows where each machine sits in the operation.
Related models in the same group are listed on the family page.
On the LPG&Gasoline Forklift FY50 FY60, attachments such as clamps or rotators are matched to the load shape.
This machine usually works alongside pallet trucks and stacking equipment.
On the LPG&Gasoline Forklift FY50 FY60, attachments are quoted separately once the base chassis is fixed.
Dimensions are checked against the source record before quoting.
On the LPG&Gasoline Forklift FY50 FY60, any option not listed should be confirmed in writing before order.
Capacity above the rated lift height follows the mast curve.
On the LPG&Gasoline Forklift FY50 FY60, quote the serial number and component name when ordering spares.
Wear parts are supplied after delivery against the parts manual.
On the LPG&Gasoline Forklift FY50 FY60, mixed equipment can be listed on one enquiry.
Packing follows sea-freight practice for the chosen chassis.
The serial number identifies the build when parts are ordered later.
The operation material covers controls, checks and routine service points.
The parts manual lists the wear items and their reference views.
Questions
The specification sheet lists 3000 for this build. Send the rack beam and door heights together to size the mast.
The listed power arrangement is LPG LPG LPG. Confirm the supply voltage or fuel type for your site before ordering.
The listed tyre type is Pneumatic Tyre Pneumatic Tyre Pneumatic Tyre. Solid tyres suit sealed concrete; pneumatic tyres suit rough outdoor ground.
The specification lists a load centre of 600. Loads carried farther forward reduce rated capacity.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
LPG and gas forklift trucks related models
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.