Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

LG25GLT LG30GLT — LPG counterbalance forklift

LG25GLT LG30GLT LPG & Gas Forklift, LPG&Gasoline, lift height 3000 mm. Gas power suits sites that alternate between yard and covered unloading.

LG25GLT LG30GLT LPG counterbalance forklift — product photo 1 of 3
Why buyers pick this class Full specification →

Ordering facts for the LG25GLT LG30GLT

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

LG25GLT LG30GLT specification

Values are copied from the source record in their original order and units.

LG25GLT LG30GLT specification table
ParameterValue
ModelFY30 / FY35
Power TypeLPG&Gasoline
Drive TypeSit
Load Capacity3000 / 3500 kg
Load centre500 mm
Tyre TypePneumatic Tyre
Front Tyre28*9-15-12PR
Rear Tyre6.50-10-10PR
Lift Height3000 mm
Fork SizeL×W×T / mm / 1070*125*45 / 1070*125*50
Mast Tilt Angle6/12
Mast Lowered Height2115 mm
Mast Extended Height4175 / 4150 mm
Length to face of fork2710 / 2750 mm
Overall Width1225 mm
Overhead Guard Height2090 mm
Request price Datasheet (print / save as PDF) Ask about fuel type

Gallery

Product photographs

All detail images published for this model.

What this model is built to do

LG25GLT LG30GLT LPG & Gas Forklift, part of the LPG and gas forklift trucks line.

LPG and gasoline counterbalance trucks for mixed indoor-outdoor operation.

Semi-outdoor storage duty

Published figures for this build: rated capacity 3000 / 3500 kg, lift height 3000 mm, overall width 1225 mm, tyre pneumatic tyre.

The gas option works where diesel fumes are not acceptable indoors.

LPG trucks split outdoor grip and cleaner indoor exhaust.

LPG trucks split outdoor grip and cleaner indoor exhaust.

Gas power suits sites that alternate between yard and covered unloading.

Describe the shifts per day when the power arrangement is selected. Note cold store, outdoor gradient or container entry as a constraint.

Specification walk-through

The specification sheet records Specification is not published in the source record; Model: FY30 / FY35; Power Type: LPG&Gasoline; Drive Type: Sit; Load Capacity (kg): 3000 / 3500 kg; Load centre (mm): 500 mm.

The specification sheet records Specification is not published in the source record; Tyre Type: Pneumatic Tyre; Front Tyre: 28*9-15-12PR; Rear Tyre: 6.50-10-10PR; Specification is not published in the source record; Lift Height (mm): 3000 mm.

The specification sheet records Fork Size: L×W×T / mm / 1070*125*45 / 1070*125*50; Mast Tilt Angle (f/r): 6/12; Mast Lowered Height (mm): 2115 mm; Mast Extended Height (with backrest): 4175 / 4150 mm; Length to face of fork (Without fork): 2710 / 2750 mm; Overall Width (mm): 1225 mm.

The specification sheet records Overhead Guard Height (mm): 2090 mm.

Units are copied as published; convert them only when comparing models.

Rated figures apply at the standard load centre unless a row says otherwise.

Options and attachments are listed separately from the base chassis.

Each row in the table keeps the label and value from the source record.

How to specify the right build

For an internal combustion chassis, engine, tyre type and mast move the price most.

The listed figures follow the record; options are confirmed on the quotation.

Send pallet size, door height and aisle width with the enquiry.

Compare the lowered height against the lowest door on the route.

Match the power arrangement to the shifts and the working environment.

List the models that clear each constraint before asking for a quote.

Note any attachment that changes the load centre or the overall width.

  • Note any constraint: low door, narrow aisle, cold store, outdoor gradient or entry.
  • Send those figures with the model code; the reply confirms whether the chassis suits.
  • Mark the stations where loads are picked up and dropped off each shift.

Site preparation and operating notes

On the LG25GLT LG30GLT, check the lowest door, beam height and aisle the truck has to pass through.

Note any slope, threshold or step along the working route.

On the LG25GLT LG30GLT, measure the pallet footprint and the heaviest single load before comparing models.

State the shifts per day so the power arrangement can be sized properly.

On the LG25GLT LG30GLT, list the attachments required, such as clamps, sideshift or rotator.

Operation and routine checks

On the LG25GLT LG30GLT, the working area is kept clear of loose packaging and obstacles.

The operator checks load stability before each lift or move.

On the LG25GLT LG30GLT, routine checks cover tyres, brakes, controls and visible leaks.

Attachments are secured before the machine leaves the station.

How this model fits the operation

On the LG25GLT LG30GLT, related models in the same group are listed on the family page.

Storage cages and racking organise the loads it moves between stations.

On the LG25GLT LG30GLT, this machine usually works alongside pallet trucks and stacking equipment.

Spare parts for wear items follow the parts manual after delivery.

Working conditions and honest limits

On the LG25GLT LG30GLT, tyre choice should match the floor rather than the price list.

Attachments are quoted separately once the base chassis is fixed.

On the LG25GLT LG30GLT, dimensions are checked against the source record before quoting.

The specification sheet is the binding reference for listed values.

Delivery, documents and support

On the LG25GLT LG30GLT, quote the serial number and component name when ordering spares.

The operation and parts material travel with the machine.

On the LG25GLT LG30GLT, loading is recorded before the container is sealed.

Mixed equipment can be listed on one enquiry.

The operation material covers controls, checks and routine service points.

The parts manual lists the wear items and their reference views.

The serial number identifies the build when parts are ordered later.

Before you order

  • Compare the published capacity against the heaviest single move before the mast or attachment is chosen.
  • Check overall width and turning space against the aisle and any narrow doorway before the chassis is shortlisted.
  • Attachments are quoted separately once the base chassis is fixed, so the attachment weight can be counted against the residual capacity.
  • CE or GS documentation where applicable is listed in the quotation together with the factory quality certificates.
  • The parts manual ships with the machine; identify wear items by serial number and part name when reordering.

Questions

Questions buyers ask before ordering

What lift height is available?+

The specification sheet lists 3000 mm for this build. Send the rack beam and door heights together to size the mast.

What power unit does it use?+

The listed power arrangement is LPG&Gasoline. Confirm the supply voltage or fuel type for your site before ordering.

Which tyres are fitted?+

The listed tyre type is Pneumatic Tyre. Solid tyres suit sealed concrete; pneumatic tyres suit rough outdoor ground.

What load centre applies to the rating?+

The specification lists a load centre of 500 mm. Loads carried farther forward reduce rated capacity.

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

LPG and gas forklift trucks related models

ModelCapacityLiftPowerTypical use
TFY30———Warehouse-to-yard runs
TFY100D1000——Mixed-fleet dock work
LPG&Gasoline—3000LpgMixed-fleet dock work
LPG—3000LpgGas-fuelled dock work
LPG&Gasoline—3000Lpg, GasolineWarehouse-to-yard runs

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.