TFY30 TFY50 Air/Hyd.table truck. The gas option works where diesel fumes are not acceptable indoors.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | TFY30 / TFY50 |
| Load Capacity | 300 kg, / 500 kg |
| Lowest Height | 285/380 / 290/390 mm |
| Max. Height | 900 mm |
| Table Dimensions | 820×500×50 / 820×500×55 mm |
| Total Length | 1200 mm |
| Length of Handle | 980 mm |
| Net Weight | 80 / 85 kg |
TFY30 TFY50 Air/Hyd.table truck, part of the LPG and gas forklift trucks line.
LPG and gasoline counterbalance trucks for mixed indoor-outdoor operation.
Warehouse-to-yard runs
Published figures for this build: rated capacity 300 kg, / 500 kg.
Tank refilling and exchange are arranged around the local fuel supply.
Tank refilling and exchange are arranged around the local fuel supply.
Gas power suits sites that alternate between yard and covered unloading.
Mixed indoor-outdoor duty cycles are the usual reason to look at gas.
Note cold store, outdoor gradient or container entry as a constraint. Confirm the charger voltage or fuel type for your destination country.
The specification sheet records Model: TFY30 / TFY50; Load Capacity (kg): 300 kg, / 500 kg; Lowest Height (mm): 285/380 / 290/390 mm; Max. Height (mm): 900 mm; Table Dimensions (mm): 820×500×50 / 820×500×55 mm; Total Length (mm): 1200 mm.
The specification sheet records Length of Handle (mm): 980 mm; Net Weight (kg): 80 / 85 kg.
Those missing values can be requested directly through the enquiry form.
Options and attachments are listed separately from the base chassis.
Each row in the table keeps the label and value from the source record.
An em dash marks a value the source record did not publish.
Configuration follows the load, working height and site layout.
The enquiry should list any attachment the job requires.
Send pallet size, door height and aisle width with the enquiry.
List the models that clear each constraint before asking for a quote.
Check the chassis width against the aisle and the container door.
Review the tyre type against the surface the machine will run on.
Compare capacity first, then the lift height the job actually needs.
On the TFY30 TFY50, check headroom under beams, pipes and door frames along the route.
Mark the stations where loads are picked up and dropped off each shift.
On the TFY30 TFY50, note any slope, threshold or step along the working route.
Check the lowest door, beam height and aisle the truck has to pass through.
On the TFY30 TFY50, keep the charging or refuelling position clear of the main traffic aisle.
On the TFY30 TFY50, the operator checks load stability before each lift or move.
The operator follows the rated capacity marked on the chassis.
On the TFY30 TFY50, battery or fuel levels are checked at the start of each shift.
Unusual noise or movement is reported before further use.
On the TFY30 TFY50, attachments such as clamps or rotators are matched to the load shape.
Storage cages and racking organise the loads it moves between stations.
On the TFY30 TFY50, spare parts for wear items follow the parts manual after delivery.
This machine usually works alongside pallet trucks and stacking equipment.
On the TFY30 TFY50, any option not listed should be confirmed in writing before order.
Site conditions such as gradient, dust and moisture belong in the enquiry.
On the TFY30 TFY50, capacity above the rated lift height follows the mast curve.
The signed datasheet issued with the quotation is the binding version.
On the TFY30 TFY50, documents issued for an order are listed in the quotation.
Loading is recorded before the container is sealed.
On the TFY30 TFY50, wear parts are supplied after delivery against the parts manual.
Packing follows sea-freight practice for the chosen chassis.
The serial number identifies the build when parts are ordered later.
Test and conformity documents follow the model and destination market.
The parts manual lists the wear items and their reference views.
Questions
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
LPG and gas forklift trucks related models
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.