H frame Glass vacuum lift for crane H frame Glass vacuum lift for crane. The lifter pairs with a crane, forklift attachment or its own battery frame.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | GR-HS |
| Capacity | 800 1000 1200 1400 |
| Suction cups | 8 10 12 14 |
| Dia | 300 300 300 300 |
| Rotate | 360° Manual |
| flipping | 90° Manual |
| Voltage | DC12 |
| Charger | AC220/110 |
| Weight | 160 170 180 190 |
| Packing size | 2440*1050*390 |
| extention frame | 720 |
Gallery
All detail images published for this model.


H frame Glass vacuum lift for crane H frame Glass vacuum lift for crane, part of the Vacuum lifters line.
Vacuum suction lifters and frames for glass, stone, metal sheet and panel installation.
Suction pad sheet handling
Published figures for this build: rated capacity 800 1000 1200 1400 kg.
Glass, stone, metal sheet and plasterboard are handled with pad frames.
Seal condition is checked before each lift on a smooth surface.
Glass, stone, metal sheet and plasterboard are handled with pad frames.
Glass, stone, metal sheet and plasterboard are handled with pad frames.
Match the tyre type to the floor surface rather than the price list. Check closed mast or chassis height against the lowest door on the route.
The specification sheet records Model: GR-HS; Capacity (kg): 800 1000 1200 1400; Suction cups: 8 10 12 14; Dia (mm): 300 300 300 300; Rotate: 360° Manual; flipping: 90° Manual.
The specification sheet records Voltage (v): DC12; Charger (v): AC220/110; Weight (kg): 160 170 180 190; Packing size (mm): 2440*1050*390; extention frame (mm): 720.
Those missing values can be requested directly through the enquiry form.
Options and attachments are listed separately from the base chassis.
Units are copied as published; convert them only when comparing models.
Rated figures apply at the standard load centre unless a row says otherwise.
Configuration follows the load, working height and site layout.
Send pallet size, door height and aisle width with the enquiry.
Door and beam heights decide which mast will clear the route.
Review the tyre type against the surface the machine will run on.
Check the chassis width against the aisle and the container door.
Note any attachment that changes the load centre or the overall width.
List the models that clear each constraint before asking for a quote.
On the H frame Glass vacuum lift for crane, send photographs of the racking and the existing working area when possible.
Mark the stations where loads are picked up and dropped off each shift.
On the H frame Glass vacuum lift for crane, describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
State the shifts per day so the power arrangement can be sized properly.
On the H frame Glass vacuum lift for crane, list the attachments required, such as clamps, sideshift or rotator.
On the H frame Glass vacuum lift for crane, loads are kept low while travelling between stations.
Unusual noise or movement is reported before further use.
On the H frame Glass vacuum lift for crane, the operator follows the rated capacity marked on the chassis.
The operator checks load stability before each lift or move.
On the H frame Glass vacuum lift for crane, a mixed enquiry can list this model together with other families.
The receiving side pairs it with a dock ramp or platform where needed.
On the H frame Glass vacuum lift for crane, storage cages and racking organise the loads it moves between stations.
This machine usually works alongside pallet trucks and stacking equipment.
On the H frame Glass vacuum lift for crane, any option not listed should be confirmed in writing before order.
Attachments are quoted separately once the base chassis is fixed.
On the H frame Glass vacuum lift for crane, the signed datasheet issued with the quotation is the binding version.
Dimensions are checked against the source record before quoting.
On the H frame Glass vacuum lift for crane, mixed equipment can be listed on one enquiry.
Wear parts are supplied after delivery against the parts manual.
On the H frame Glass vacuum lift for crane, packing follows sea-freight practice for the chosen chassis.
Quotations follow the model, listed specification and destination port.
Ask for the specific certificate required for your target country.
The parts manual lists the wear items and their reference views.
Test and conformity documents follow the model and destination market.
Questions
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Vacuum lifters related models
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.