FSJY0608 0810 1012 Boom lift, rated capacity 300 kg. Aerial platforms lift an operator and tools to a working height.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | FSJY0608 / FSJY0810 / FSJY1012 |
| Maximum working height | 8000 / 10000 / 12000 mm |
| Maximum platform height | 6000 / 8000 / 10000 mm |
| Folding maximum height | 2150 / 2275 / 2400 mm |
| Folding maximum height | 1190 / 1315 / 1440 mm |
| Overall Length | 2400 mm |
| Overall Width | 1150 mm |
| Platform Size | 2270×1150 mm |
| Platform extend size | 900 mm |
| Minimumground clearance | 110 mm |
| Minimumground clearance | 20 mm |
| Wheelbase | 1850 mm |
| Minimum turn radius | 0 mm |
| Minimum turn radius | 2100 mm |
| Power source | / 24/3 |
| Running speed | 4 |
| Running speed | 0.8 |
| Rising/falling speed | sec / 40/50 / 70/80 |
| Battery | / 4×6/210 |
| Charger | / 24/25 |
| Maximum climbing ability | 20 |
| Maximum working allowable angle | 2-3° |
| Way of control | Electro-hydraulic proportion control |
| Driver | Double front-wheel |
| Hydraulic drive | Double rear-wheel |
| Wheel size | Φ381×127 |
| Lifting capacity | 300 kg |
| Whole weight | 1900 kg |
Gallery
All detail images published for this model.



FSJY0608 0810 1012 Boom lift, part of the Aerial work platforms line.
Scissor, boom and vertical-mast platforms for maintenance, fit-out and installation heights.
Inspection at height
Published figures for this build: rated capacity 300 kg, overall width 1150 mm.
The platform size matches the operator, tools and load carried up.
Guard rails and a platform replace climbing on racking or frames.
Maintenance, fit-out and warehousing at height are the usual jobs.
Scissor and boom platforms suit positions a ladder cannot reach safely.
State any attachment required alongside the base model. Confirm the aisle width against the pallet depth before choosing a chassis.
The specification sheet records Model: FSJY0608 / FSJY0810 / FSJY1012; Maximum working height (mm): 8000 / 10000 / 12000 mm; Maximum platform height (mm): 6000 / 8000 / 10000 mm; Folding maximum height (guardrail unfolding): 2150 / 2275 / 2400 mm; Folding maximum height (guardrail removed): 1190 / 1315 / 1440 mm; Overall Length (mm): 2400 mm.
The specification sheet records Overall Width (mm): 1150 mm; Platform Size (mm): 2270×1150 mm; Platform extend size (mm): 900 mm; Minimumground clearance (folding): 110 mm; Minimumground clearance (rising): 20 mm; Wheelbase (mm): 1850 mm.
The specification sheet records Minimum turn radius (inner wheel): 0 mm; Minimum turn radius (outer wheel): 2100 mm; Power source (v/kw): / 24/3; Running speed (folding): 4; Running speed (rising): 0.8; Rising/falling speed: sec / 40/50 / 70/80.
The specification sheet records Battery (v/ah): / 4×6/210; Charger (v/a): / 24/25; Maximum climbing ability: 20; Maximum working allowable angle: 2-3°; Way of control: Electro-hydraulic proportion control; Driver: Double front-wheel.
The specification sheet records Hydraulic drive: Double rear-wheel; Wheel size (stuffed&no mark): Φ381×127; Lifting capacity (kg): 300 kg; Whole weight (kg): 1900 kg.
An em dash marks a value the source record did not publish.
Rated figures apply at the standard load centre unless a row says otherwise.
Units are copied as published; convert them only when comparing models.
Each row in the table keeps the label and value from the source record.
Configuration follows the load, working height and site layout.
Dimensions in the table come from the source record.
The listed figures follow the record; options are confirmed on the quotation.
Check the chassis width against the aisle and the container door.
Review the tyre type against the surface the machine will run on.
Compare the lowered height against the lowest door on the route.
Note any attachment that changes the load centre or the overall width.
On the FSJY0608 0810 1012, mark the stations where loads are picked up and dropped off each shift.
Check the lowest door, beam height and aisle the truck has to pass through.
On the FSJY0608 0810 1012, note any slope, threshold or step along the working route.
Check headroom under beams, pipes and door frames along the route.
On the FSJY0608 0810 1012, send photographs of the racking and the existing working area when possible.
On the FSJY0608 0810 1012, attachments are secured before the machine leaves the station.
The working area is kept clear of loose packaging and obstacles.
On the FSJY0608 0810 1012, battery or fuel levels are checked at the start of each shift.
The operator follows the rated capacity marked on the chassis.
On the FSJY0608 0810 1012, a mixed enquiry can list this model together with other families.
The layout drawing shows where each machine sits in the operation.
On the FSJY0608 0810 1012, the receiving side pairs it with a dock ramp or platform where needed.
Storage cages and racking organise the loads it moves between stations.
On the FSJY0608 0810 1012, the specification sheet is the binding reference for listed values.
Site conditions such as gradient, dust and moisture belong in the enquiry.
On the FSJY0608 0810 1012, dimensions are checked against the source record before quoting.
Tyre choice should match the floor rather than the price list.
On the FSJY0608 0810 1012, packing follows sea-freight practice for the chosen chassis.
Wear parts are supplied after delivery against the parts manual.
On the FSJY0608 0810 1012, the booking reference is issued with the proforma invoice.
Loading is recorded before the container is sealed.
The operation material covers controls, checks and routine service points.
The parts manual lists the wear items and their reference views.
The serial number identifies the build when parts are ordered later.
Published overall dimensions for this build are about 2.4 m long and 1.15 m wide.
On a standard 20GP dry-van floor that footprint allows about 4 unit(s) per layer; a 40HQ allows about 10 unit(s) per layer.
The count is a footprint estimate against standard dry-van internal dimensions, not a loading guarantee. Final blocking, bracing and stacking follow the loading plan confirmed before sealing, and this model can be combined with other families in one container where the floor allows.
Questions
The listed rated capacity is 300 kg at the standard load centre. Above the rated lift height capacity derates along the mast curve.
The listed service or net weight is 1900 kg. This matters for floor loading, ramps and container plans.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Aerial work platforms related models
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.