DT500 / DT500-1 Drum Equipment, rated capacity 500 kg, lift height 1450 mm. The attachment fits a pallet truck or forklift already in use.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | DT500 / DT500-1 |
| capacity | 500 kg |
| N.W. | 208 / 228 kg |
| Electric lift | yes mm |
| Weight scale | yes mm |
| Front wheel size | Φ80x60 mm |
| Back wheel size | Φ150×50 mm |
| Front leg width | 630/810 mm |
| Front leg length | 630 mm |
| Overall size | 1500*950*2100 mm |
| Turning radius | 1750 mm |
| LIfting motor | 1.5 |
| Battery | 12/120 |
| Charger | 12 v |
| scale charger | 6 v |
| Lifting height | 1450 mm |
| Lifting speed | 120 |
Gallery
All detail images published for this model.



DT500 / DT500-1 Drum Equipment, part of the Drum handlers line.
Drum carriers, clamps and rotators for lifting, tipping and moving cylindrical containers.
Chemical drum dispensing
Published figures for this build: rated capacity 500 kg, lift height 1450 mm, turning radius 1750 mm.
Chemicals, oils and food bulk packing are common drum duties.
Chemicals, oils and food bulk packing are common drum duties.
Drum handlers lift, rotate and transport drums without manual tilting.
The attachment fits a pallet truck or forklift already in use.
Match the tyre type to the floor surface rather than the price list. Note cold store, outdoor gradient or container entry as a constraint.
The specification sheet records Model: DT500 / DT500-1; capacity (kg): 500 kg; N.W. (kg): 208 / 228 kg; Electric lift (mm): yes mm; Weight scale (mm): yes mm; Front wheel size (mm): Φ80x60 mm.
The specification sheet records Back wheel size (mm): Φ150×50 mm; Front leg width (mm): 630/810 mm; Front leg length (mm): 630 mm; Overall size (mm): 1500*950*2100 mm; Turning radius (mm): 1750 mm; LIfting motor (kw/h): 1.5.
The specification sheet records Battery (v/ah): 12/120; Charger (v): 12 v; scale charger (v): 6 v; Lifting height (mm): 1450 mm; Lifting speed (mm/s): 120.
Each row in the table keeps the label and value from the source record.
Options and attachments are listed separately from the base chassis.
Units are copied as published; convert them only when comparing models.
Those missing values can be requested directly through the enquiry form.
Configuration follows the load, working height and site layout.
Door and beam heights decide which mast will clear the route.
The enquiry should list any attachment the job requires.
Review the tyre type against the surface the machine will run on.
Check the chassis width against the aisle and the container door.
Match the power arrangement to the shifts and the working environment.
Compare the lowered height against the lowest door on the route.
On the DT500 / DT500-1, note any slope, threshold or step along the working route.
List the attachments required, such as clamps, sideshift or rotator.
On the DT500 / DT500-1, measure the pallet footprint and the heaviest single load before comparing models.
Send photographs of the racking and the existing working area when possible.
On the DT500 / DT500-1, mark the stations where loads are picked up and dropped off each shift.
On the DT500 / DT500-1, the operator follows the rated capacity marked on the chassis.
The working area is kept clear of loose packaging and obstacles.
On the DT500 / DT500-1, unusual noise or movement is reported before further use.
Loads are kept low while travelling between stations.
On the DT500 / DT500-1, this machine usually works alongside pallet trucks and stacking equipment.
Attachments such as clamps or rotators are matched to the load shape.
On the DT500 / DT500-1, the layout drawing shows where each machine sits in the operation.
The receiving side pairs it with a dock ramp or platform where needed.
On the DT500 / DT500-1, site conditions such as gradient, dust and moisture belong in the enquiry.
Capacity above the rated lift height follows the mast curve.
On the DT500 / DT500-1, attachments are quoted separately once the base chassis is fixed.
Tyre choice should match the floor rather than the price list.
On the DT500 / DT500-1, loading is recorded before the container is sealed.
Quote the serial number and component name when ordering spares.
On the DT500 / DT500-1, the booking reference is issued with the proforma invoice.
Packing follows sea-freight practice for the chosen chassis.
The serial number identifies the build when parts are ordered later.
The parts manual lists the wear items and their reference views.
Test and conformity documents follow the model and destination market.
Questions
The listed rated capacity is 500 kg at the standard load centre. Above the rated lift height capacity derates along the mast curve.
The specification sheet lists 1450 mm for this build. Send the rack beam and door heights together to size the mast.
The listed turning radius is 1750 mm. Aisle width also depends on pallet depth and fork length.
The listed service or net weight is yes mm. This matters for floor loading, ramps and container plans.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.