PWSR Counter Balance Stacker, rated capacity 500 kg. Stackers work in narrow aisles where a counterbalance truck will not turn.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | PWSR-50/16 / PWSR-50/25 / PWSR-50/30 |
| Loading Capacity | 500 kg |
| Max.Lifting H. | 1600 / 2500 / 3000 mm |
| Min Mast H | 2060 / 1810 mm |
| Battery | 2 x 12V/100A |
| Lifting Motor | W / 2000 |
| Charger | 24V/15A |
| Weight | 720 / 770 / 800 kg |
| Overall Size | 1990x820x2060 mm |
Gallery
All detail images published for this model.


PWSR Counter Balance Stacker, part of the Stackers and order pickers line.
Walk-behind, ride-on and semi-electric stackers plus order picking platform trucks.
Narrow-aisle put-away
Published figures for this build: rated capacity 500 kg.
Walk-behind and stand-on stackers put loads straight onto racking.
Walk-behind and stand-on stackers put loads straight onto racking.
Stackers work in narrow aisles where a counterbalance truck will not turn.
Straddle legs carry the mast forward for a much narrower aisle.
Confirm the aisle width against the pallet depth before choosing a chassis. Describe the shifts per day when the power arrangement is selected.
The specification sheet records Model: PWSR-50/16 / PWSR-50/25 / PWSR-50/30; Loading Capacity (kg): 500 kg; Max.Lifting H. (mm): 1600 / 2500 / 3000 mm; Min Mast H (mm): 2060 / 1810 mm; Battery: 2 x 12V/100A; Lifting Motor: W / 2000.
The specification sheet records Charger: 24V/15A; Weight (kg): 720 / 770 / 800 kg; Overall Size (mm): 1990x820x2060 mm.
An em dash marks a value the source record did not publish.
Rated figures apply at the standard load centre unless a row says otherwise.
Each row in the table keeps the label and value from the source record.
Units are copied as published; convert them only when comparing models.
Configuration follows the load, working height and site layout.
Dimensions in the table come from the source record.
Send pallet size, door height and aisle width with the enquiry.
Compare capacity first, then the lift height the job actually needs.
Review the tyre type against the surface the machine will run on.
List the models that clear each constraint before asking for a quote.
Note any attachment that changes the load centre or the overall width.
On the PWSR, describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
Check the lowest door, beam height and aisle the truck has to pass through.
On the PWSR, keep the charging or refuelling position clear of the main traffic aisle.
Send photographs of the racking and the existing working area when possible.
On the PWSR, list the attachments required, such as clamps, sideshift or rotator.
On the PWSR, the operator checks load stability before each lift or move.
The working area is kept clear of loose packaging and obstacles.
On the PWSR, unusual noise or movement is reported before further use.
Loads are kept low while travelling between stations.
On the PWSR, the receiving side pairs it with a dock ramp or platform where needed.
This machine usually works alongside pallet trucks and stacking equipment.
On the PWSR, storage cages and racking organise the loads it moves between stations.
Related models in the same group are listed on the family page.
On the PWSR, the signed datasheet issued with the quotation is the binding version.
Attachments are quoted separately once the base chassis is fixed.
On the PWSR, capacity above the rated lift height follows the mast curve.
The specification sheet is the binding reference for listed values.
On the PWSR, the operation and parts material travel with the machine.
Mixed equipment can be listed on one enquiry.
On the PWSR, the enquiry should include the quantity and destination port.
The booking reference is issued with the proforma invoice.
The parts manual lists the wear items and their reference views.
The serial number identifies the build when parts are ordered later.
The operation material covers controls, checks and routine service points.
Questions
The listed rated capacity is 500 kg at the standard load centre. Above the rated lift height capacity derates along the mast curve.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.