Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

CTY-E — stacker

CTY-E Hand Stacker, lift height 1600. Stackers keep the pallet close to the legs while lifting at height.

CTY-E stacker — product photo 1 of 3

Ordering facts for the CTY-E

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

CTY-E specification

Values are copied from the source record in their original order and units.

CTY-E specification table
ParameterValue
ItemCTY-D(heavy duty frame) / CTY-E(C type frame)
Capacity1000 / 2000
Max lifting height1600
Min fork height85
fork length900
Adjustable width200-580 / 240-780 / 320-740
Outer width of legs790 / 830 / 690
front wheel size80*70 / 80*93 / 75*52
back wheel size180*50
Overall dimensions2040*790*1410 / 2050*830*1460 / 2030*780*1450
Self weight160 / 260 / 150
Request price Datasheet (print / save as PDF) Ask about configuration

Gallery

Product photographs

All detail images published for this model.

What this model is built to do

CTY-E Hand Stacker, part of the Stackers and order pickers line.

Walk-behind, ride-on and semi-electric stackers plus order picking platform trucks.

Walk-behind pallet lifting

Published figures for this build: rated capacity 1000 / 2000, lift height 1600.

Stackers work in narrow aisles where a counterbalance truck will not turn.

Stackers work in narrow aisles where a counterbalance truck will not turn.

Straddle legs carry the mast forward for a much narrower aisle.

Stackers keep the pallet close to the legs while lifting at height.

Confirm the charger voltage or fuel type for your destination country. State any attachment required alongside the base model.

Specification walk-through

The specification sheet records Item: CTY-D(heavy duty frame) / CTY-E(C type frame); Capacity (Kg): 1000 / 2000; Max lifting height (mm): 1600; Min fork height (mm): 85; fork length (mm): 900; Adjustable width (mm): 200-580 / 240-780 / 320-740.

The specification sheet records Outer width of legs (mm): 790 / 830 / 690; front wheel size (mm): 80*70 / 80*93 / 75*52; back wheel size (mm): 180*50; Overall dimensions (mm): 2040*790*1410 / 2050*830*1460 / 2030*780*1450; Self weight (kg): 160 / 260 / 150.

An em dash marks a value the source record did not publish.

Units are copied as published; convert them only when comparing models.

Those missing values can be requested directly through the enquiry form.

Each row in the table keeps the label and value from the source record.

How to specify the right build

Configuration follows the load, working height and site layout.

The listed figures follow the record; options are confirmed on the quotation.

Dimensions in the table come from the source record.

Compare the lowered height against the lowest door on the route.

Compare capacity first, then the lift height the job actually needs.

Note any attachment that changes the load centre or the overall width.

Review the tyre type against the surface the machine will run on.

  • Mark the stations where loads are picked up and dropped off each shift.
  • Note any constraint: low door, narrow aisle, cold store, outdoor gradient or entry.
  • List the load per move, lift height and floor surface before comparing models.

Site preparation and operating notes

On the CTY-E, list the attachments required, such as clamps, sideshift or rotator.

Describe the floor surface: sealed concrete, asphalt, gravel or packed earth.

On the CTY-E, mark the stations where loads are picked up and dropped off each shift.

Note any slope, threshold or step along the working route.

On the CTY-E, state the shifts per day so the power arrangement can be sized properly.

Operation and routine checks

On the CTY-E, attachments are secured before the machine leaves the station.

Unusual noise or movement is reported before further use.

On the CTY-E, loads are kept low while travelling between stations.

The operator follows the rated capacity marked on the chassis.

How this model fits the operation

On the CTY-E, the layout drawing shows where each machine sits in the operation.

The receiving side pairs it with a dock ramp or platform where needed.

On the CTY-E, storage cages and racking organise the loads it moves between stations.

Related models in the same group are listed on the family page.

Working conditions and honest limits

On the CTY-E, tyre choice should match the floor rather than the price list.

Attachments are quoted separately once the base chassis is fixed.

On the CTY-E, site conditions such as gradient, dust and moisture belong in the enquiry.

The signed datasheet issued with the quotation is the binding version.

Delivery, documents and support

On the CTY-E, packing follows sea-freight practice for the chosen chassis.

The booking reference is issued with the proforma invoice.

On the CTY-E, quote the serial number and component name when ordering spares.

Documents issued for an order are listed in the quotation.

Ask for the specific certificate required for your target country.

The parts manual lists the wear items and their reference views.

Test and conformity documents follow the model and destination market.

Before you order

  • Compare the published capacity against the heaviest single move before the mast or attachment is chosen.
  • Check overall width and turning space against the aisle and any narrow doorway before the chassis is shortlisted.
  • Attachments are quoted separately once the base chassis is fixed, so the attachment weight can be counted against the residual capacity.
  • CE or GS documentation where applicable is listed in the quotation together with the factory quality certificates.
  • Wear parts are ordered after delivery against the parts manual, the serial number and the component name.

Questions

Questions buyers ask before ordering

What lift height is available?+

The specification sheet lists 1600 for this build. Send the rack beam and door heights together to size the mast.

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

What does the price depend on?+

Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.

What is the minimum order quantity?+

The minimum order quantity is one set, and mixed models can be combined in one container.

How is payment arranged?+

Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Stackers and order pickers related models

ModelCapacityLiftPowerTypical use
PWSR500 kg——Narrow-aisle put-away
WSR1000 kg——Walk-behind pallet lifting
CTY-A—1600—Low-level pallet stacking
CTY-D—1600—Narrow-aisle put-away
CTY-EW10001600—Pallet stacking to racking

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.