WSR 100/16 100/25/ 100/30 Counter Balance Stacker, rated capacity 1000 kg. The walk-behind model leaves the operator free to guide each load.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Unit | WSR-100/16 | WSR-100/25 | WSR-100/30 |
|---|---|---|---|---|
| Model | — | WSR-100/16 | WSR-100/25 | WSR-100/30 |
| Capacity | kg | 1000 kg | ||
| Max.Lifting H. | mm | 1600 | 2500 | 3000 |
| Driving speed | km/h | 4-5 | ||
| Battery | — | 2 x DC2V/280Ah | ||
| Charger | — | DC | 24V | 40A |
| Lifting motor | — | DC | 24V | 2000W |
| Driving motor | — | DC | 24V | 1500W |
| Overall Size | mm | 2570x900x2080 / 2570x900x1830 mm | ||
WSR 100/16 100/25/ 100/30 Counter Balance Stacker, part of the Stackers and order pickers line.
Walk-behind, ride-on and semi-electric stackers plus order picking platform trucks.
Walk-behind pallet lifting
Published figures for this build: rated capacity 1000 kg.
Stackers work in narrow aisles where a counterbalance truck will not turn.
The walk-behind model leaves the operator free to guide each load.
Straddle legs carry the mast forward for a much narrower aisle.
Straddle legs carry the mast forward for a much narrower aisle.
Match the tyre type to the floor surface rather than the price list. Check closed mast or chassis height against the lowest door on the route.
The specification sheet records Model: WSR-100/16 / WSR-100/25 / WSR-100/30; Capacity (kg): 1000 kg; Max.Lifting H. (mm): 1600 / 2500 / 3000; Driving speed (km/h): 4-5; Battery: 2 x DC2V/280Ah; Charger: DC / 24V / 40A.
The specification sheet records Lifting motor: DC / 24V / 2000W; Driving motor: DC / 24V / 1500W; Overall Size (mm): 2570x900x2080 / 2570x900x1830 mm.
Rated figures apply at the standard load centre unless a row says otherwise.
Each row in the table keeps the label and value from the source record.
An em dash marks a value the source record did not publish.
Options and attachments are listed separately from the base chassis.
Configuration follows the load, working height and site layout.
The enquiry should list any attachment the job requires.
Door and beam heights decide which mast will clear the route.
Note any attachment that changes the load centre or the overall width.
Match the power arrangement to the shifts and the working environment.
Compare the lowered height against the lowest door on the route.
Review the tyre type against the surface the machine will run on.
On the WSR 100/16 100/25/ 100/30, describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
Send photographs of the racking and the existing working area when possible.
On the WSR 100/16 100/25/ 100/30, check the lowest door, beam height and aisle the truck has to pass through.
Check headroom under beams, pipes and door frames along the route.
On the WSR 100/16 100/25/ 100/30, note any slope, threshold or step along the working route.
On the WSR 100/16 100/25/ 100/30, attachments are secured before the machine leaves the station.
Unusual noise or movement is reported before further use.
On the WSR 100/16 100/25/ 100/30, battery or fuel levels are checked at the start of each shift.
Loads are kept low while travelling between stations.
On the WSR 100/16 100/25/ 100/30, attachments such as clamps or rotators are matched to the load shape.
Spare parts for wear items follow the parts manual after delivery.
On the WSR 100/16 100/25/ 100/30, the receiving side pairs it with a dock ramp or platform where needed.
Related models in the same group are listed on the family page.
On the WSR 100/16 100/25/ 100/30, the signed datasheet issued with the quotation is the binding version.
Dimensions are checked against the source record before quoting.
On the WSR 100/16 100/25/ 100/30, site conditions such as gradient, dust and moisture belong in the enquiry.
Any option not listed should be confirmed in writing before order.
On the WSR 100/16 100/25/ 100/30, the operation and parts material travel with the machine.
Mixed equipment can be listed on one enquiry.
On the WSR 100/16 100/25/ 100/30, the booking reference is issued with the proforma invoice.
Quote the serial number and component name when ordering spares.
The operation material covers controls, checks and routine service points.
The parts manual lists the wear items and their reference views.
The serial number identifies the build when parts are ordered later.
Questions
The listed rated capacity is 1000 kg at the standard load centre. Above the rated lift height capacity derates along the mast curve.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.