CTY-EW Hand Stacker, rated capacity 1000, 24, lift height 1600. Walk-behind and stand-on stackers put loads straight onto racking.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | CTY-EW(1400) |
| Capacity | 1000 |
| Max.lifting height | 1600 |
| Lowered height of forks | 90 |
| Fork length | 900 |
| Adjustable Width of fork | 300-120 |
| Lifting speed | 20 |
| lowering speed | Controllable |
| Operation power of crank | 24 |
| Outer width of front legs | 1400 |
| Front wheel size | φ75x70 |
| Rear wheel size | φ180x50 |
| Overall size | 2080x1400x1470 |
| Self Weight | 210 |
Gallery
All detail images published for this model.

CTY-EW Hand Stacker, part of the Stackers and order pickers line.
Walk-behind, ride-on and semi-electric stackers plus order picking platform trucks.
Pallet stacking to racking
Published figures for this build: rated capacity 1000 kg, lift height 1600.
Stackers keep the pallet close to the legs while lifting at height.
The walk-behind model leaves the operator free to guide each load.
Straddle legs carry the mast forward for a much narrower aisle.
Walk-behind and stand-on stackers put loads straight onto racking.
Confirm the aisle width against the pallet depth before choosing a chassis. Confirm the charger voltage or fuel type for your destination country.
The specification sheet records Model: CTY-EW(1400); Capacity (kg): 1000; Max.lifting height (mm): 1600; Lowered height of forks (mm): 90; Fork length (mm): 900; Adjustable Width of fork (mm): 300-120.
The specification sheet records Lifting speed (mm/stroke): 20; lowering speed (mm/stroke): Controllable; Operation power of crank (kg): 24; Outer width of front legs (mm): 1400; Front wheel size (mm): φ75x70; Rear wheel size (mm): φ180x50.
The specification sheet records Overall size (mm): 2080x1400x1470; Self Weight (kg): 210.
Units are copied as published; convert them only when comparing models.
Each row in the table keeps the label and value from the source record.
Rated figures apply at the standard load centre unless a row says otherwise.
Those missing values can be requested directly through the enquiry form.
Configuration follows the load, working height and site layout.
The enquiry should list any attachment the job requires.
Measure the pallet footprint before the chassis is shortlisted.
Match the power arrangement to the shifts and the working environment.
Compare the lowered height against the lowest door on the route.
List the models that clear each constraint before asking for a quote.
Compare capacity first, then the lift height the job actually needs.
On the CTY-EW, list the attachments required, such as clamps, sideshift or rotator.
Describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
On the CTY-EW, send photographs of the racking and the existing working area when possible.
Mark the stations where loads are picked up and dropped off each shift.
On the CTY-EW, keep the charging or refuelling position clear of the main traffic aisle.
On the CTY-EW, attachments are secured before the machine leaves the station.
The operator checks load stability before each lift or move.
On the CTY-EW, routine checks cover tyres, brakes, controls and visible leaks.
Battery or fuel levels are checked at the start of each shift.
On the CTY-EW, this machine usually works alongside pallet trucks and stacking equipment.
Storage cages and racking organise the loads it moves between stations.
On the CTY-EW, the receiving side pairs it with a dock ramp or platform where needed.
The layout drawing shows where each machine sits in the operation.
On the CTY-EW, capacity above the rated lift height follows the mast curve.
The specification sheet is the binding reference for listed values.
On the CTY-EW, the signed datasheet issued with the quotation is the binding version.
Attachments are quoted separately once the base chassis is fixed.
On the CTY-EW, the booking reference is issued with the proforma invoice.
Quote the serial number and component name when ordering spares.
On the CTY-EW, mixed equipment can be listed on one enquiry.
Documents issued for an order are listed in the quotation.
Ask for the specific certificate required for your target country.
The operation material covers controls, checks and routine service points.
The parts manual lists the wear items and their reference views.
Questions
The listed rated capacity is 1000 at the standard load centre. Above the rated lift height capacity derates along the mast curve.
The specification sheet lists 1600 for this build. Send the rack beam and door heights together to size the mast.
The listed power arrangement is 24. Confirm the supply voltage or fuel type for your site before ordering.
The listed service or net weight is 210. This matters for floor loading, ramps and container plans.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.