AAC Cement board vacuum lifter AAC Cement board vacuum lifter, rated capacity 500, lift height 3000. Vacuum lifters grip smooth sheets by suction pad, without hooks or slings.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | WSC-50/30-GR |
| Capacity | 500 |
| Lifting height | 3000 |
| Tilt | 0-90 |
| Drive motor | AC16/1500 |
| Lifting motor | DC24/2000 |
| Vacuum Pump | DC24/1500 |
| Battery | 24/210 |
| Battery charger | 24/30 |
| Drive wheel size | 300*125 |
| Front wheel size | 300*125 |
| Suction cup size | 400*200 |
| No. of Suction cups | 8 |
| Max size of panel | 5800*600 |
| Overall size (ex frame) | 1735*1020*2050 |
Gallery
All detail images published for this model.








AAC Cement board vacuum lifter AAC Cement board vacuum lifter, part of the Vacuum lifters line.
Vacuum suction lifters and frames for glass, stone, metal sheet and panel installation.
Board and panel placement
Published figures for this build: rated capacity 500 kgs, lift height 3000.
The lifter pairs with a crane, forklift attachment or its own battery frame.
Rotation and tilting let one operator place a panel into a rack.
Glass, stone, metal sheet and plasterboard are handled with pad frames.
Pads are matched to the sheet surface and the load weight.
Check closed mast or chassis height against the lowest door on the route. Note cold store, outdoor gradient or container entry as a constraint.
The specification sheet records Model: WSC-50/30-GR; Capacity (kgs): 500; Lifting height (mm): 3000; Tilt (degree): 0-90; Drive motor (V/W): AC16/1500; Lifting motor (V/W): DC24/2000.
The specification sheet records Vacuum Pump (V/W): DC24/1500; Battery (V/Ah): 24/210; Battery charger (V/Ah): 24/30; Drive wheel size (mm): 300*125; Front wheel size (mm): 300*125; Suction cup size (mm): 400*200.
The specification sheet records No. of Suction cups: 8; Max size of panel (mm): 5800*600; Overall size (ex frame) (mm): 1735*1020*2050.
Those missing values can be requested directly through the enquiry form.
Units are copied as published; convert them only when comparing models.
Options and attachments are listed separately from the base chassis.
An em dash marks a value the source record did not publish.
Configuration follows the load, working height and site layout.
Send pallet size, door height and aisle width with the enquiry.
The listed figures follow the record; options are confirmed on the quotation.
Match the power arrangement to the shifts and the working environment.
Compare capacity first, then the lift height the job actually needs.
List the models that clear each constraint before asking for a quote.
Compare the lowered height against the lowest door on the route.
On the AAC Cement board vacuum lifter, mark the stations where loads are picked up and dropped off each shift.
List the attachments required, such as clamps, sideshift or rotator.
On the AAC Cement board vacuum lifter, note any slope, threshold or step along the working route.
Check the lowest door, beam height and aisle the truck has to pass through.
On the AAC Cement board vacuum lifter, describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
On the AAC Cement board vacuum lifter, the operator checks load stability before each lift or move.
Attachments are secured before the machine leaves the station.
On the AAC Cement board vacuum lifter, the working area is kept clear of loose packaging and obstacles.
Loads are kept low while travelling between stations.
On the AAC Cement board vacuum lifter, related models in the same group are listed on the family page.
The layout drawing shows where each machine sits in the operation.
On the AAC Cement board vacuum lifter, spare parts for wear items follow the parts manual after delivery.
A mixed enquiry can list this model together with other families.
On the AAC Cement board vacuum lifter, dimensions are checked against the source record before quoting.
Capacity above the rated lift height follows the mast curve.
On the AAC Cement board vacuum lifter, the specification sheet is the binding reference for listed values.
Attachments are quoted separately once the base chassis is fixed.
On the AAC Cement board vacuum lifter, wear parts are supplied after delivery against the parts manual.
Mixed equipment can be listed on one enquiry.
On the AAC Cement board vacuum lifter, the operation and parts material travel with the machine.
The enquiry should include the quantity and destination port.
The operation material covers controls, checks and routine service points.
Ask for the specific certificate required for your target country.
The parts manual lists the wear items and their reference views.
Questions
The listed rated capacity is 500 at the standard load centre. Above the rated lift height capacity derates along the mast curve.
The specification sheet lists 3000 for this build. Send the rack beam and door heights together to size the mast.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Vacuum lifters related models
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.