800kgs Vacuum lifter 800kgs Vacuum lifter, rated capacity 800 kg, lift height 5000. Glass, stone, metal sheet and plasterboard are handled with pad frames.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | WCR-GR-800 |
| Capacity | 800 |
| Manuel rotate | ° 360 |
| Lifting height | 5000 |
| Battery | 2*12/120 |
| Charger | 24/18 |
| Drive motor | V/W 24/1500 |
| Lifting motor | V/W 24/2200 |
| Width | 840 |
| Length | 2800 |
| Front Wheel size | 400*90 / 2 |
| Real wheel size | 300*100 |
| Suction cup | 300 / 8 |
Gallery
All detail images published for this model.





800kgs Vacuum lifter 800kgs Vacuum lifter, part of the Vacuum lifters line.
Vacuum suction lifters and frames for glass, stone, metal sheet and panel installation.
Panel feeding to machines
Published figures for this build: rated capacity 800 kg, lift height 5000.
The lifter pairs with a crane, forklift attachment or its own battery frame.
Glass, stone, metal sheet and plasterboard are handled with pad frames.
Vacuum lifters grip smooth sheets by suction pad, without hooks or slings.
Seal condition is checked before each lift on a smooth surface.
Confirm the charger voltage or fuel type for your destination country. State any attachment required alongside the base model.
The specification sheet records Model: WCR-GR-800; Capacity (kg): 800; Manuel rotate: ° 360; Lifting height (mm): 5000; Battery (v/a): 2*12/120; Charger (v/a): 24/18.
The specification sheet records Drive motor: V/W 24/1500; Lifting motor: V/W 24/2200; Width (mm): 840; Length (mm): 2800; Front Wheel size (mm): 400*90 / 2; Real wheel size (mm): 300*100.
The specification sheet records Suction cup (mm): 300 / 8.
Each row in the table keeps the label and value from the source record.
Rated figures apply at the standard load centre unless a row says otherwise.
Units are copied as published; convert them only when comparing models.
Options and attachments are listed separately from the base chassis.
Configuration follows the load, working height and site layout.
Dimensions in the table come from the source record.
Send pallet size, door height and aisle width with the enquiry.
Review the tyre type against the surface the machine will run on.
Match the power arrangement to the shifts and the working environment.
List the models that clear each constraint before asking for a quote.
Note any attachment that changes the load centre or the overall width.
On the 800kgs Vacuum lifter, list the attachments required, such as clamps, sideshift or rotator.
Check the lowest door, beam height and aisle the truck has to pass through.
On the 800kgs Vacuum lifter, describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
Measure the pallet footprint and the heaviest single load before comparing models.
On the 800kgs Vacuum lifter, check headroom under beams, pipes and door frames along the route.
On the 800kgs Vacuum lifter, routine checks cover tyres, brakes, controls and visible leaks.
The working area is kept clear of loose packaging and obstacles.
On the 800kgs Vacuum lifter, loads are kept low while travelling between stations.
Unusual noise or movement is reported before further use.
On the 800kgs Vacuum lifter, spare parts for wear items follow the parts manual after delivery.
Attachments such as clamps or rotators are matched to the load shape.
On the 800kgs Vacuum lifter, a mixed enquiry can list this model together with other families.
Related models in the same group are listed on the family page.
On the 800kgs Vacuum lifter, tyre choice should match the floor rather than the price list.
Site conditions such as gradient, dust and moisture belong in the enquiry.
On the 800kgs Vacuum lifter, the specification sheet is the binding reference for listed values.
The signed datasheet issued with the quotation is the binding version.
On the 800kgs Vacuum lifter, loading is recorded before the container is sealed.
Packing follows sea-freight practice for the chosen chassis.
On the 800kgs Vacuum lifter, wear parts are supplied after delivery against the parts manual.
Quote the serial number and component name when ordering spares.
The parts manual lists the wear items and their reference views.
The operation material covers controls, checks and routine service points.
Ask for the specific certificate required for your target country.
Questions
The listed rated capacity is 800 kg at the standard load centre. Above the rated lift height capacity derates along the mast curve.
The specification sheet lists 5000 for this build. Send the rack beam and door heights together to size the mast.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Vacuum lifters related models
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.