600kgs front wheel drive vacuum lifter 600kgs front wheel drive vacuum lifter, rated capacity 600 kg, lift height 3500. Glass, stone, metal sheet and plasterboard are handled with pad frames.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | WCR-GR-600F |
| Capacity | 600 |
| Manuel rotate | ° 360 |
| Lifting height | 3500 |
| Battery | 2*12/120 |
| Charger | 24/18 |
| Drive motor | V/W 24/1500 |
| Lifting motor | V/W 24/2200 |
| Width | 1350 |
| Length | 2600 |
| Front Wheel size | 466*195/4 |
| Real wheel size | 400*100/2 |
| Suction cup | 300/6 |
Gallery
All detail images published for this model.





600kgs front wheel drive vacuum lifter 600kgs front wheel drive vacuum lifter, part of the Vacuum lifters line.
Vacuum suction lifters and frames for glass, stone, metal sheet and panel installation.
Metal sheet lifting
Published figures for this build: rated capacity 600 kg, lift height 3500.
Seal condition is checked before each lift on a smooth surface.
Rotation and tilting let one operator place a panel into a rack.
Glass, stone, metal sheet and plasterboard are handled with pad frames.
Vacuum lifters grip smooth sheets by suction pad, without hooks or slings.
Match the tyre type to the floor surface rather than the price list. Describe the shifts per day when the power arrangement is selected.
The specification sheet records Model: WCR-GR-600F; Capacity (kg): 600; Manuel rotate: ° 360; Lifting height (mm): 3500; Battery (v/a): 2*12/120; Charger (v/a): 24/18.
The specification sheet records Drive motor: V/W 24/1500; Lifting motor: V/W 24/2200; Width (mm): 1350; Length (mm): 2600; Front Wheel size (mm): 466*195/4; Real wheel size (mm): 400*100/2.
The specification sheet records Suction cup (mm): 300/6.
Each row in the table keeps the label and value from the source record.
Units are copied as published; convert them only when comparing models.
An em dash marks a value the source record did not publish.
Options and attachments are listed separately from the base chassis.
Configuration follows the load, working height and site layout.
Door and beam heights decide which mast will clear the route.
The listed figures follow the record; options are confirmed on the quotation.
Compare capacity first, then the lift height the job actually needs.
Review the tyre type against the surface the machine will run on.
Check the chassis width against the aisle and the container door.
Compare the lowered height against the lowest door on the route.
On the 600kgs front wheel drive vacuum lifter, note any slope, threshold or step along the working route.
State the shifts per day so the power arrangement can be sized properly.
On the 600kgs front wheel drive vacuum lifter, describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
Keep the charging or refuelling position clear of the main traffic aisle.
On the 600kgs front wheel drive vacuum lifter, check the lowest door, beam height and aisle the truck has to pass through.
On the 600kgs front wheel drive vacuum lifter, loads are kept low while travelling between stations.
Battery or fuel levels are checked at the start of each shift.
On the 600kgs front wheel drive vacuum lifter, the operator checks load stability before each lift or move.
Routine checks cover tyres, brakes, controls and visible leaks.
On the 600kgs front wheel drive vacuum lifter, related models in the same group are listed on the family page.
Storage cages and racking organise the loads it moves between stations.
On the 600kgs front wheel drive vacuum lifter, the receiving side pairs it with a dock ramp or platform where needed.
This machine usually works alongside pallet trucks and stacking equipment.
On the 600kgs front wheel drive vacuum lifter, the specification sheet is the binding reference for listed values.
The signed datasheet issued with the quotation is the binding version.
On the 600kgs front wheel drive vacuum lifter, capacity above the rated lift height follows the mast curve.
Dimensions are checked against the source record before quoting.
On the 600kgs front wheel drive vacuum lifter, documents issued for an order are listed in the quotation.
The operation and parts material travel with the machine.
On the 600kgs front wheel drive vacuum lifter, quotations follow the model, listed specification and destination port.
Wear parts are supplied after delivery against the parts manual.
Test and conformity documents follow the model and destination market.
Ask for the specific certificate required for your target country.
The parts manual lists the wear items and their reference views.
Questions
The listed rated capacity is 600 kg at the standard load centre. Above the rated lift height capacity derates along the mast curve.
The specification sheet lists 3500 for this build. Send the rack beam and door heights together to size the mast.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Vacuum lifters related models
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.