Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

Whole-electromotion aerial order picker FSEP-YZ hydraulic steering — stacker

Whole-electromotion aerial order picker FSEP-YZ hydraulic steering Whole-electromotion aerial order picker FSEP-YZ hydraulic steering, rated capacity 300 kg. Walk-behind and stand-on stackers put loads straight onto racking.

Whole-electromotion aerial order picker FSEP-YZ hydraulic steering stacker — product photo 1 of 2

Ordering facts for the Whole-electromotion aerial order picker FSEP-YZ hydraulic steering

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

Whole-electromotion aerial order picker FSEP-YZ hydraulic steering specification

Values are copied from the source record in their original order and units.

Whole-electromotion aerial order picker FSEP-YZ hydraulic steering specification table
ParameterUnitFSEP3-2.7-YZFSEP3-3.0-YZFSEP3-4.5-YZFSEP3-4.5-YZ
Model—FSEP3-2.7-YZFSEP3-3.0-YZFSEP3-4.5-YZFSEP3-4.5-YZ
Max. Platform HeightH2700300040004500
Max. Machine HeightH14000445050006000
Ground ClearanceH245454545
Lift Rated Capacitykg300300300300
Platform Sizemm600x700600x700600x700600x700
Max. Drive Speedplatform Stowed4444
Max. Drive Speedplatform Elevated1.61.61.61.6
Min.turning Radiusmm1600160016901690
Max. Climbing Capacity%15~2015~2015~2015~20
Driving Wheel SizemmΦ230x80Φ230x80Φ230x80Φ230x80
Caster SizemmΦ230x80Φ230x80Φ230x80Φ230x80
Driving Motorv/kw2x24/0.4 2x24/0.4 2x24/0.4 2x24/0.4
Lifting Motorv/kw24/1.6 24/1.6 24/1.6 24/1.6
Aneroid Batteryv/ah2x12/100 2x12/100 2x12/100 2x12/100
Chargerv/a24/15 24/15 24/15 24/15
Overall LengthA1540154016201620
Overall WidthB760760760760
Overall HeightC1900205019202080
Overall Net Weightkg600620830850
Request price Datasheet (print / save as PDF) Ask about voltage

Gallery

Product photographs

All detail images published for this model.

What this model is built to do

Whole-electromotion aerial order picker FSEP-YZ hydraulic steering Whole-electromotion aerial order picker FSEP-YZ hydraulic steering, part of the Stackers and order pickers line.

Walk-behind, ride-on and semi-electric stackers plus order picking platform trucks.

Aisle stacking duties

Published figures for this build: rated capacity 300 300 300 300 kg, overall width 760 760 760 760 B, turning radius 1600 1600 1690 1690 mm.

The walk-behind model leaves the operator free to guide each load.

Stackers keep the pallet close to the legs while lifting at height.

The walk-behind model leaves the operator free to guide each load.

Stackers keep the pallet close to the legs while lifting at height.

Compare rated capacity against the heaviest single load you move. Confirm the aisle width against the pallet depth before choosing a chassis.

Specification walk-through

The specification sheet records Model: FSEP3-2.7-YZ / FSEP3-3.0-YZ / FSEP3-4.5-YZ / FSEP3-4.5-YZ; Max. Platform Height (H): 2700 / 3000 / 4000 / 4500; Max. Machine Height (H1): 4000 / 4450 / 5000 / 6000; Ground Clearance (H2): 45 / 45 / 45 / 45; Lift Rated Capacity (kg): 300 / 300 / 300 / 300; Platform Size (mm): 600x700 / 600x700 / 600x700 / 600x700.

The specification sheet records Max. Drive Speed (platform Stowed): 4 / 4 / 4 / 4; Max. Drive Speed (platform Elevated): 1.6 / 1.6 / 1.6 / 1.6; Min.turning Radius (mm): 1600 / 1600 / 1690 / 1690; Max. Climbing Capacity (%): 15~20 / 15~20 / 15~20 / 15~20; Driving Wheel Size (mm): Φ230x80 / Φ230x80 / Φ230x80 / Φ230x80; Caster Size (mm): Φ230x80 / Φ230x80 / Φ230x80 / Φ230x80.

The specification sheet records Driving Motor (v/kw): 2x24/0.4 2x24/0.4 2x24/0.4 2x24/0.4; Lifting Motor (v/kw): 24/1.6 24/1.6 24/1.6 24/1.6; Aneroid Battery (v/ah): 2x12/100 2x12/100 2x12/100 2x12/100; Charger (v/a): 24/15 24/15 24/15 24/15; Overall Length (A): 1540 / 1540 / 1620 / 1620; Overall Width (B): 760 / 760 / 760 / 760.

The specification sheet records Overall Height (C): 1900 / 2050 / 1920 / 2080; Overall Net Weight (kg): 600 / 620 / 830 / 850.

Units are copied as published; convert them only when comparing models.

Each row in the table keeps the label and value from the source record.

An em dash marks a value the source record did not publish.

Options and attachments are listed separately from the base chassis.

How to specify the right build

Configuration follows the load, working height and site layout.

Measure the pallet footprint before the chassis is shortlisted.

Send pallet size, door height and aisle width with the enquiry.

Check the machine weight against floor loading where the site is raised.

Note any attachment that changes the load centre or the overall width.

Check the chassis width against the aisle and the container door.

Compare capacity first, then the lift height the job actually needs.

  • List the load per move, lift height and floor surface before comparing models.
  • State the shifts per day so the power arrangement can be sized properly.
  • Send those figures with the model code; the reply confirms whether the chassis suits.

Site preparation and operating notes

On the Whole-electromotion aerial order picker FSEP-YZ hydraulic steering, state the shifts per day so the power arrangement can be sized properly.

List the attachments required, such as clamps, sideshift or rotator.

On the Whole-electromotion aerial order picker FSEP-YZ hydraulic steering, check headroom under beams, pipes and door frames along the route.

Note any slope, threshold or step along the working route.

On the Whole-electromotion aerial order picker FSEP-YZ hydraulic steering, describe the floor surface: sealed concrete, asphalt, gravel or packed earth.

Operation and routine checks

On the Whole-electromotion aerial order picker FSEP-YZ hydraulic steering, battery or fuel levels are checked at the start of each shift.

Unusual noise or movement is reported before further use.

On the Whole-electromotion aerial order picker FSEP-YZ hydraulic steering, loads are kept low while travelling between stations.

Routine checks cover tyres, brakes, controls and visible leaks.

How this model fits the operation

On the Whole-electromotion aerial order picker FSEP-YZ hydraulic steering, the receiving side pairs it with a dock ramp or platform where needed.

Storage cages and racking organise the loads it moves between stations.

On the Whole-electromotion aerial order picker FSEP-YZ hydraulic steering, this machine usually works alongside pallet trucks and stacking equipment.

Related models in the same group are listed on the family page.

Working conditions and honest limits

On the Whole-electromotion aerial order picker FSEP-YZ hydraulic steering, the specification sheet is the binding reference for listed values.

Attachments are quoted separately once the base chassis is fixed.

On the Whole-electromotion aerial order picker FSEP-YZ hydraulic steering, the signed datasheet issued with the quotation is the binding version.

Capacity above the rated lift height follows the mast curve.

Delivery, documents and support

On the Whole-electromotion aerial order picker FSEP-YZ hydraulic steering, the booking reference is issued with the proforma invoice.

Wear parts are supplied after delivery against the parts manual.

On the Whole-electromotion aerial order picker FSEP-YZ hydraulic steering, the operation and parts material travel with the machine.

Quote the serial number and component name when ordering spares.

The parts manual lists the wear items and their reference views.

Test and conformity documents follow the model and destination market.

The operation material covers controls, checks and routine service points.

Before you order

  • Compare the published capacity against the heaviest single move before the mast or attachment is chosen.
  • Dimensions in the specification come from the source record — check them against the container door, the lowest door on the route and the aisle before ordering.
  • Any clamp, sideshift or rotator changes the load centre and must be listed alongside the base model.
  • Documents issued with the order: ISO 9001, ISO 14001 and ISO 18001 factory certificates, plus CE or GS where the model carries it, and the serial list for the shipment.
  • The parts manual ships with the machine; identify wear items by serial number and part name when reordering.

Questions

Questions buyers ask before ordering

What load does the Whole-electromotion aerial order picker FSEP-YZ hydraulic steering carry?+

The listed rated capacity is 300 kg at the standard load centre. Above the rated lift height capacity derates along the mast curve.

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

What does the price depend on?+

Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.

What is the minimum order quantity?+

The minimum order quantity is one set, and mixed models can be combined in one container.

How is payment arranged?+

Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Stackers and order pickers related models

ModelCapacityLiftPowerTypical use
PWSR500 kg——Narrow-aisle put-away
WSR1000 kg——Walk-behind pallet lifting
CTY-A—1600—Low-level pallet stacking
CTY-D—1600—Narrow-aisle put-away
CTY-E—1600—Walk-behind pallet lifting

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.