Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

Whole-electricomotion aerical order picker FSEP3 — stacker

Whole-electricomotion aerical order picker FSEP3 Whole-electricomotion aerical order picker FSEP3. Stackers keep the pallet close to the legs while lifting at height.

Whole-electricomotion aerical order picker FSEP3 stacker — product photo 1 of 2

Ordering facts for the Whole-electricomotion aerical order picker FSEP3

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

Whole-electricomotion aerical order picker FSEP3 specification

Values are copied from the source record in their original order and units.

Whole-electricomotion aerical order picker FSEP3 specification table
ParameterValue
Model NumberFSEP3-2.7 FSEP3-3.3 PSEP3-4.0 FSEP3-4.5
Platform height2700 3300 4000 4500
Machine height4020 4900 5310 6000
Distance from the base to the ground40 40 40 40
Platform load rating300 300 300 300
Work platform size600X700 600X700 600X700 600X700
Maximum driving speed4 4 4 4
Maximum driving speed1.6 1.6 1.6 1.6
Minimum turning diameter1600 1600 1600 1600
Maximum climbing ability15-20 15-20 15-20 15-20
Drive wheel sizeφ230X80 φ230X80 φ230X80 φ230X80
Universal wheel sizein 6 6 6 6
motor2X24/0.4 2X24/0.4 2X24/0.4 2X24/0.4
Lifting motor2x12/1.6 2x12/1.6 2x12/1.6 2x12/1.6
Maintenance-free batteryv/Aw 2X12/100 2X12/100 2X12/100 2X12/100
charger24/15 24/15 24/15 24/15
Overall length1530 1530 1620 1620
Overall width760 760 760 760
Overall height1830 2130 1840 2000
Total Weight430 450 660 680
Request price Datasheet (print / save as PDF) Ask about voltage

Gallery

Product photographs

All detail images published for this model.

What this model is built to do

Whole-electricomotion aerical order picker FSEP3 Whole-electricomotion aerical order picker FSEP3, part of the Stackers and order pickers line.

Walk-behind, ride-on and semi-electric stackers plus order picking platform trucks.

Walk-behind pallet lifting

Published figures for this build: overall width 760 760 760 760 B.

Walk-behind and stand-on stackers put loads straight onto racking.

Walk-behind and stand-on stackers put loads straight onto racking.

Stackers work in narrow aisles where a counterbalance truck will not turn.

Walk-behind and stand-on stackers put loads straight onto racking.

Match the tyre type to the floor surface rather than the price list. State any attachment required alongside the base model.

Specification walk-through

The specification sheet records Model Number: FSEP3-2.7 FSEP3-3.3 PSEP3-4.0 FSEP3-4.5; Platform height (H): 2700 3300 4000 4500; Machine height (H1): 4020 4900 5310 6000; Distance from the base to the ground (H2): 40 40 40 40; Platform load rating (kg): 300 300 300 300; Work platform size (1xn): 600X700 600X700 600X700 600X700.

The specification sheet records Maximum driving speed (platform lowered): 4 4 4 4; Maximum driving speed (platform raised): 1.6 1.6 1.6 1.6; Minimum turning diameter (mm): 1600 1600 1600 1600; Maximum climbing ability (%): 15-20 15-20 15-20 15-20; Drive wheel size (mm): φ230X80 φ230X80 φ230X80 φ230X80; Universal wheel size: in 6 6 6 6.

The specification sheet records motor (v/kw): 2X24/0.4 2X24/0.4 2X24/0.4 2X24/0.4; Lifting motor (v/kw): 2x12/1.6 2x12/1.6 2x12/1.6 2x12/1.6; Maintenance-free battery: v/Aw 2X12/100 2X12/100 2X12/100 2X12/100; charger (v/a): 24/15 24/15 24/15 24/15; Overall length (A): 1530 1530 1620 1620; Overall width (B): 760 760 760 760.

The specification sheet records Overall height (C): 1830 2130 1840 2000; Total Weight (kg): 430 450 660 680.

Options and attachments are listed separately from the base chassis.

Those missing values can be requested directly through the enquiry form.

Each row in the table keeps the label and value from the source record.

Rated figures apply at the standard load centre unless a row says otherwise.

How to specify the right build

Configuration follows the load, working height and site layout.

Door and beam heights decide which mast will clear the route.

Measure the pallet footprint before the chassis is shortlisted.

Review the tyre type against the surface the machine will run on.

Check the chassis width against the aisle and the container door.

Note any attachment that changes the load centre or the overall width.

Compare the lowered height against the lowest door on the route.

  • State the shifts per day so the power arrangement can be sized properly.
  • List attachments such as clamps, sideshift or rotator separately.
  • Send those figures with the model code; the reply confirms whether the chassis suits.

Site preparation and operating notes

On the Whole-electricomotion aerical order picker FSEP3, describe the floor surface: sealed concrete, asphalt, gravel or packed earth.

Keep the charging or refuelling position clear of the main traffic aisle.

On the Whole-electricomotion aerical order picker FSEP3, check the lowest door, beam height and aisle the truck has to pass through.

Note any slope, threshold or step along the working route.

On the Whole-electricomotion aerical order picker FSEP3, send photographs of the racking and the existing working area when possible.

Operation and routine checks

On the Whole-electricomotion aerical order picker FSEP3, unusual noise or movement is reported before further use.

The operator checks load stability before each lift or move.

On the Whole-electricomotion aerical order picker FSEP3, loads are kept low while travelling between stations.

Attachments are secured before the machine leaves the station.

How this model fits the operation

On the Whole-electricomotion aerical order picker FSEP3, related models in the same group are listed on the family page.

Storage cages and racking organise the loads it moves between stations.

On the Whole-electricomotion aerical order picker FSEP3, attachments such as clamps or rotators are matched to the load shape.

Spare parts for wear items follow the parts manual after delivery.

Working conditions and honest limits

On the Whole-electricomotion aerical order picker FSEP3, dimensions are checked against the source record before quoting.

Attachments are quoted separately once the base chassis is fixed.

On the Whole-electricomotion aerical order picker FSEP3, tyre choice should match the floor rather than the price list.

The signed datasheet issued with the quotation is the binding version.

Delivery, documents and support

On the Whole-electricomotion aerical order picker FSEP3, mixed equipment can be listed on one enquiry.

Quote the serial number and component name when ordering spares.

On the Whole-electricomotion aerical order picker FSEP3, loading is recorded before the container is sealed.

Documents issued for an order are listed in the quotation.

Test and conformity documents follow the model and destination market.

The operation material covers controls, checks and routine service points.

The parts manual lists the wear items and their reference views.

Before you order

  • Compare the published capacity against the heaviest single move before the mast or attachment is chosen.
  • Check overall width and turning space against the aisle and any narrow doorway before the chassis is shortlisted.
  • Attachments are quoted separately once the base chassis is fixed, so the attachment weight can be counted against the residual capacity.
  • CE or GS documentation where applicable is listed in the quotation together with the factory quality certificates.
  • Wear parts are ordered after delivery against the parts manual, the serial number and the component name.

Questions

Questions buyers ask before ordering

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

What does the price depend on?+

Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.

What is the minimum order quantity?+

The minimum order quantity is one set, and mixed models can be combined in one container.

How is payment arranged?+

Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.

Which ports can the machine ship from?+

Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Stackers and order pickers related models

ModelCapacityLiftPowerTypical use
PWSR500 kg——Narrow-aisle put-away
WSR1000 kg——Walk-behind pallet lifting
CTY-A—1600—Low-level pallet stacking
CTY-D—1600—Narrow-aisle put-away
CTY-E—1600—Walk-behind pallet lifting

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.