Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

WFB15-30 / WFB15-60 — stacker

WFB15-30 / WFB15-60 Electric Stacker, rated capacity 1500. The walk-behind model leaves the operator free to guide each load.

WFB15-30 / WFB15-60 stacker — product photo 1 of 2

Ordering facts for the WFB15-30 / WFB15-60

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

WFB15-30 / WFB15-60 specification

Values are copied from the source record in their original order and units.

WFB15-30 / WFB15-60 specification table
ParameterValue
Description Model No.WFB15-30 / WFB15-60
Rated Capacity1500
Operate TypeStand-on
Max. Lifting Height3000 / 6000
Max Travel Speed km/h-laden/unladen7.5/8.5
Load center MM500
Fork Dimensions- L/W/T---mm1070*100*35
Lifting Speed (MM/S)-laden/unladen117/243
Side-travel Speed -km/h5
Overall Length2333 / 2393
Overall Width1514 / 1682
Height-Overhead guard--mm2320
Height---Mast Lowered2080 / 2679
Height-Mast Extended w/Load-Backrest -mm3885 / 6885
Height--Free Lift--mm100 / 2090
Tilt Angle----Upward/Downward--deg.3/5
Fork Spread Range220-662 / 247-780
Reach Stroke630 / 570
Min Ground Clearance--mm80
Wheel TypePolyurethane Solid Tyre
Driving WheelΦ343×108
Balance WheelΦ180×76
Front WheelΦ267×114
Battery V/AH-48V /300 AH / 48V/300 AH
Service BrakeElectromagnetic
Parking BrakeElectromagnetic
Charger-Intelligent48V /40 A / 48 V/40 A
Driving Motor5.5 (AC) / 5.5(AC)
Lifting Motor6.3
Request price Datasheet (print / save as PDF) Ask about voltage

Gallery

Product photographs

All detail images published for this model.

What this model is built to do

WFB15-30 / WFB15-60 Electric Stacker, part of the Stackers and order pickers line.

Walk-behind, ride-on and semi-electric stackers plus order picking platform trucks.

Narrow-aisle put-away

Published figures for this build: rated capacity 1500 KG, overall width 1514 / 1682.

Stackers keep the pallet close to the legs while lifting at height.

Straddle legs carry the mast forward for a much narrower aisle.

The walk-behind model leaves the operator free to guide each load.

Stackers keep the pallet close to the legs while lifting at height.

Note cold store, outdoor gradient or container entry as a constraint. Confirm the aisle width against the pallet depth before choosing a chassis.

Specification walk-through

The specification sheet records Description Model No.: WFB15-30 / WFB15-60; Rated Capacity (KG): 1500; Operate Type: Stand-on; Max. Lifting Height (MM): 3000 / 6000; Max Travel Speed km/h-laden/unladen: 7.5/8.5; Load center MM: 500.

The specification sheet records Fork Dimensions- L/W/T---mm: 1070*100*35; Lifting Speed (MM/S)-laden/unladen: 117/243; Side-travel Speed -km/h: 5; Overall Length (MM): 2333 / 2393; Overall Width (MM): 1514 / 1682; Height-Overhead guard--mm: 2320.

The specification sheet records Height---Mast Lowered (MM): 2080 / 2679; Height-Mast Extended w/Load-Backrest -mm: 3885 / 6885; Height--Free Lift--mm: 100 / 2090; Tilt Angle----Upward/Downward--deg.: 3/5; Fork Spread Range (MM): 220-662 / 247-780; Reach Stroke: 630 / 570.

The specification sheet records Min Ground Clearance--mm: 80; Wheel Type: Polyurethane Solid Tyre; Driving Wheel (MM): Φ343×108; Balance Wheel (MM): Φ180×76; Front Wheel (MM): Φ267×114; Battery V/AH- (ah): 48V /300 AH / 48V/300 AH.

The specification sheet records Service Brake: Electromagnetic; Parking Brake: Electromagnetic; Charger-Intelligent: 48V /40 A / 48 V/40 A; Driving Motor (KW): 5.5 (AC) / 5.5(AC); Lifting Motor (KW): 6.3.

Rated figures apply at the standard load centre unless a row says otherwise.

Each row in the table keeps the label and value from the source record.

Options and attachments are listed separately from the base chassis.

Units are copied as published; convert them only when comparing models.

How to specify the right build

Configuration follows the load, working height and site layout.

Door and beam heights decide which mast will clear the route.

The listed figures follow the record; options are confirmed on the quotation.

Compare the lowered height against the lowest door on the route.

Check the chassis width against the aisle and the container door.

Check the machine weight against floor loading where the site is raised.

Compare capacity first, then the lift height the job actually needs.

  • List attachments such as clamps, sideshift or rotator separately.
  • Note any constraint: low door, narrow aisle, cold store, outdoor gradient or entry.
  • Mark the stations where loads are picked up and dropped off each shift.

Site preparation and operating notes

On the WFB15-30 / WFB15-60, note any slope, threshold or step along the working route.

Mark the stations where loads are picked up and dropped off each shift.

On the WFB15-30 / WFB15-60, state the shifts per day so the power arrangement can be sized properly.

Check the lowest door, beam height and aisle the truck has to pass through.

On the WFB15-30 / WFB15-60, describe the floor surface: sealed concrete, asphalt, gravel or packed earth.

Operation and routine checks

On the WFB15-30 / WFB15-60, unusual noise or movement is reported before further use.

The operator follows the rated capacity marked on the chassis.

On the WFB15-30 / WFB15-60, battery or fuel levels are checked at the start of each shift.

Loads are kept low while travelling between stations.

How this model fits the operation

On the WFB15-30 / WFB15-60, spare parts for wear items follow the parts manual after delivery.

Attachments such as clamps or rotators are matched to the load shape.

On the WFB15-30 / WFB15-60, storage cages and racking organise the loads it moves between stations.

The receiving side pairs it with a dock ramp or platform where needed.

Working conditions and honest limits

On the WFB15-30 / WFB15-60, any option not listed should be confirmed in writing before order.

Capacity above the rated lift height follows the mast curve.

On the WFB15-30 / WFB15-60, dimensions are checked against the source record before quoting.

Site conditions such as gradient, dust and moisture belong in the enquiry.

Delivery, documents and support

On the WFB15-30 / WFB15-60, quotations follow the model, listed specification and destination port.

The enquiry should include the quantity and destination port.

On the WFB15-30 / WFB15-60, mixed equipment can be listed on one enquiry.

Quote the serial number and component name when ordering spares.

Test and conformity documents follow the model and destination market.

The operation material covers controls, checks and routine service points.

The serial number identifies the build when parts are ordered later.

Before you order

  • Compare the published capacity against the heaviest single move before the mast or attachment is chosen.
  • Dimensions in the specification come from the source record — check them against the container door, the lowest door on the route and the aisle before ordering.
  • Attachments are quoted separately once the base chassis is fixed, so the attachment weight can be counted against the residual capacity.
  • CE or GS documentation where applicable is listed in the quotation together with the factory quality certificates.
  • Wear parts are ordered after delivery against the parts manual, the serial number and the component name.

Questions

Questions buyers ask before ordering

What load does the WFB15-30 / WFB15-60 carry?+

The listed rated capacity is 1500 at the standard load centre. Above the rated lift height capacity derates along the mast curve.

What load centre applies to the rating?+

The specification lists a load centre of 500. Loads carried farther forward reduce rated capacity.

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

What does the price depend on?+

Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.

What is the minimum order quantity?+

The minimum order quantity is one set, and mixed models can be combined in one container.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Stackers and order pickers related models

ModelCapacityLiftPowerTypical use
PWSR500 kg——Narrow-aisle put-away
WSR1000 kg——Walk-behind pallet lifting
CTY-A—1600—Low-level pallet stacking
CTY-D—1600—Narrow-aisle put-away
CTY-E—1600—Walk-behind pallet lifting

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.