steel / plastic skate wheel Conveyor, rated capacity 300 kg/m. Belt width and length follow the package size and station layout.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Models | steel / plastic skate wheel |
| Length | 2000-4800mm (6.6'-15.7') / 2500-6000mm (8.2'-20') |
| Width | 400mm/500mm/600mm/700mm/18"/24"/30" |
| Height | 620-990mm (24.4"-39") / 710mm-1120mm (28"-44") |
| Load capacity | 300 |
| wheel | Dia. 48mm steel/plastic skate wheel with precision bearing |
Gallery
All detail images published for this model.





steel / plastic skate wheel Conveyor, part of the Conveyors line.
Roller, skate-wheel and telescopic conveyors for carton and bag flow into and out of containers.
Truck loading station feed
Published figures for this build: rated capacity 300 kg/m.
Flexible and powered belts cut walking distance inside a warehouse.
They pair with pallet trucks and stackers at the feed and discharge ends.
Conveyors move cartons, bags and loose packages along a set path.
Conveyors move cartons, bags and loose packages along a set path.
Confirm the charger voltage or fuel type for your destination country. Note cold store, outdoor gradient or container entry as a constraint.
The specification sheet records Models: steel / plastic skate wheel; Length: 2000-4800mm (6.6'-15.7') / 2500-6000mm (8.2'-20'); Width: 400mm/500mm/600mm/700mm/18"/24"/30"; Height: 620-990mm (24.4"-39") / 710mm-1120mm (28"-44"); Load capacity (kg/m): 300; wheel: Dia. 48mm steel/plastic skate wheel with precision bearing.
Remaining parameters are listed row by row in the specification table.
Those missing values can be requested directly through the enquiry form.
Options and attachments are listed separately from the base chassis.
Each row in the table keeps the label and value from the source record.
Rated figures apply at the standard load centre unless a row says otherwise.
Configuration follows the load, working height and site layout.
Door and beam heights decide which mast will clear the route.
The listed figures follow the record; options are confirmed on the quotation.
Compare the lowered height against the lowest door on the route.
Check the chassis width against the aisle and the container door.
Check the machine weight against floor loading where the site is raised.
Note any attachment that changes the load centre or the overall width.
On the steel / plastic skate wheel, check headroom under beams, pipes and door frames along the route.
Check the lowest door, beam height and aisle the truck has to pass through.
On the steel / plastic skate wheel, mark the stations where loads are picked up and dropped off each shift.
Send photographs of the racking and the existing working area when possible.
On the steel / plastic skate wheel, measure the pallet footprint and the heaviest single load before comparing models.
On the steel / plastic skate wheel, unusual noise or movement is reported before further use.
The working area is kept clear of loose packaging and obstacles.
On the steel / plastic skate wheel, battery or fuel levels are checked at the start of each shift.
Loads are kept low while travelling between stations.
On the steel / plastic skate wheel, the receiving side pairs it with a dock ramp or platform where needed.
This machine usually works alongside pallet trucks and stacking equipment.
On the steel / plastic skate wheel, attachments such as clamps or rotators are matched to the load shape.
Related models in the same group are listed on the family page.
On the steel / plastic skate wheel, dimensions are checked against the source record before quoting.
Site conditions such as gradient, dust and moisture belong in the enquiry.
On the steel / plastic skate wheel, tyre choice should match the floor rather than the price list.
The specification sheet is the binding reference for listed values.
On the steel / plastic skate wheel, quote the serial number and component name when ordering spares.
Loading is recorded before the container is sealed.
On the steel / plastic skate wheel, documents issued for an order are listed in the quotation.
The enquiry should include the quantity and destination port.
Test and conformity documents follow the model and destination market.
The operation material covers controls, checks and routine service points.
The serial number identifies the build when parts are ordered later.
Questions
The listed rated capacity is 300 kg/m at the standard load centre. Above the rated lift height capacity derates along the mast curve.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Conveyors related models
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.