Single-Roller Conveyor Conveyor. They pair with pallet trucks and stackers at the feed and discharge ends.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Roller diameter | 38mm or 50mm (single-row galvanized rollers, special bearing) |
| Conveying surface width | 450 / 500 / 600 |
| Expansion ratio | 3:1 |
Gallery
All detail images published for this model.







Single-Roller Conveyor Conveyor, part of the Conveyors line.
Roller, skate-wheel and telescopic conveyors for carton and bag flow into and out of containers.
Roller carton flow
Loading and unloading stations run steadier once the path is on a belt.
Flexible sections fold away when the transport run is not in use.
Flexible sections fold away when the transport run is not in use.
Belt width and length follow the package size and station layout.
Match the tyre type to the floor surface rather than the price list. Compare rated capacity against the heaviest single load you move.
The specification sheet records Roller diameter: 38mm or 50mm (single-row galvanized rollers, special bearing); Conveying surface width (mm): 450 / 500 / 600; Expansion ratio: 3:1.
Remaining parameters are listed row by row in the specification table.
Those missing values can be requested directly through the enquiry form.
Options and attachments are listed separately from the base chassis.
Units are copied as published; convert them only when comparing models.
Rated figures apply at the standard load centre unless a row says otherwise.
Configuration follows the load, working height and site layout.
Dimensions in the table come from the source record.
Door and beam heights decide which mast will clear the route.
Compare the lowered height against the lowest door on the route.
Note any attachment that changes the load centre or the overall width.
Check the chassis width against the aisle and the container door.
List the models that clear each constraint before asking for a quote.
On the Single-Roller Conveyor, mark the stations where loads are picked up and dropped off each shift.
Send photographs of the racking and the existing working area when possible.
On the Single-Roller Conveyor, check headroom under beams, pipes and door frames along the route.
Note any slope, threshold or step along the working route.
On the Single-Roller Conveyor, check the lowest door, beam height and aisle the truck has to pass through.
On the Single-Roller Conveyor, attachments are secured before the machine leaves the station.
Routine checks cover tyres, brakes, controls and visible leaks.
On the Single-Roller Conveyor, the operator follows the rated capacity marked on the chassis.
Unusual noise or movement is reported before further use.
On the Single-Roller Conveyor, attachments such as clamps or rotators are matched to the load shape.
Related models in the same group are listed on the family page.
On the Single-Roller Conveyor, the receiving side pairs it with a dock ramp or platform where needed.
The layout drawing shows where each machine sits in the operation.
On the Single-Roller Conveyor, the signed datasheet issued with the quotation is the binding version.
The specification sheet is the binding reference for listed values.
On the Single-Roller Conveyor, attachments are quoted separately once the base chassis is fixed.
Tyre choice should match the floor rather than the price list.
On the Single-Roller Conveyor, the enquiry should include the quantity and destination port.
Packing follows sea-freight practice for the chosen chassis.
On the Single-Roller Conveyor, the booking reference is issued with the proforma invoice.
Documents issued for an order are listed in the quotation.
Test and conformity documents follow the model and destination market.
The parts manual lists the wear items and their reference views.
The operation material covers controls, checks and routine service points.
Questions
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Conveyors related models
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.