flexible roller conveyor Conveyor. Loading and unloading stations run steadier once the path is on a belt.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Conveyor Models | flexible roller conveyor |
| Roller Material | Zinc Steel |
| Roller Diameter | 50mm |
| Frame Material | Carbon Steel |
| Conveyor Height | 620-990mm(24.4"-39") |
| Conveyor Width | 400/500/600/700mm |
| Standard Length | 2000-4800mm(6.6'-15.7') |
| Loading Capability | 300 |
Gallery
All detail images published for this model.

flexible roller conveyor Conveyor, part of the Conveyors line.
Roller, skate-wheel and telescopic conveyors for carton and bag flow into and out of containers.
Container unloading flow
Flexible and powered belts cut walking distance inside a warehouse.
Belt width and length follow the package size and station layout.
Loading and unloading stations run steadier once the path is on a belt.
Loading and unloading stations run steadier once the path is on a belt.
Confirm the charger voltage or fuel type for your destination country. Note cold store, outdoor gradient or container entry as a constraint.
The specification sheet records Conveyor Models: flexible roller conveyor; Roller Material: Zinc Steel; Roller Diameter: 50mm; Frame Material: Carbon Steel; Conveyor Height: 620-990mm(24.4"-39"); Conveyor Width: 400/500/600/700mm.
The specification sheet records Standard Length: 2000-4800mm(6.6'-15.7'); Loading Capability (kg/m): 300.
Units are copied as published; convert them only when comparing models.
Rated figures apply at the standard load centre unless a row says otherwise.
Options and attachments are listed separately from the base chassis.
Those missing values can be requested directly through the enquiry form.
Configuration follows the load, working height and site layout.
Dimensions in the table come from the source record.
Measure the pallet footprint before the chassis is shortlisted.
Review the tyre type against the surface the machine will run on.
Check the machine weight against floor loading where the site is raised.
Compare capacity first, then the lift height the job actually needs.
Match the power arrangement to the shifts and the working environment.
On the flexible roller conveyor, list the attachments required, such as clamps, sideshift or rotator.
Mark the stations where loads are picked up and dropped off each shift.
On the flexible roller conveyor, note any slope, threshold or step along the working route.
State the shifts per day so the power arrangement can be sized properly.
On the flexible roller conveyor, check the lowest door, beam height and aisle the truck has to pass through.
On the flexible roller conveyor, battery or fuel levels are checked at the start of each shift.
Attachments are secured before the machine leaves the station.
On the flexible roller conveyor, the operator follows the rated capacity marked on the chassis.
The working area is kept clear of loose packaging and obstacles.
On the flexible roller conveyor, the layout drawing shows where each machine sits in the operation.
Attachments such as clamps or rotators are matched to the load shape.
On the flexible roller conveyor, this machine usually works alongside pallet trucks and stacking equipment.
Spare parts for wear items follow the parts manual after delivery.
On the flexible roller conveyor, site conditions such as gradient, dust and moisture belong in the enquiry.
The signed datasheet issued with the quotation is the binding version.
On the flexible roller conveyor, dimensions are checked against the source record before quoting.
Attachments are quoted separately once the base chassis is fixed.
On the flexible roller conveyor, loading is recorded before the container is sealed.
The enquiry should include the quantity and destination port.
On the flexible roller conveyor, quote the serial number and component name when ordering spares.
Mixed equipment can be listed on one enquiry.
Test and conformity documents follow the model and destination market.
The serial number identifies the build when parts are ordered later.
Ask for the specific certificate required for your target country.
Questions
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Conveyors related models
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.