Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

Gravity Roller Conveyor Moudle — flexible conveyor

Gravity Roller Conveyor Moudle Conveyor, rated capacity 200 kg/m. Flexible sections fold away when the transport run is not in use.

Gravity Roller Conveyor Moudle flexible conveyor — product photo 1 of 2

Ordering facts for the Gravity Roller Conveyor Moudle

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

Gravity Roller Conveyor Moudle specification

Values are copied from the source record in their original order and units.

Gravity Roller Conveyor Moudle specification table
ParameterValue
Roller diameter50mm, 60mm, 63.5mm, 76mm, 89mm etc
Length of conveyor1000, 1500, 2000, 3000(mm), 5000, 6000 etc
Frame width300 / 400 / 500 / 600 / 700(mm)
Width suitable for packing box≤250 / 350 / 450 / 550 / 650(mm)
Roller materialsteel
Mounting method of rollerSpring press-in type
Roller pitch75mm, 100mm, 150mm
Load per roller40 kg
Conveying capacity200
colorBlue, gray, green
Request price Datasheet (print / save as PDF) Ask about configuration

Gallery

Product photographs

All detail images published for this model.

What this model is built to do

Gravity Roller Conveyor Moudle Conveyor, part of the Conveyors line.

Roller, skate-wheel and telescopic conveyors for carton and bag flow into and out of containers.

Container unloading flow

Published figures for this build: rated capacity 200 kg/m.

They pair with pallet trucks and stackers at the feed and discharge ends.

Belt width and length follow the package size and station layout.

Loading and unloading stations run steadier once the path is on a belt.

Flexible and powered belts cut walking distance inside a warehouse.

Compare rated capacity against the heaviest single load you move. Check closed mast or chassis height against the lowest door on the route.

Specification walk-through

The specification sheet records Roller diameter: 50mm, 60mm, 63.5mm, 76mm, 89mm etc; Length of conveyor: 1000, 1500, 2000, 3000(mm), 5000, 6000 etc; Frame width: 300 / 400 / 500 / 600 / 700(mm); Width suitable for packing box≤: 250 / 350 / 450 / 550 / 650(mm); Roller material: steel; Mounting method of roller: Spring press-in type.

The specification sheet records Roller pitch: 75mm, 100mm, 150mm; Load per roller (kg): 40 kg; Conveying capacity (kg/m): 200; color: Blue, gray, green.

Those missing values can be requested directly through the enquiry form.

Each row in the table keeps the label and value from the source record.

Options and attachments are listed separately from the base chassis.

Units are copied as published; convert them only when comparing models.

How to specify the right build

Configuration follows the load, working height and site layout.

Send pallet size, door height and aisle width with the enquiry.

Measure the pallet footprint before the chassis is shortlisted.

Check the machine weight against floor loading where the site is raised.

Compare capacity first, then the lift height the job actually needs.

Compare the lowered height against the lowest door on the route.

Note any attachment that changes the load centre or the overall width.

  • List the load per move, lift height and floor surface before comparing models.
  • Send those figures with the model code; the reply confirms whether the chassis suits.
  • Note any constraint: low door, narrow aisle, cold store, outdoor gradient or entry.

Site preparation and operating notes

On the Gravity Roller Conveyor Moudle, list the attachments required, such as clamps, sideshift or rotator.

Check headroom under beams, pipes and door frames along the route.

On the Gravity Roller Conveyor Moudle, mark the stations where loads are picked up and dropped off each shift.

Note any slope, threshold or step along the working route.

On the Gravity Roller Conveyor Moudle, measure the pallet footprint and the heaviest single load before comparing models.

Operation and routine checks

On the Gravity Roller Conveyor Moudle, loads are kept low while travelling between stations.

The working area is kept clear of loose packaging and obstacles.

On the Gravity Roller Conveyor Moudle, unusual noise or movement is reported before further use.

Routine checks cover tyres, brakes, controls and visible leaks.

How this model fits the operation

On the Gravity Roller Conveyor Moudle, a mixed enquiry can list this model together with other families.

The layout drawing shows where each machine sits in the operation.

On the Gravity Roller Conveyor Moudle, related models in the same group are listed on the family page.

Attachments such as clamps or rotators are matched to the load shape.

Working conditions and honest limits

On the Gravity Roller Conveyor Moudle, site conditions such as gradient, dust and moisture belong in the enquiry.

Dimensions are checked against the source record before quoting.

On the Gravity Roller Conveyor Moudle, capacity above the rated lift height follows the mast curve.

The specification sheet is the binding reference for listed values.

Delivery, documents and support

On the Gravity Roller Conveyor Moudle, the booking reference is issued with the proforma invoice.

Loading is recorded before the container is sealed.

On the Gravity Roller Conveyor Moudle, documents issued for an order are listed in the quotation.

Quote the serial number and component name when ordering spares.

The operation material covers controls, checks and routine service points.

Ask for the specific certificate required for your target country.

Test and conformity documents follow the model and destination market.

Before you order

  • The rated load applies at the standard load centre; carrying the load farther forward reduces the figure marked on the chassis plate.
  • Dimensions in the specification come from the source record — check them against the container door, the lowest door on the route and the aisle before ordering.
  • Any clamp, sideshift or rotator changes the load centre and must be listed alongside the base model.
  • CE or GS documentation where applicable is listed in the quotation together with the factory quality certificates.
  • The parts manual ships with the machine; identify wear items by serial number and part name when reordering.

Questions

Questions buyers ask before ordering

What load does the Gravity Roller Conveyor Moudle carry?+

The listed rated capacity is 200 kg/m at the standard load centre. Above the rated lift height capacity derates along the mast curve.

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

What does the price depend on?+

Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.

What is the minimum order quantity?+

The minimum order quantity is one set, and mixed models can be combined in one container.

How is payment arranged?+

Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Conveyors related models

ModelCapacityLiftPowerTypical use
Single-Roller———Roller carton flow
Double———Roller carton flow
flexible———Container unloading flow
Motorized flexible Roller conveyor———Truck loading station feed
steel300 kg/m——Truck loading station feed

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.