Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

SRMC 10-75 — stacker

SRMC 10-75 Electric Stacker, lift height 7500. Stackers keep the pallet close to the legs while lifting at height.

SRMC 10-75 stacker — product photo 1 of 7

Ordering facts for the SRMC 10-75

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

SRMC 10-75 specification

Values are copied from the source record in their original order and units.

SRMC 10-75 specification table
ParameterValue
Description Model No.SRMC 10-75
Rated Capacity1000 kg at 6000mm,750 kg at 7500mm
Load Dimensions ---mm1250*1250
Operate TypeStand-on
Max. Lifting Height7500
Min. Turning Radius1880
Min. Stacking Aisle ---mm1480
Max Travel Speed km/h-laden/unladen7.0/8.0
Load center MM500
Fork Dimensions -L/W/T---mm1070*100*35
Shift Stroke (1000/1100mm pallet)--mm1060/1160
Lifting Speed (MM/S)-laden/unladen180/315
Rotating Speed of forks---s/180o12
Shift Speed ---mm/s240
Overall Length3454
Overall Width1450
Height-Overhead guard--mm2320
Height---Mast Lowered3750
Height-Mast Extended w/ Load-Backrest -mm8525
Fork Spread Range260-820
Min Ground Clearance--mm40
Max. Gradeability ---%10
Wheel TypePolyurethane Solid Tyre
Driving WheelΦ343×108
Balance WheelΦ180×76
Front WheelΦ140×100
Battery V/AH- Domestic BRAND48V /300 AH
Service BrakeMech.
Parking BrakeMech.
Charger-Intelligent48V /50 A
Driving Motor5.5 (AC)
Lifting Motor7.5
Request price Datasheet (print / save as PDF) Ask about voltage

Gallery

Product photographs

All detail images published for this model.

What this model is built to do

SRMC 10-75 Electric Stacker, part of the Stackers and order pickers line.

Walk-behind, ride-on and semi-electric stackers plus order picking platform trucks.

Pallet stacking to racking

Published figures for this build: rated capacity 1000 kg at 6000mm,750 kg at 7500mm, lift height 7500, overall width 1450 MM, turning radius 1880 MM.

This class handles put-away and retrieval on pallet racking.

Straddle legs carry the mast forward for a much narrower aisle.

This class handles put-away and retrieval on pallet racking.

This class handles put-away and retrieval on pallet racking.

Confirm the aisle width against the pallet depth before choosing a chassis. Describe the shifts per day when the power arrangement is selected.

Specification walk-through

The specification sheet records Description Model No.: SRMC 10-75; Rated Capacity (KG): 1000 kg at 6000mm,750 kg at 7500mm; Load Dimensions ---mm: 1250*1250; Operate Type: Stand-on; Max. Lifting Height (MM): 7500; Min. Turning Radius (MM): 1880.

The specification sheet records Min. Stacking Aisle ---mm (1000*1000 Pallet): 1480; Max Travel Speed km/h-laden/unladen: 7.0/8.0; Load center MM: 500; Fork Dimensions -L/W/T---mm: 1070*100*35; Shift Stroke (1000/1100mm pallet)--mm: 1060/1160; Lifting Speed (MM/S)-laden/unladen: 180/315.

The specification sheet records Rotating Speed of forks---s/180o: 12; Shift Speed ---mm/s: 240; Overall Length (MM): 3454; Overall Width (MM): 1450; Height-Overhead guard--mm: 2320; Height---Mast Lowered (MM): 3750.

The specification sheet records Height-Mast Extended w/ Load-Backrest -mm: 8525; Fork Spread Range (MM): 260-820; Min Ground Clearance--mm: 40; Max. Gradeability ---%: 10; Wheel Type: Polyurethane Solid Tyre; Driving Wheel (MM): Φ343×108.

The specification sheet records Balance Wheel (MM): Φ180×76; Front Wheel (MM): Φ140×100; Battery V/AH- Domestic BRAND (ah): 48V /300 AH; Service Brake: Mech.; Parking Brake: Mech.; Charger-Intelligent: 48V /50 A.

The specification sheet records Driving Motor (KW): 5.5 (AC); Lifting Motor (KW): 7.5.

An em dash marks a value the source record did not publish.

Rated figures apply at the standard load centre unless a row says otherwise.

Each row in the table keeps the label and value from the source record.

Those missing values can be requested directly through the enquiry form.

How to specify the right build

Configuration follows the load, working height and site layout.

The listed figures follow the record; options are confirmed on the quotation.

Dimensions in the table come from the source record.

Compare the lowered height against the lowest door on the route.

Check the machine weight against floor loading where the site is raised.

Match the power arrangement to the shifts and the working environment.

Review the tyre type against the surface the machine will run on.

  • List the load per move, lift height and floor surface before comparing models.
  • Send those figures with the model code; the reply confirms whether the chassis suits.
  • State the shifts per day so the power arrangement can be sized properly.

Site preparation and operating notes

On the SRMC 10-75, send photographs of the racking and the existing working area when possible.

List the attachments required, such as clamps, sideshift or rotator.

On the SRMC 10-75, measure the pallet footprint and the heaviest single load before comparing models.

Note any slope, threshold or step along the working route.

On the SRMC 10-75, check the lowest door, beam height and aisle the truck has to pass through.

Operation and routine checks

On the SRMC 10-75, the operator follows the rated capacity marked on the chassis.

The working area is kept clear of loose packaging and obstacles.

On the SRMC 10-75, loads are kept low while travelling between stations.

Attachments are secured before the machine leaves the station.

How this model fits the operation

On the SRMC 10-75, storage cages and racking organise the loads it moves between stations.

Attachments such as clamps or rotators are matched to the load shape.

On the SRMC 10-75, the receiving side pairs it with a dock ramp or platform where needed.

The layout drawing shows where each machine sits in the operation.

Working conditions and honest limits

On the SRMC 10-75, site conditions such as gradient, dust and moisture belong in the enquiry.

Dimensions are checked against the source record before quoting.

On the SRMC 10-75, capacity above the rated lift height follows the mast curve.

The signed datasheet issued with the quotation is the binding version.

Delivery, documents and support

On the SRMC 10-75, quote the serial number and component name when ordering spares.

The booking reference is issued with the proforma invoice.

On the SRMC 10-75, loading is recorded before the container is sealed.

The operation and parts material travel with the machine.

The parts manual lists the wear items and their reference views.

The serial number identifies the build when parts are ordered later.

Ask for the specific certificate required for your target country.

Before you order

  • Compare the published capacity against the heaviest single move before the mast or attachment is chosen.
  • Measure the lowered chassis and mast height against the lowest door and the container door on the planned route.
  • Attachments are quoted separately once the base chassis is fixed, so the attachment weight can be counted against the residual capacity.
  • Documents issued with the order: ISO 9001, ISO 14001 and ISO 18001 factory certificates, plus CE or GS where the model carries it, and the serial list for the shipment.
  • Wear parts are ordered after delivery against the parts manual, the serial number and the component name.

Container loading estimate

Published overall dimensions for this build are about 3.454 m long and 1.45 m wide.

On a standard 20GP dry-van floor that footprint allows about 1 unit(s) per layer; a 40HQ allows about 3 unit(s) per layer.

The count is a footprint estimate against standard dry-van internal dimensions, not a loading guarantee. Final blocking, bracing and stacking follow the loading plan confirmed before sealing, and this model can be combined with other families in one container where the floor allows.

The published height of about 2.32 m sits within the standard dry-van interior headroom.

Questions

Questions buyers ask before ordering

What lift height is available?+

The specification sheet lists 7500 for this build. Send the rack beam and door heights together to size the mast.

What load centre applies to the rating?+

The specification lists a load centre of 500. Loads carried farther forward reduce rated capacity.

What aisle width does it need?+

The listed turning radius is 1880. Aisle width also depends on pallet depth and fork length.

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

What does the price depend on?+

Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Stackers and order pickers related models

ModelCapacityLiftPowerTypical use
PWSR500 kg——Narrow-aisle put-away
WSR1000 kg——Walk-behind pallet lifting
CTY-A—1600—Low-level pallet stacking
CTY-D—1600—Narrow-aisle put-away
CTY-E—1600—Walk-behind pallet lifting

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.