SR-202 Electric platform truck, rated capacity 800 kg. Stackers work in narrow aisles where a counterbalance truck will not turn.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | SR-202 |
| Capacity | 800 kg |
| Product size | 2274x812x1036 mm |
| Tray size | 1511x812x611 mm |
| Max height | 800 mm |
| Driving motor | 800w |
| Lifting motor | 800w |
| Driving speed | 5~8 |
| Battery | 3x12v/55ah |
| Controller | 70A |
| N.w | 280 kg |
Gallery
All detail images published for this model.



SR-202 Electric platform truck, part of the Stackers and order pickers line.
Walk-behind, ride-on and semi-electric stackers plus order picking platform trucks.
Walk-behind pallet lifting
Published figures for this build: rated capacity 800 kg.
Stackers work in narrow aisles where a counterbalance truck will not turn.
Straddle legs carry the mast forward for a much narrower aisle.
Stackers work in narrow aisles where a counterbalance truck will not turn.
Stackers keep the pallet close to the legs while lifting at height.
Confirm the charger voltage or fuel type for your destination country. Match the tyre type to the floor surface rather than the price list.
The specification sheet records Model: SR-202; Capacity (kg): 800 kg; Product size (mm): 2274x812x1036 mm; Tray size (mm): 1511x812x611 mm; Max height (mm): 800 mm; Driving motor: 800w.
The specification sheet records Lifting motor: 800w; Driving speed (km/h): 5~8; Battery: 3x12v/55ah; Controller: 70A; N.w (kg): 280 kg.
Each row in the table keeps the label and value from the source record.
An em dash marks a value the source record did not publish.
Those missing values can be requested directly through the enquiry form.
Options and attachments are listed separately from the base chassis.
Configuration follows the load, working height and site layout.
Door and beam heights decide which mast will clear the route.
The enquiry should list any attachment the job requires.
Compare capacity first, then the lift height the job actually needs.
Check the machine weight against floor loading where the site is raised.
Note any attachment that changes the load centre or the overall width.
Review the tyre type against the surface the machine will run on.
On the SR-202, check the lowest door, beam height and aisle the truck has to pass through.
Measure the pallet footprint and the heaviest single load before comparing models.
On the SR-202, keep the charging or refuelling position clear of the main traffic aisle.
Send photographs of the racking and the existing working area when possible.
On the SR-202, state the shifts per day so the power arrangement can be sized properly.
On the SR-202, the operator follows the rated capacity marked on the chassis.
Unusual noise or movement is reported before further use.
On the SR-202, the working area is kept clear of loose packaging and obstacles.
Routine checks cover tyres, brakes, controls and visible leaks.
On the SR-202, related models in the same group are listed on the family page.
Storage cages and racking organise the loads it moves between stations.
On the SR-202, the receiving side pairs it with a dock ramp or platform where needed.
Spare parts for wear items follow the parts manual after delivery.
On the SR-202, dimensions are checked against the source record before quoting.
Capacity above the rated lift height follows the mast curve.
On the SR-202, the signed datasheet issued with the quotation is the binding version.
Site conditions such as gradient, dust and moisture belong in the enquiry.
On the SR-202, the enquiry should include the quantity and destination port.
The operation and parts material travel with the machine.
On the SR-202, wear parts are supplied after delivery against the parts manual.
Packing follows sea-freight practice for the chosen chassis.
The serial number identifies the build when parts are ordered later.
The parts manual lists the wear items and their reference views.
Ask for the specific certificate required for your target country.
Questions
The listed rated capacity is 800 kg at the standard load centre. Above the rated lift height capacity derates along the mast curve.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.