SR-115 Electric platform truck, rated capacity 700 kg. Walk-behind and stand-on stackers put loads straight onto racking.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | SR-115 |
| Capacity | 700 kg |
| Product size | 2150x900x1110 mm |
| Table size | 1600x790 mm |
| Driving motor | 800w |
| Driving speed | 5~8 |
| Battery | 3x12v/55ah |
| Controller | 70A |
| N.w | 170 kg |
Gallery
All detail images published for this model.

SR-115 Electric platform truck, part of the Stackers and order pickers line.
Walk-behind, ride-on and semi-electric stackers plus order picking platform trucks.
Aisle stacking duties
Published figures for this build: rated capacity 700 kg.
Stackers keep the pallet close to the legs while lifting at height.
The walk-behind model leaves the operator free to guide each load.
This class handles put-away and retrieval on pallet racking.
Stackers work in narrow aisles where a counterbalance truck will not turn.
Confirm the aisle width against the pallet depth before choosing a chassis. Note cold store, outdoor gradient or container entry as a constraint.
The specification sheet records Model: SR-115; Capacity (kg): 700 kg; Product size (mm): 2150x900x1110 mm; Table size (mm): 1600x790 mm; Driving motor: 800w; Driving speed (km/h): 5~8.
The specification sheet records Battery: 3x12v/55ah; Controller: 70A; N.w (kg): 170 kg.
Units are copied as published; convert them only when comparing models.
Each row in the table keeps the label and value from the source record.
Options and attachments are listed separately from the base chassis.
Rated figures apply at the standard load centre unless a row says otherwise.
Configuration follows the load, working height and site layout.
Measure the pallet footprint before the chassis is shortlisted.
The enquiry should list any attachment the job requires.
Check the machine weight against floor loading where the site is raised.
Match the power arrangement to the shifts and the working environment.
List the models that clear each constraint before asking for a quote.
Compare capacity first, then the lift height the job actually needs.
On the SR-115, state the shifts per day so the power arrangement can be sized properly.
Mark the stations where loads are picked up and dropped off each shift.
On the SR-115, keep the charging or refuelling position clear of the main traffic aisle.
Describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
On the SR-115, measure the pallet footprint and the heaviest single load before comparing models.
On the SR-115, the working area is kept clear of loose packaging and obstacles.
Loads are kept low while travelling between stations.
On the SR-115, unusual noise or movement is reported before further use.
Battery or fuel levels are checked at the start of each shift.
On the SR-115, spare parts for wear items follow the parts manual after delivery.
Storage cages and racking organise the loads it moves between stations.
On the SR-115, related models in the same group are listed on the family page.
Attachments such as clamps or rotators are matched to the load shape.
On the SR-115, site conditions such as gradient, dust and moisture belong in the enquiry.
Tyre choice should match the floor rather than the price list.
On the SR-115, capacity above the rated lift height follows the mast curve.
The specification sheet is the binding reference for listed values.
On the SR-115, quote the serial number and component name when ordering spares.
The operation and parts material travel with the machine.
On the SR-115, loading is recorded before the container is sealed.
The enquiry should include the quantity and destination port.
Test and conformity documents follow the model and destination market.
The serial number identifies the build when parts are ordered later.
The operation material covers controls, checks and routine service points.
Questions
The listed rated capacity is 700 kg at the standard load centre. Above the rated lift height capacity derates along the mast curve.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.