SR-108 Electric platform truck, rated capacity 400 kg. Straddle legs carry the mast forward for a much narrower aisle.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | SR-108 |
| Capacity | 400 kg |
| Product size | 1455x630x1080 mm |
| Table size | 1280*920 mm |
| Driving motor | 400w |
| Driving speed | 5~8 |
| Battery | 2x12v/33ah |
| Controller | 70A |
| N.w | 113 kg |
Gallery
All detail images published for this model.


SR-108 Electric platform truck, part of the Stackers and order pickers line.
Walk-behind, ride-on and semi-electric stackers plus order picking platform trucks.
Aisle stacking duties
Published figures for this build: rated capacity 400 kg.
This class handles put-away and retrieval on pallet racking.
Stackers keep the pallet close to the legs while lifting at height.
Walk-behind and stand-on stackers put loads straight onto racking.
Walk-behind and stand-on stackers put loads straight onto racking.
Confirm the aisle width against the pallet depth before choosing a chassis. Note cold store, outdoor gradient or container entry as a constraint.
The specification sheet records Model: SR-108; Capacity (kg): 400 kg; Product size (mm): 1455x630x1080 mm; Table size (mm): 1280*920 mm; Driving motor: 400w; Driving speed (km/h): 5~8.
The specification sheet records Battery: 2x12v/33ah; Controller: 70A; N.w (kg): 113 kg.
An em dash marks a value the source record did not publish.
Units are copied as published; convert them only when comparing models.
Each row in the table keeps the label and value from the source record.
Those missing values can be requested directly through the enquiry form.
Configuration follows the load, working height and site layout.
Measure the pallet footprint before the chassis is shortlisted.
The listed figures follow the record; options are confirmed on the quotation.
Match the power arrangement to the shifts and the working environment.
Review the tyre type against the surface the machine will run on.
List the models that clear each constraint before asking for a quote.
Compare the lowered height against the lowest door on the route.
On the SR-108, note any slope, threshold or step along the working route.
Check headroom under beams, pipes and door frames along the route.
On the SR-108, check the lowest door, beam height and aisle the truck has to pass through.
Describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
On the SR-108, measure the pallet footprint and the heaviest single load before comparing models.
On the SR-108, the working area is kept clear of loose packaging and obstacles.
Routine checks cover tyres, brakes, controls and visible leaks.
On the SR-108, attachments are secured before the machine leaves the station.
Unusual noise or movement is reported before further use.
On the SR-108, the receiving side pairs it with a dock ramp or platform where needed.
Attachments such as clamps or rotators are matched to the load shape.
On the SR-108, the layout drawing shows where each machine sits in the operation.
Spare parts for wear items follow the parts manual after delivery.
On the SR-108, site conditions such as gradient, dust and moisture belong in the enquiry.
Any option not listed should be confirmed in writing before order.
On the SR-108, the signed datasheet issued with the quotation is the binding version.
The specification sheet is the binding reference for listed values.
On the SR-108, wear parts are supplied after delivery against the parts manual.
The enquiry should include the quantity and destination port.
On the SR-108, quote the serial number and component name when ordering spares.
Documents issued for an order are listed in the quotation.
The serial number identifies the build when parts are ordered later.
The operation material covers controls, checks and routine service points.
Test and conformity documents follow the model and destination market.
Questions
The listed rated capacity is 400 kg at the standard load centre. Above the rated lift height capacity derates along the mast curve.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.