Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

SEM10-20 / SEM10-25 / SEM10-30 / SEM10-35 / SEM15-20 / SEM15-25 / SEM15-30 / SEM15-35 / SEM20-20 — stacker

SEM10-20 / SEM10-25 / SEM10-30 / SEM10-35 / SEM15-20 / SEM15-25 / SEM15-30 / SEM15-35 / SEM20-20 Semi-electric Stacker. Stackers work in narrow aisles where a counterbalance truck will not turn.

SEM10-20 / SEM10-25 / SEM10-30 / SEM10-35 / SEM15-20 / SEM15-25 / SEM15-30 / SEM15-35 / SEM20-20 stacker — product photo 1 of 1

Ordering facts for the SEM10-20 / SEM10-25 / SEM10-30 / SEM10-35 / SEM15-20 / SEM15-25 / SEM15-30 / SEM15-35 / SEM20-20

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

SEM10-20 / SEM10-25 / SEM10-30 / SEM10-35 / SEM15-20 / SEM15-25 / SEM15-30 / SEM15-35 / SEM20-20 specification

Values are copied from the source record in their original order and units.

SEM10-20 / SEM10-25 / SEM10-30 / SEM10-35 / SEM15-20 / SEM15-25 / SEM15-30 / SEM15-35 / SEM20-20 specification table
ParameterValue
ModelSEM10-20 / SEM10-25 / SEM10-30 / SEM10-35 / SEM15-20 / SEM15-25 / SEM15-30 / SEM15-35 / SEM20-20
Capacity1000 / 1500 / 2000 kg
Load Center4000 mm
Max.Fork Height2000 / 2500 / 3000 / 3500 mm
Max.Machine Height2560 / 3060 / 3560 / 4060 mm
Fork Size1000 mm
Fork Width300-680 mm
Min.Turning Radius1350 / 1450 mm
Wheel Base1185 mm
Front-Wheel Distance316 mm
Lifting Motor12/1.5-1.6
Aneroid Battery12/120-150
Charger12/15
Overall Length1660 mm
Overall Width810 / 930 mm
Overall Height1580 / 1830 / 2080 / 2330 mm
Overall Net Weight425 / 450 / 470 / 500 / 475 / 495 / 520 kg
Request price Datasheet (print / save as PDF) Ask about voltage

What this model is built to do

SEM10-20 / SEM10-25 / SEM10-30 / SEM10-35 / SEM15-20 / SEM15-25 / SEM15-30 / SEM15-35 / SEM20-20 Semi-electric Stacker, part of the Stackers and order pickers line.

Walk-behind, ride-on and semi-electric stackers plus order picking platform trucks.

Pallet stacking to racking

Published figures for this build: rated capacity 1000 / 1500 / 2000 kg, overall width 810 / 930 mm, turning radius 1350 / 1450 mm.

Stackers work in narrow aisles where a counterbalance truck will not turn.

This class handles put-away and retrieval on pallet racking.

Stackers keep the pallet close to the legs while lifting at height.

Stackers keep the pallet close to the legs while lifting at height.

State any attachment required alongside the base model. Note cold store, outdoor gradient or container entry as a constraint.

Specification walk-through

The specification sheet records Model: SEM10-20 / SEM10-25 / SEM10-30 / SEM10-35 / SEM15-20 / SEM15-25 / SEM15-30 / SEM15-35 / SEM20-20; Capacity (Q): 1000 / 1500 / 2000 kg; Load Center (C): 4000 mm; Max.Fork Height (H3): 2000 / 2500 / 3000 / 3500 mm; Max.Machine Height (H4): 2560 / 3060 / 3560 / 4060 mm; Fork Size (L): 1000 mm.

The specification sheet records Fork Width (E): 300-680 mm; Min.Turning Radius (R): 1350 / 1450 mm; Wheel Base (Y): 1185 mm; Front-Wheel Distance (X): 316 mm; Lifting Motor (v/kw): 12/1.5-1.6; Aneroid Battery (v/ah): 12/120-150.

The specification sheet records Charger (v/ah): 12/15; Overall Length (mm): 1660 mm; Overall Width (mm): 810 / 930 mm; Overall Height (mm): 1580 / 1830 / 2080 / 2330 mm; Overall Net Weight (kg): 425 / 450 / 470 / 500 / 475 / 495 / 520 kg.

Options and attachments are listed separately from the base chassis.

Those missing values can be requested directly through the enquiry form.

Each row in the table keeps the label and value from the source record.

Units are copied as published; convert them only when comparing models.

How to specify the right build

Configuration follows the load, working height and site layout.

Measure the pallet footprint before the chassis is shortlisted.

Door and beam heights decide which mast will clear the route.

Compare the lowered height against the lowest door on the route.

Compare capacity first, then the lift height the job actually needs.

Note any attachment that changes the load centre or the overall width.

Check the machine weight against floor loading where the site is raised.

  • Note any constraint: low door, narrow aisle, cold store, outdoor gradient or entry.
  • State the shifts per day so the power arrangement can be sized properly.
  • List attachments such as clamps, sideshift or rotator separately.

Site preparation and operating notes

On the SEM10-20 / SEM10-25 / SEM10-30 / SEM10-35 / SEM15-20 / SEM15-25 / SEM15-30 / SEM15-35 / SEM20-20, mark the stations where loads are picked up and dropped off each shift.

State the shifts per day so the power arrangement can be sized properly.

On the SEM10-20 / SEM10-25 / SEM10-30 / SEM10-35 / SEM15-20 / SEM15-25 / SEM15-30 / SEM15-35 / SEM20-20, describe the floor surface: sealed concrete, asphalt, gravel or packed earth.

List the attachments required, such as clamps, sideshift or rotator.

On the SEM10-20 / SEM10-25 / SEM10-30 / SEM10-35 / SEM15-20 / SEM15-25 / SEM15-30 / SEM15-35 / SEM20-20, measure the pallet footprint and the heaviest single load before comparing models.

Operation and routine checks

On the SEM10-20 / SEM10-25 / SEM10-30 / SEM10-35 / SEM15-20 / SEM15-25 / SEM15-30 / SEM15-35 / SEM20-20, the operator follows the rated capacity marked on the chassis.

Unusual noise or movement is reported before further use.

On the SEM10-20 / SEM10-25 / SEM10-30 / SEM10-35 / SEM15-20 / SEM15-25 / SEM15-30 / SEM15-35 / SEM20-20, loads are kept low while travelling between stations.

Attachments are secured before the machine leaves the station.

How this model fits the operation

On the SEM10-20 / SEM10-25 / SEM10-30 / SEM10-35 / SEM15-20 / SEM15-25 / SEM15-30 / SEM15-35 / SEM20-20, the layout drawing shows where each machine sits in the operation.

Spare parts for wear items follow the parts manual after delivery.

On the SEM10-20 / SEM10-25 / SEM10-30 / SEM10-35 / SEM15-20 / SEM15-25 / SEM15-30 / SEM15-35 / SEM20-20, storage cages and racking organise the loads it moves between stations.

The receiving side pairs it with a dock ramp or platform where needed.

Working conditions and honest limits

On the SEM10-20 / SEM10-25 / SEM10-30 / SEM10-35 / SEM15-20 / SEM15-25 / SEM15-30 / SEM15-35 / SEM20-20, any option not listed should be confirmed in writing before order.

Attachments are quoted separately once the base chassis is fixed.

On the SEM10-20 / SEM10-25 / SEM10-30 / SEM10-35 / SEM15-20 / SEM15-25 / SEM15-30 / SEM15-35 / SEM20-20, capacity above the rated lift height follows the mast curve.

The specification sheet is the binding reference for listed values.

Delivery, documents and support

On the SEM10-20 / SEM10-25 / SEM10-30 / SEM10-35 / SEM15-20 / SEM15-25 / SEM15-30 / SEM15-35 / SEM20-20, mixed equipment can be listed on one enquiry.

The operation and parts material travel with the machine.

On the SEM10-20 / SEM10-25 / SEM10-30 / SEM10-35 / SEM15-20 / SEM15-25 / SEM15-30 / SEM15-35 / SEM20-20, loading is recorded before the container is sealed.

Documents issued for an order are listed in the quotation.

The parts manual lists the wear items and their reference views.

The operation material covers controls, checks and routine service points.

Test and conformity documents follow the model and destination market.

Before you order

  • The rated load applies at the standard load centre; carrying the load farther forward reduces the figure marked on the chassis plate.
  • Dimensions in the specification come from the source record — check them against the container door, the lowest door on the route and the aisle before ordering.
  • Attachments are quoted separately once the base chassis is fixed, so the attachment weight can be counted against the residual capacity.
  • CE or GS documentation where applicable is listed in the quotation together with the factory quality certificates.
  • Wear parts are ordered after delivery against the parts manual, the serial number and the component name.

Questions

Questions buyers ask before ordering

What load centre applies to the rating?+

The specification lists a load centre of 4000 mm. Loads carried farther forward reduce rated capacity.

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

What does the price depend on?+

Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.

What is the minimum order quantity?+

The minimum order quantity is one set, and mixed models can be combined in one container.

How is payment arranged?+

Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Stackers and order pickers related models

ModelCapacityLiftPowerTypical use
PWSR500 kg——Narrow-aisle put-away
WSR1000 kg——Walk-behind pallet lifting
CTY-A—1600—Low-level pallet stacking
CTY-D—1600—Narrow-aisle put-away
CTY-E—1600—Walk-behind pallet lifting

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.