Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

Self-lift stacker 300kgs/500kgs/1000kgs — stacker

Self-lift stacker 300kgs/500kgs/1000kgs Self-lift stacker 300kgs/500kgs/1000kgs. This class handles put-away and retrieval on pallet racking.

Self-lift stacker stacker — product photo 1 of 7

Ordering facts for the Self-lift stacker 300kgs/500kgs/1000kgs

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

Self-lift stacker 300kgs/500kgs/1000kgs specification

Values are copied from the source record in their original order and units.

Self-lift stacker 300kgs/500kgs/1000kgs specification table
ParameterUnitESL30ESL50
Model—ESL30ESL50
Lifting type—ElectricElectric
Moving type—ManualManual
Total lengthmm14101410
Total widthmm840846
Total heightmm16001600
Total weightkg146151
Min heightmm5050
Max heightmm12501250
fork outer widthmm550556
fork inner widthmm230236
Capacitykg300500
Load center—400400
Max lifting speed—mm/sec 60/80 60
Max lower speed—mm/min 80 60
Lifting motor—36V400W36V400W
Lion-Battery—36V15AH36V20AH
Battery weightkg22
Input charger—220V220V
12V/24V—12V24V
front wheel basemm400400
Back wheel basemm730730
Front wheel sizemmΦ75x46Φ75x46
Steering wheelmmΦ125x48Φ125x48
Turning radiusmm10201020
Request price Datasheet (print / save as PDF) Ask about voltage

Gallery

Product photographs

All detail images published for this model.

What this model is built to do

Self-lift stacker 300kgs/500kgs/1000kgs Self-lift stacker 300kgs/500kgs/1000kgs, part of the Stackers and order pickers line.

Walk-behind, ride-on and semi-electric stackers plus order picking platform trucks.

Walk-behind pallet lifting

Published figures for this build: rated capacity 300 500 kg, turning radius 1020 1020 mm.

Straddle legs carry the mast forward for a much narrower aisle.

Straddle legs carry the mast forward for a much narrower aisle.

Walk-behind and stand-on stackers put loads straight onto racking.

Stackers keep the pallet close to the legs while lifting at height.

Check closed mast or chassis height against the lowest door on the route. Note cold store, outdoor gradient or container entry as a constraint.

Specification walk-through

The specification sheet records Model: ESL30 / ESL50; Lifting type: Electric / Electric; Moving type: Manual / Manual; Total length (mm): 1410 / 1410; Total width (mm): 840 / 846; Total height (mm): 1600 / 1600.

The specification sheet records Total weight (kg): 146 / 151; Min height (mm): 50 / 50; Max height (mm): 1250 / 1250; fork outer width (mm): 550 / 556; fork inner width (mm): 230 / 236; Capacity (kg): 300 / 500.

The specification sheet records Load center: 400 / 400; Max lifting speed: mm/sec 60/80 60; Max lower speed: mm/min 80 60; Lifting motor: 36V400W / 36V400W; Lion-Battery: 36V15AH / 36V20AH; Battery weight (kg): 2 / 2.

The specification sheet records Input charger: 220V / 220V; 12V/24V: 12V / 24V; front wheel base (mm): 400 / 400; Back wheel base (mm): 730 / 730; Front wheel size (mm): Φ75x46 / Φ75x46; Steering wheel (mm): Φ125x48 / Φ125x48.

The specification sheet records Turning radius (mm): 1020 / 1020.

An em dash marks a value the source record did not publish.

Those missing values can be requested directly through the enquiry form.

Options and attachments are listed separately from the base chassis.

Rated figures apply at the standard load centre unless a row says otherwise.

How to specify the right build

Configuration follows the load, working height and site layout.

The listed figures follow the record; options are confirmed on the quotation.

Door and beam heights decide which mast will clear the route.

Check the chassis width against the aisle and the container door.

Check the machine weight against floor loading where the site is raised.

Compare capacity first, then the lift height the job actually needs.

Match the power arrangement to the shifts and the working environment.

  • State the shifts per day so the power arrangement can be sized properly.
  • Note any constraint: low door, narrow aisle, cold store, outdoor gradient or entry.
  • Send those figures with the model code; the reply confirms whether the chassis suits.

Site preparation and operating notes

On the Self-lift stacker 300kgs/500kgs/1000kgs, measure the pallet footprint and the heaviest single load before comparing models.

Send photographs of the racking and the existing working area when possible.

On the Self-lift stacker 300kgs/500kgs/1000kgs, list the attachments required, such as clamps, sideshift or rotator.

State the shifts per day so the power arrangement can be sized properly.

On the Self-lift stacker 300kgs/500kgs/1000kgs, note any slope, threshold or step along the working route.

Operation and routine checks

On the Self-lift stacker 300kgs/500kgs/1000kgs, attachments are secured before the machine leaves the station.

Routine checks cover tyres, brakes, controls and visible leaks.

On the Self-lift stacker 300kgs/500kgs/1000kgs, the working area is kept clear of loose packaging and obstacles.

The operator checks load stability before each lift or move.

How this model fits the operation

On the Self-lift stacker 300kgs/500kgs/1000kgs, the receiving side pairs it with a dock ramp or platform where needed.

The layout drawing shows where each machine sits in the operation.

On the Self-lift stacker 300kgs/500kgs/1000kgs, spare parts for wear items follow the parts manual after delivery.

This machine usually works alongside pallet trucks and stacking equipment.

Working conditions and honest limits

On the Self-lift stacker 300kgs/500kgs/1000kgs, site conditions such as gradient, dust and moisture belong in the enquiry.

The signed datasheet issued with the quotation is the binding version.

On the Self-lift stacker 300kgs/500kgs/1000kgs, dimensions are checked against the source record before quoting.

Any option not listed should be confirmed in writing before order.

Delivery, documents and support

On the Self-lift stacker 300kgs/500kgs/1000kgs, the enquiry should include the quantity and destination port.

Wear parts are supplied after delivery against the parts manual.

On the Self-lift stacker 300kgs/500kgs/1000kgs, quote the serial number and component name when ordering spares.

Documents issued for an order are listed in the quotation.

Test and conformity documents follow the model and destination market.

Ask for the specific certificate required for your target country.

The parts manual lists the wear items and their reference views.

Before you order

  • Compare the published capacity against the heaviest single move before the mast or attachment is chosen.
  • Measure the lowered chassis and mast height against the lowest door and the container door on the planned route.
  • Attachment options are confirmed on the quotation; their weight and width are counted against the residual capacity.
  • The certificate set for an order follows the destination market; ISO factory certificates and the serial list ship with the consignment.
  • Spare parts follow the parts manual supplied with the machine; quote the serial number and component name when ordering wear parts.

Questions

Questions buyers ask before ordering

What load centre applies to the rating?+

The specification lists a load centre of 400. Loads carried farther forward reduce rated capacity.

What aisle width does it need?+

The listed turning radius is 1020. Aisle width also depends on pallet depth and fork length.

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

What does the price depend on?+

Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.

What is the minimum order quantity?+

The minimum order quantity is one set, and mixed models can be combined in one container.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Stackers and order pickers related models

ModelCapacityLiftPowerTypical use
PWSR500 kg——Narrow-aisle put-away
WSR1000 kg——Walk-behind pallet lifting
CTY-A—1600—Low-level pallet stacking
CTY-D—1600—Narrow-aisle put-away
CTY-E—1600—Walk-behind pallet lifting

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.