Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

TF15 TF20 TF25 — reach stacker

TF15 TF20 TF25 Reach Stacker, lift height 3000. Walk-behind and stand-on stackers put loads straight onto racking.

TF15 TF20 TF25 reach stacker — product photo 1 of 2

Ordering facts for the TF15 TF20 TF25

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

TF15 TF20 TF25 specification

Values are copied from the source record in their original order and units.

TF15 TF20 TF25 specification table
ParameterValue
ModelTFD15-30 / TFD20-30 / TFD25-30
Rated Capacity1500 / 2000 / 2500
Operate TypeStand-on
Max. Lifting Height3000
Min. Turning Radius1625 / 1965
Min. Stacking Aisle---mm2622 / 2895
Max Travel Speed km/h-laden/unladen7.5/8.5 / 7.0/8.0
Load center MM500
Fork Dimensions-L/W/T---mm---8.1070*100*35 / 1070*100*45
Max. Gradeability ---%10
Lifting Speed (MM/S)-laden/unladen117/243 / 110/243
Overall Length2266 / 2468
Overall Width1098 / 1258
Height-Overhead guard--mm2320
Height---Mast Lowered2080 / 2084
Height-Mast Extended w/ Load-Backrest -mm3885 / 3875
Height--Free Lift --mm100
Tilt Angle----Upward/Downward--deg.3/5
Fork Spread Range220-662 / 247-780
Reach Stroke560 / 685
Min Ground Clearance--mm80
Wheel TypePolyurethane Solid Tyre
Driving WheelΦ343×108
Balance WheelΦ180×76
Front WheelΦ267×114
Battery V/AH- "TONGBA"BRAND48V /300 AH / 48V/400 AH
Service BrakeMECH.
Parking BrakeMECH.
Charger-Intelligent48V/40A / 48V/50A
Driving Motor5.5 (AC) / 5.5(AC)
Lifting Motor6.3 / 7.5
TF10TF20
DuplexNo / 3500 / 2330 / 100 / 1200 / 1600
40002580 / 100 / 1000 / 1300
TriplexYes / 5000 / 2344 / 1740 / 900 / 1100
55002514 / 1900 / 800 / 1000
60002679 / 2090 / 700 / 9000
65002844 / 2305 / 600 / 8000
72003090 / 2600 / 500 / 700
Request price Datasheet (print / save as PDF) Ask about voltage

Gallery

Product photographs

All detail images published for this model.

What this model is built to do

TF15 TF20 TF25 Reach Stacker, part of the Reach stackers line.

Reach stackers and straddle trucks that store loads deep in narrow-aisle racking.

Order picking at height

Published figures for this build: rated capacity 1500 / 2000 / 2500, lift height 3000, overall width 1098 / 1258, turning radius 1625 / 1965.

This class handles put-away and retrieval on pallet racking.

Walk-behind and stand-on stackers put loads straight onto racking.

The walk-behind model leaves the operator free to guide each load.

Stackers work in narrow aisles where a counterbalance truck will not turn.

Confirm the charger voltage or fuel type for your destination country. Compare rated capacity against the heaviest single load you move.

Specification walk-through

The specification sheet records Model: TFD15-30 / TFD20-30 / TFD25-30; Rated Capacity (KG): 1500 / 2000 / 2500; Operate Type: Stand-on; Max. Lifting Height (MM): 3000; Min. Turning Radius (MM): 1625 / 1965; Min. Stacking Aisle---mm (1000*1000 Pallet): 2622 / 2895.

The specification sheet records Max Travel Speed km/h-laden/unladen: 7.5/8.5 / 7.0/8.0; Load center MM: 500; Fork Dimensions-L/W/T---mm---8.: 1070*100*35 / 1070*100*45; Max. Gradeability ---%: 10; Lifting Speed (MM/S)-laden/unladen: 117/243 / 110/243; Overall Length (MM): 2266 / 2468.

The specification sheet records Overall Width (MM): 1098 / 1258; Height-Overhead guard--mm: 2320; Height---Mast Lowered (MM): 2080 / 2084; Height-Mast Extended w/ Load-Backrest -mm: 3885 / 3875; Height--Free Lift --mm: 100; Tilt Angle----Upward/Downward--deg.: 3/5.

The specification sheet records Fork Spread Range (MM): 220-662 / 247-780; Reach Stroke: 560 / 685; Min Ground Clearance--mm: 80; Wheel Type: Polyurethane Solid Tyre; Driving Wheel (MM): Φ343×108; Balance Wheel (MM): Φ180×76.

The specification sheet records Front Wheel (MM): Φ267×114; Battery V/AH- "TONGBA"BRAND (ah): 48V /300 AH / 48V/400 AH; Service Brake: MECH.; Parking Brake: MECH.; Charger-Intelligent: 48V/40A / 48V/50A; Driving Motor (KW): 5.5 (AC) / 5.5(AC).

The specification sheet records Lifting Motor (KW): 6.3 / 7.5; TF10: TF20; Duplex: No / 3500 / 2330 / 100 / 1200 / 1600; 4000: 2580 / 100 / 1000 / 1300; Triplex: Yes / 5000 / 2344 / 1740 / 900 / 1100; 5500: 2514 / 1900 / 800 / 1000.

The specification sheet records 6000: 2679 / 2090 / 700 / 9000; 6500: 2844 / 2305 / 600 / 8000; 7200: 3090 / 2600 / 500 / 700.

An em dash marks a value the source record did not publish.

Those missing values can be requested directly through the enquiry form.

Units are copied as published; convert them only when comparing models.

Rated figures apply at the standard load centre unless a row says otherwise.

How to specify the right build

Configuration follows the load, working height and site layout.

The listed figures follow the record; options are confirmed on the quotation.

The enquiry should list any attachment the job requires.

Check the machine weight against floor loading where the site is raised.

Compare the lowered height against the lowest door on the route.

Review the tyre type against the surface the machine will run on.

List the models that clear each constraint before asking for a quote.

  • List the load per move, lift height and floor surface before comparing models.
  • Send those figures with the model code; the reply confirms whether the chassis suits.
  • List attachments such as clamps, sideshift or rotator separately.

Site preparation and operating notes

On the TF15 TF20 TF25, measure the pallet footprint and the heaviest single load before comparing models.

Mark the stations where loads are picked up and dropped off each shift.

On the TF15 TF20 TF25, keep the charging or refuelling position clear of the main traffic aisle.

List the attachments required, such as clamps, sideshift or rotator.

On the TF15 TF20 TF25, note any slope, threshold or step along the working route.

Operation and routine checks

On the TF15 TF20 TF25, routine checks cover tyres, brakes, controls and visible leaks.

The working area is kept clear of loose packaging and obstacles.

On the TF15 TF20 TF25, the operator follows the rated capacity marked on the chassis.

Battery or fuel levels are checked at the start of each shift.

How this model fits the operation

On the TF15 TF20 TF25, storage cages and racking organise the loads it moves between stations.

A mixed enquiry can list this model together with other families.

On the TF15 TF20 TF25, this machine usually works alongside pallet trucks and stacking equipment.

Attachments such as clamps or rotators are matched to the load shape.

Working conditions and honest limits

On the TF15 TF20 TF25, attachments are quoted separately once the base chassis is fixed.

Dimensions are checked against the source record before quoting.

On the TF15 TF20 TF25, the signed datasheet issued with the quotation is the binding version.

Capacity above the rated lift height follows the mast curve.

Delivery, documents and support

On the TF15 TF20 TF25, quotations follow the model, listed specification and destination port.

Quote the serial number and component name when ordering spares.

On the TF15 TF20 TF25, the operation and parts material travel with the machine.

The booking reference is issued with the proforma invoice.

The parts manual lists the wear items and their reference views.

Ask for the specific certificate required for your target country.

The operation material covers controls, checks and routine service points.

Before you order

  • Capacity shown is the rated figure at the stated load centre; above the rated lift height the capacity follows the mast curve.
  • Check overall width and turning space against the aisle and any narrow doorway before the chassis is shortlisted.
  • Any clamp, sideshift or rotator changes the load centre and must be listed alongside the base model.
  • CE or GS documentation where applicable is listed in the quotation together with the factory quality certificates.
  • Spare parts follow the parts manual supplied with the machine; quote the serial number and component name when ordering wear parts.

Questions

Questions buyers ask before ordering

What lift height is available?+

The specification sheet lists 3000 for this build. Send the rack beam and door heights together to size the mast.

What load centre applies to the rating?+

The specification lists a load centre of 500. Loads carried farther forward reduce rated capacity.

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

What does the price depend on?+

Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.

What is the minimum order quantity?+

The minimum order quantity is one set, and mixed models can be combined in one container.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Reach stackers related models

ModelCapacityLiftPowerTypical use
WSL———Low-level pallet stacking
WSDL1300 kg2250 mm—Aisle stacking duties
CQD20H2000 kg—ElectricPallet stacking to racking
CQD10M——ElectricWalk-behind pallet lifting
CQD10L——ElectricPallet stacking to racking

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.