Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

CQD20H — reach stacker

CQD20H Reach Stacker, rated capacity 2000 kg, electric. Walk-behind and stand-on stackers put loads straight onto racking.

CQD20H reach stacker — product photo 1 of 1
Why buyers pick this class Full specification →

Ordering facts for the CQD20H

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

CQD20H specification

Values are copied from the source record in their original order and units.

CQD20H specification table
ParameterValue
FeaturesModel / CQD20H
Drirve:electric,diesel pertol,fuel gaselectric
Operator typeseated
Load capacity/rated load/ 2000
Load centre distance/ 500
Load distance,centre of drive axle to fork/ 380
Wheelbase/ 1500
WeightService weight / kg / 4100 / 4150 / 4240
Axle loading,unladen front/rear2500/1600 / 2540/1610 / 2580/1660 kg
Axle loading,fork advanced,laden front/rear673/5427 / 714/5436 / 786/5454 kg
Axle loading,fork retracted,laden front/rear2266/3834 / 2305/3845 / 2346/3894 kg
Wheel ChassisTyre / polyurethane
Tyre size,front406
Tyre size rear340
Wheels,number front rear2,1
Thread,rear/ 1324
SizeTilt of mast/fork carriage forward/backward / α,β (Grad) / 3,5
Height,mast lowered/ 3390 / 3590 / 3890
Free lift/ 2700 / 2900 / 3200
Lift/ 8000 / 8600 / 9500
Height,mast extended/ 8800 / 9400 / 10300
Height of overhead guard/ 2200
Seat height/stand height/ 1068
Height of crura/ 270
Overall length/ 2440
Length/ 1950
Overall width/ 1450
Fork dimensionss/e/l(mm) / 50/100/1070
Fork carriage DIN 15173,class/type A,BA
Fork-carriage width/ 928
Distance between fork-arms/ 780
Distance between support arms/loading surfaces/ 1090
Reach distance/ 600
Ground clearance,laden,below mast/ 90
Ground clearance,centre of wheelbase/ 80
Aisle width for pallets 1000x1200 crossways/ 2800
Aisle width for pallets 800x1200 lengthways/ 2700
Turning radius/ 1820
Lift speed,laden/unladenm/s / 0.19/0.2
Lowering speed,laden/unladenm/s / 0.5/0.4
Reaching speed,laden/unladenm/s / 0.1/0.1
Gradeability,laden/unladen10,12
Max.gradeability,laden/unladen12,15
Acceleration time,laden/unladens / 4.8,4.3
Service brakeHydraulic
MotorDrive motor rating S2 60 min / kW / 4
Lift motor rating at S3 15%8.2 kW
Battery voltage,nominal capacity K5/ 48/500
Battery weight860 kg
Battery dimensions l/w/h1220X350X750 mm
additional dataOperating pressure for attachments / bar / 170
Sound level at the driver"s ear acc.to DIN 12053/ 70
Request price Datasheet (print / save as PDF) Ask about voltage

What this model is built to do

CQD20H Reach Stacker, part of the Reach stackers line.

Reach stackers and straddle trucks that store loads deep in narrow-aisle racking.

Pallet stacking to racking

Published figures for this build: rated capacity / 2000, overall width / 1450, turning radius / 2800, tyre 406.

This class handles put-away and retrieval on pallet racking.

The walk-behind model leaves the operator free to guide each load.

Stackers work in narrow aisles where a counterbalance truck will not turn.

The walk-behind model leaves the operator free to guide each load.

Confirm the aisle width against the pallet depth before choosing a chassis. Note cold store, outdoor gradient or container entry as a constraint.

Specification walk-through

The specification sheet records Features: Model / CQD20H; Drirve:electric,diesel pertol,fuel gas: electric; Operator type: seated; Load capacity/rated load (kg): / 2000; Load centre distance (mm): / 500; Load distance,centre of drive axle to fork (mm): / 380.

The specification sheet records Wheelbase (mm): / 1500; Weight: Service weight / kg / 4100 / 4150 / 4240; Axle loading,unladen front/rear (kg): 2500/1600 / 2540/1610 / 2580/1660 kg; Axle loading,fork advanced,laden front/rear (kg): 673/5427 / 714/5436 / 786/5454 kg; Axle loading,fork retracted,laden front/rear (kg): 2266/3834 / 2305/3845 / 2346/3894 kg; Wheel Chassis: Tyre / polyurethane.

The specification sheet records Tyre size,front: 406; Tyre size rear: 340; Wheels,number front rear (x=driven wheels): 2,1; Tread,front (mm) is not published in the source record; Thread,rear (mm): / 1324; Size: Tilt of mast/fork carriage forward/backward / α,β (Grad) / 3,5.

The specification sheet records Height,mast lowered (mm): / 3390 / 3590 / 3890; Free lift (mm): / 2700 / 2900 / 3200; Lift (mm): / 8000 / 8600 / 9500; Height,mast extended (mm): / 8800 / 9400 / 10300; Height of overhead guard (cabin): / 2200; Seat height/stand height (mm): / 1068.

The specification sheet records Height of crura (mm): / 270; Overall length (mm): / 2440; Length (barring fork): / 1950; Overall width (mm): / 1450; Fork dimensions: s/e/l(mm) / 50/100/1070; Fork carriage DIN 15173,class/type A,B: A.

The specification sheet records Fork-carriage width (mm): / 928; Distance between fork-arms (mm): / 780; Distance between support arms/loading surfaces (mm): / 1090; Reach distance (mm): / 600; Ground clearance,laden,below mast (mm): / 90; Ground clearance,centre of wheelbase (mm): / 80.

The specification sheet records Aisle width for pallets 1000x1200 crossways (mm): / 2800; Aisle width for pallets 800x1200 lengthways (mm): / 2700; Turning radius (mm): / 1820; Specification: Travel speed,laden/unladen / Km/h / 8/8.3; Lift speed,laden/unladen: m/s / 0.19/0.2; Lowering speed,laden/unladen: m/s / 0.5/0.4.

The specification sheet records Reaching speed,laden/unladen: m/s / 0.1/0.1; Gradeability,laden/unladen: 10,12; Max.gradeability,laden/unladen: 12,15; Acceleration time,laden/unladen: s / 4.8,4.3; Service brake: Hydraulic; Motor: Drive motor rating S2 60 min / kW / 4.

The specification sheet records Lift motor rating at S3 15% (kw): 8.2 kW; Battery voltage,nominal capacity K5 (v/ah): / 48/500; Battery weight (kg): 860 kg; Battery dimensions l/w/h (mm): 1220X350X750 mm; additional data: Operating pressure for attachments / bar / 170; Sound level at the driver"s ear acc.to DIN 12053 (a): / 70.

Rated figures apply at the standard load centre unless a row says otherwise.

Those missing values can be requested directly through the enquiry form.

Each row in the table keeps the label and value from the source record.

Units are copied as published; convert them only when comparing models.

How to specify the right build

For an electric chassis, the main choices are battery capacity, mast type and attachment.

The enquiry should list any attachment the job requires.

Door and beam heights decide which mast will clear the route.

Review the tyre type against the surface the machine will run on.

Note any attachment that changes the load centre or the overall width.

Compare capacity first, then the lift height the job actually needs.

Check the chassis width against the aisle and the container door.

  • State the shifts per day so the power arrangement can be sized properly.
  • Note any constraint: low door, narrow aisle, cold store, outdoor gradient or entry.
  • List attachments such as clamps, sideshift or rotator separately.

Site preparation and operating notes

On the CQD20H, check the lowest door, beam height and aisle the truck has to pass through.

Describe the floor surface: sealed concrete, asphalt, gravel or packed earth.

On the CQD20H, send photographs of the racking and the existing working area when possible.

State the shifts per day so the power arrangement can be sized properly.

On the CQD20H, mark the stations where loads are picked up and dropped off each shift.

Operation and routine checks

On the CQD20H, the working area is kept clear of loose packaging and obstacles.

The operator follows the rated capacity marked on the chassis.

On the CQD20H, routine checks cover tyres, brakes, controls and visible leaks.

Unusual noise or movement is reported before further use.

How this model fits the operation

On the CQD20H, storage cages and racking organise the loads it moves between stations.

A mixed enquiry can list this model together with other families.

On the CQD20H, attachments such as clamps or rotators are matched to the load shape.

This machine usually works alongside pallet trucks and stacking equipment.

Working conditions and honest limits

On the CQD20H, site conditions such as gradient, dust and moisture belong in the enquiry.

The signed datasheet issued with the quotation is the binding version.

On the CQD20H, attachments are quoted separately once the base chassis is fixed.

Tyre choice should match the floor rather than the price list.

Delivery, documents and support

On the CQD20H, the operation and parts material travel with the machine.

Mixed equipment can be listed on one enquiry.

On the CQD20H, wear parts are supplied after delivery against the parts manual.

Quotations follow the model, listed specification and destination port.

The operation material covers controls, checks and routine service points.

The serial number identifies the build when parts are ordered later.

Test and conformity documents follow the model and destination market.

Before you order

  • The charger is matched to the destination voltage and plug, so the country and supply standard are needed before the electric set is quoted.
  • The rated load applies at the standard load centre; carrying the load farther forward reduces the figure marked on the chassis plate.
  • Measure the lowered chassis and mast height against the lowest door and the container door on the planned route.
  • Attachment options are confirmed on the quotation; their weight and width are counted against the residual capacity.
  • CE or GS documentation where applicable is listed in the quotation together with the factory quality certificates.
  • Wear parts are ordered after delivery against the parts manual, the serial number and the component name.

Container loading estimate

Published overall dimensions for this build are about 2.44 m long and 1.45 m wide.

On a standard 20GP dry-van floor that footprint allows about 2 unit(s) per layer; a 40HQ allows about 4 unit(s) per layer.

The count is a footprint estimate against standard dry-van internal dimensions, not a loading guarantee. Final blocking, bracing and stacking follow the loading plan confirmed before sealing, and this model can be combined with other families in one container where the floor allows.

The published height of about 2.2 m sits within the standard dry-van interior headroom.

Questions

Questions buyers ask before ordering

What load does the CQD20H carry?+

The listed rated capacity is 2000 kg at the standard load centre. Above the rated lift height capacity derates along the mast curve.

What power unit does it use?+

The listed power arrangement is electric. Confirm the supply voltage or fuel type for your site before ordering.

Which tyres are fitted?+

The listed tyre type is 406. Solid tyres suit sealed concrete; pneumatic tyres suit rough outdoor ground.

What load centre applies to the rating?+

The specification lists a load centre of 500. Loads carried farther forward reduce rated capacity.

What aisle width does it need?+

The listed turning radius is 1820. Aisle width also depends on pallet depth and fork length.

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Reach stackers related models

ModelCapacityLiftPowerTypical use
WSL———Low-level pallet stacking
WSDL1300 kg2250 mm—Aisle stacking duties
CQD10M——ElectricWalk-behind pallet lifting
CQD10L——ElectricPallet stacking to racking
TF15—3000—Order picking at height

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.