WSL Reach Stacker. This class handles put-away and retrieval on pallet racking.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | WSL-100/16 100/25 ,100/30 / WSL-125/16 125/25 125/30 / WSL-130/25 130/30 130/45 |
| Capacity | 1000 / 1250 / 1300 kg |
| Max.Lifting H. | 1600/2500/3000 / 2500/3000/4500 mm |
| Min Mast H | 2080/2080/2250 / 1870/2120/2245 mm |
| Lifting Motor | DC24V/1600W / DC24V/2000W / DC24V/3000W |
| Driving Motor | DC24V/900W / DC24V/1200W / DC24V/1500W |
| Forks Type | Adjustable 1070mm / 680x920mm |
| Battery | 24V/280Ah |
| Battery Charger | 24V/40Ah |
| Weight | 920/960/980 / 1600/1630/1700 kg |
WSL Reach Stacker, part of the Reach stackers line.
Reach stackers and straddle trucks that store loads deep in narrow-aisle racking.
Low-level pallet stacking
Published figures for this build: rated capacity 1000 / 1250 / 1300 kg.
Stackers work in narrow aisles where a counterbalance truck will not turn.
Walk-behind and stand-on stackers put loads straight onto racking.
Straddle legs carry the mast forward for a much narrower aisle.
This class handles put-away and retrieval on pallet racking.
Confirm the aisle width against the pallet depth before choosing a chassis. State any attachment required alongside the base model.
The specification sheet records Model: WSL-100/16 100/25 ,100/30 / WSL-125/16 125/25 125/30 / WSL-130/25 130/30 130/45; Capacity (kg): 1000 / 1250 / 1300 kg; Max.Lifting H. (mm): 1600/2500/3000 / 2500/3000/4500 mm; Min Mast H (mm): 2080/2080/2250 / 1870/2120/2245 mm; Lifting Motor: DC24V/1600W / DC24V/2000W / DC24V/3000W; Driving Motor: DC24V/900W / DC24V/1200W / DC24V/1500W.
The specification sheet records Forks Type: Adjustable 1070mm / 680x920mm; Battery: 24V/280Ah; Battery Charger: 24V/40Ah; Weight (kg): 920/960/980 / 1600/1630/1700 kg.
Those missing values can be requested directly through the enquiry form.
Rated figures apply at the standard load centre unless a row says otherwise.
An em dash marks a value the source record did not publish.
Units are copied as published; convert them only when comparing models.
Configuration follows the load, working height and site layout.
Dimensions in the table come from the source record.
The enquiry should list any attachment the job requires.
Compare the lowered height against the lowest door on the route.
Match the power arrangement to the shifts and the working environment.
Note any attachment that changes the load centre or the overall width.
Check the chassis width against the aisle and the container door.
On the WSL, send photographs of the racking and the existing working area when possible.
List the attachments required, such as clamps, sideshift or rotator.
On the WSL, note any slope, threshold or step along the working route.
Describe the floor surface: sealed concrete, asphalt, gravel or packed earth.
On the WSL, mark the stations where loads are picked up and dropped off each shift.
On the WSL, attachments are secured before the machine leaves the station.
Routine checks cover tyres, brakes, controls and visible leaks.
On the WSL, battery or fuel levels are checked at the start of each shift.
The operator follows the rated capacity marked on the chassis.
On the WSL, attachments such as clamps or rotators are matched to the load shape.
A mixed enquiry can list this model together with other families.
On the WSL, the receiving side pairs it with a dock ramp or platform where needed.
Spare parts for wear items follow the parts manual after delivery.
On the WSL, dimensions are checked against the source record before quoting.
Attachments are quoted separately once the base chassis is fixed.
On the WSL, the specification sheet is the binding reference for listed values.
The signed datasheet issued with the quotation is the binding version.
On the WSL, mixed equipment can be listed on one enquiry.
Quotations follow the model, listed specification and destination port.
On the WSL, wear parts are supplied after delivery against the parts manual.
Quote the serial number and component name when ordering spares.
The operation material covers controls, checks and routine service points.
Test and conformity documents follow the model and destination market.
Ask for the specific certificate required for your target country.
Questions
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.