Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

CQD10L CQD15L — reach stacker

CQD10L CQD15L Reach Stacker, electric. The walk-behind model leaves the operator free to guide each load.

CQD10L CQD15L reach stacker — product photo 1 of 1
Key published figures Full specification →

Ordering facts for the CQD10L CQD15L

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

CQD10L CQD15L specification

Values are copied from the source record in their original order and units.

CQD10L CQD15L specification table
ParameterValue
ModelCQD 10L / CQD 15L
Powerelectric
Operator typestanding
Capacity distance/ 1000 / 1500
Lift height/ 3000 / 5000 / 6200
Load centre distance/ 500
Load distance,centre of driva axie to fork/ 360 / 320 / 390
Wheelbase/ 1380 / 1500
Service weight2140 / 2540 / 2640 / 2340 / 2740 / 2840 kg
Axle loading,unladen front/rear1660/1180 kg
Tyres typePU wheel
Drive wheelφ280x100 mm
Fork wheelφ250x80 mm
Wheels,number front,rear3.2
Tread,front/ 660
Tread,rear/ 896
Tilt of mast/fork carriage forward/backwardαβ(Grad) / 3,5(mast) / 3,5(forks)
Height,mast lowered/ 2086 / 2240 / 2640
Free lift/ 1700 / 2100
Height,mast extended/ 3800 / 5800 / 7000
Height of overhead guard/ 2200
stand height/ 295
Height of crura/ 270
Overall length/ 2360
Length/ 1800
Overall width/ 1020
Fork dimensionss/e/l(mm) / 36/100/1070
Fork carriage DIN15713,class/rype A,BA
Fork-carriage width/ 660
Distance between fork-arms/ 630
Distance between support arms/loading surfaces/ 688
Recah distance/ 600
Ground clearance,laden,below mast/ 90
Ground clearance,centre of wheelbase/ 80
Aisle width for pallets 1000x1200 crossways/ 2800
Aisle width for pallets 800x1200 lengthways/ 2700
Turning radius/ 1700
Travel speed,laden/unladen7/7.2
Lift speed,laden/unladenm/s / 0.19/0.2
Lowering speed,laden/unladenm/s / 0.5/0.4
Reaching speed,laden/unladenm/s / 0.1/0.1
Gradeability,laden/unladen10,12
Acceleration time,laden/unladens / 3/4 / 3/5
Service brakemechanical
Drive motor rating S2 60 min2.2 KW
Lift motor rating at S3 15%5 / 8.2 KW
Battery voltage,nominal capacity K5/ 48/400
Battery weight550 kg
Battery dimensions l/w/h960x400x590 mm
Type of drive controlDC/AC
Operating pressure for attchmentsbar / 100 / 120 / 140 / 150
Sound level at the driver's ear acc.to DIN 12053/ 70
Request price Datasheet (print / save as PDF) Ask about voltage

What this model is built to do

CQD10L CQD15L Reach Stacker, part of the Reach stackers line.

Reach stackers and straddle trucks that store loads deep in narrow-aisle racking.

Pallet stacking to racking

Published figures for this build: rated capacity / 1000 / 1500, lift height / 3000 / 5000 / 6200, overall width / 1020, turning radius / 2800, tyre pu wheel.

Stackers work in narrow aisles where a counterbalance truck will not turn.

Stackers work in narrow aisles where a counterbalance truck will not turn.

Stackers keep the pallet close to the legs while lifting at height.

The walk-behind model leaves the operator free to guide each load.

Note cold store, outdoor gradient or container entry as a constraint. Match the tyre type to the floor surface rather than the price list.

Specification walk-through

The specification sheet records Model: CQD 10L / CQD 15L; Power: electric; Operator type: standing; Capacity distance (kg): / 1000 / 1500; Lift height (mm): / 3000 / 5000 / 6200; Load centre distance (mm): / 500.

The specification sheet records Load distance,centre of driva axie to fork (mm): / 360 / 320 / 390; Wheelbase (mm): / 1380 / 1500; Service weight (kg): 2140 / 2540 / 2640 / 2340 / 2740 / 2840 kg; Axle loading,unladen front/rear (kg): 1660/1180 kg; Tyres type: PU wheel; Drive wheel (mm): φ280x100 mm.

The specification sheet records Fork wheel (mm): φ250x80 mm; Wheels,number front,rear (x=driven wheels): 3.2; Tread,front (mm): / 660; Tread,rear (mm): / 896; Tilt of mast/fork carriage forward/backward: αβ(Grad) / 3,5(mast) / 3,5(forks); Height,mast lowered (mm): / 2086 / 2240 / 2640.

The specification sheet records Free lift (mm): / 1700 / 2100; Height,mast extended (mm): / 3800 / 5800 / 7000; Height of overhead guard (cabin): / 2200; stand height (mm): / 295; Height of crura (mm): / 270; Overall length (mm): / 2360.

The specification sheet records Length (barring fork): / 1800; Overall width (mm): / 1020; Fork dimensions: s/e/l(mm) / 36/100/1070; Fork carriage DIN15713,class/rype A,B: A; Fork-carriage width (mm): / 660; Distance between fork-arms (mm): / 630.

The specification sheet records Distance between support arms/loading surfaces (mm): / 688; Recah distance (mm): / 600; Ground clearance,laden,below mast (mm): / 90; Ground clearance,centre of wheelbase (mm): / 80; Aisle width for pallets 1000x1200 crossways (mm): / 2800; Aisle width for pallets 800x1200 lengthways (mm): / 2700.

The specification sheet records Turning radius (mm): / 1700; Travel speed,laden/unladen (km/h): 7/7.2; Lift speed,laden/unladen: m/s / 0.19/0.2; Lowering speed,laden/unladen: m/s / 0.5/0.4; Reaching speed,laden/unladen: m/s / 0.1/0.1; Gradeability,laden/unladen: 10,12.

The specification sheet records Acceleration time,laden/unladen: s / 3/4 / 3/5; Service brake: mechanical; Drive motor rating S2 60 min (kw): 2.2 KW; Lift motor rating at S3 15% (kw): 5 / 8.2 KW; Battery voltage,nominal capacity K5 (v/ah): / 48/400; Battery weight (kg): 550 kg.

The specification sheet records Battery dimensions l/w/h (mm): 960x400x590 mm; Type of drive control: DC/AC; Operating pressure for attchments: bar / 100 / 120 / 140 / 150; Sound level at the driver's ear acc.to DIN 12053 (a): / 70.

Each row in the table keeps the label and value from the source record.

Those missing values can be requested directly through the enquiry form.

Rated figures apply at the standard load centre unless a row says otherwise.

Options and attachments are listed separately from the base chassis.

How to specify the right build

For an electric chassis, the main choices are battery capacity, mast type and attachment.

The listed figures follow the record; options are confirmed on the quotation.

Send pallet size, door height and aisle width with the enquiry.

Compare capacity first, then the lift height the job actually needs.

Check the machine weight against floor loading where the site is raised.

Match the power arrangement to the shifts and the working environment.

List the models that clear each constraint before asking for a quote.

  • State the shifts per day so the power arrangement can be sized properly.
  • List the load per move, lift height and floor surface before comparing models.
  • Mark the stations where loads are picked up and dropped off each shift.

Site preparation and operating notes

On the CQD10L CQD15L, note any slope, threshold or step along the working route.

Mark the stations where loads are picked up and dropped off each shift.

On the CQD10L CQD15L, check headroom under beams, pipes and door frames along the route.

State the shifts per day so the power arrangement can be sized properly.

On the CQD10L CQD15L, list the attachments required, such as clamps, sideshift or rotator.

Operation and routine checks

On the CQD10L CQD15L, the operator checks load stability before each lift or move.

The operator follows the rated capacity marked on the chassis.

On the CQD10L CQD15L, unusual noise or movement is reported before further use.

Battery or fuel levels are checked at the start of each shift.

How this model fits the operation

On the CQD10L CQD15L, a mixed enquiry can list this model together with other families.

This machine usually works alongside pallet trucks and stacking equipment.

On the CQD10L CQD15L, storage cages and racking organise the loads it moves between stations.

Related models in the same group are listed on the family page.

Working conditions and honest limits

On the CQD10L CQD15L, the signed datasheet issued with the quotation is the binding version.

Attachments are quoted separately once the base chassis is fixed.

On the CQD10L CQD15L, tyre choice should match the floor rather than the price list.

The specification sheet is the binding reference for listed values.

Delivery, documents and support

On the CQD10L CQD15L, quotations follow the model, listed specification and destination port.

The operation and parts material travel with the machine.

On the CQD10L CQD15L, packing follows sea-freight practice for the chosen chassis.

Wear parts are supplied after delivery against the parts manual.

Test and conformity documents follow the model and destination market.

The parts manual lists the wear items and their reference views.

Ask for the specific certificate required for your target country.

Before you order

  • The charger is matched to the destination voltage and plug, so the country and supply standard are needed before the electric set is quoted.
  • Capacity shown is the rated figure at the stated load centre; above the rated lift height the capacity follows the mast curve.
  • Dimensions in the specification come from the source record — check them against the container door, the lowest door on the route and the aisle before ordering.
  • Attachment options are confirmed on the quotation; their weight and width are counted against the residual capacity.
  • The certificate set for an order follows the destination market; ISO factory certificates and the serial list ship with the consignment.
  • Spare parts follow the parts manual supplied with the machine; quote the serial number and component name when ordering wear parts.

Container loading estimate

Published overall dimensions for this build are about 2.36 m long and 1.02 m wide.

On a standard 20GP dry-van floor that footprint allows about 4 unit(s) per layer; a 40HQ allows about 10 unit(s) per layer.

The count is a footprint estimate against standard dry-van internal dimensions, not a loading guarantee. Final blocking, bracing and stacking follow the loading plan confirmed before sealing, and this model can be combined with other families in one container where the floor allows.

The published height of about 2.2 m sits within the standard dry-van interior headroom.

Questions

Questions buyers ask before ordering

What power unit does it use?+

The listed power arrangement is electric. Confirm the supply voltage or fuel type for your site before ordering.

Which tyres are fitted?+

The listed tyre type is PU wheel. Solid tyres suit sealed concrete; pneumatic tyres suit rough outdoor ground.

What load centre applies to the rating?+

The specification lists a load centre of 500. Loads carried farther forward reduce rated capacity.

What aisle width does it need?+

The listed turning radius is 1700. Aisle width also depends on pallet depth and fork length.

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Reach stackers related models

ModelCapacityLiftPowerTypical use
WSL———Low-level pallet stacking
WSDL1300 kg2250 mm—Aisle stacking duties
CQD20H2000 kg—ElectricPallet stacking to racking
CQD10M——ElectricWalk-behind pallet lifting
TF15—3000—Order picking at height

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.