Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

OPS15 — stacker

OPS15 Order Picker, rated capacity 1500 kg. This class handles put-away and retrieval on pallet racking.

OPS15 stacker — product photo 1 of 2
Why buyers pick this class Full specification →

Ordering facts for the OPS15

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

OPS15 specification

Values are copied from the source record in their original order and units.

OPS15 specification table
ParameterValue
ModelOPS15
Drive typeBattery
Load capacity/rated load/ 1500
Load centre distance/ 600
Load distance, centre of drive axle to fork/ 206
Tyre size, frontΦ310×125 mm
Tyre size, rearΦ128×73 mm
Aditional wheelsΦ150×47 mm
Wheels, number front rear1x+2/4
Height, mast lowered/ 2410/3080/3750
Max. lifting height/ 5000/7000/9000
Height , mast extended/ 7230/9230/11230
Height of platform/ 230
lowed height/ 80
Overall length/ 3200
Coupling height/ 1975
Overall widthb1/b2( (mm) / 1100/1352
Forks lengths/e/l(mm) / 45/100/1220
Width overall forks/ 530/715
Height of overhead guard/ 2290
Aisle width for pallets 1000×1200 crossways/ 1400
Aisle width for pallets 800×1200 lengthways/ 1400
Turning radius/ 1800
Travel speed, laden/unladen7.7/8
Lift speed, laden/unladenm/s / 0–0.15/0–0.28
Lowering speed, laden/unladenm/s / 0–0.28/0–0.30
Battery voltage, nominal capacity K524/770(1100)
Battery weightKg
Battery dimensions L/w/h982x397x561 mm
Service weight3870
Request price Datasheet (print / save as PDF) Ask about voltage

Gallery

Product photographs

All detail images published for this model.

What this model is built to do

OPS15 Order Picker, part of the Stackers and order pickers line.

Walk-behind, ride-on and semi-electric stackers plus order picking platform trucks.

Narrow-aisle put-away

Published figures for this build: rated capacity / 1500, overall width b1/b2( (mm) / 1100/1352, turning radius / 1400, tyre φ310×125 mm.

Stackers keep the pallet close to the legs while lifting at height.

Stackers work in narrow aisles where a counterbalance truck will not turn.

Stackers keep the pallet close to the legs while lifting at height.

Walk-behind and stand-on stackers put loads straight onto racking.

Match the tyre type to the floor surface rather than the price list. State any attachment required alongside the base model.

Specification walk-through

The specification sheet records Model: OPS15; Drive type: Battery; Load capacity/rated load (kg): / 1500; Load centre distance (mm): / 600; Load distance, centre of drive axle to fork (mm): / 206; Tyre size, front (mm): Φ310×125 mm.

The specification sheet records Tyre size, rear (mm): Φ128×73 mm; Aditional wheels (mm): Φ150×47 mm; Wheels, number front rear (x=driven wheels): 1x+2/4; Height, mast lowered (mm): / 2410/3080/3750; Max. lifting height (mm): / 5000/7000/9000; Height , mast extended (mm): / 7230/9230/11230.

The specification sheet records Height of platform (mm): / 230; lowed height (mm): / 80; Overall length (mm): / 3200; Coupling height (mm): / 1975; Overall width: b1/b2( (mm) / 1100/1352; Forks length: s/e/l(mm) / 45/100/1220.

The specification sheet records Width overall forks (mm): / 530/715; Height of overhead guard (mm): / 2290; Aisle width for pallets 1000×1200 crossways (mm): / 1400; Aisle width for pallets 800×1200 lengthways (mm): / 1400; Turning radius (mm): / 1800; Travel speed, laden/unladen (km/h): 7.7/8.

The specification sheet records Lift speed, laden/unladen: m/s / 0–0.15/0–0.28; Lowering speed, laden/unladen: m/s / 0–0.28/0–0.30; Battery voltage, nominal capacity K5 (v/ah): 24/770(1100); Battery weight (850): Kg; Battery dimensions L/w/h (mm): 982x397x561 mm; Service weight (with battery): 3870.

Options and attachments are listed separately from the base chassis.

Units are copied as published; convert them only when comparing models.

Each row in the table keeps the label and value from the source record.

Those missing values can be requested directly through the enquiry form.

How to specify the right build

Configuration follows the load, working height and site layout.

The listed figures follow the record; options are confirmed on the quotation.

Door and beam heights decide which mast will clear the route.

Match the power arrangement to the shifts and the working environment.

Compare capacity first, then the lift height the job actually needs.

Check the chassis width against the aisle and the container door.

Compare the lowered height against the lowest door on the route.

  • State the shifts per day so the power arrangement can be sized properly.
  • Send those figures with the model code; the reply confirms whether the chassis suits.
  • Mark the stations where loads are picked up and dropped off each shift.

Site preparation and operating notes

On the OPS15, send photographs of the racking and the existing working area when possible.

Measure the pallet footprint and the heaviest single load before comparing models.

On the OPS15, mark the stations where loads are picked up and dropped off each shift.

List the attachments required, such as clamps, sideshift or rotator.

On the OPS15, state the shifts per day so the power arrangement can be sized properly.

Operation and routine checks

On the OPS15, the operator checks load stability before each lift or move.

Unusual noise or movement is reported before further use.

On the OPS15, attachments are secured before the machine leaves the station.

Loads are kept low while travelling between stations.

How this model fits the operation

On the OPS15, the layout drawing shows where each machine sits in the operation.

A mixed enquiry can list this model together with other families.

On the OPS15, spare parts for wear items follow the parts manual after delivery.

Attachments such as clamps or rotators are matched to the load shape.

Working conditions and honest limits

On the OPS15, dimensions are checked against the source record before quoting.

Tyre choice should match the floor rather than the price list.

On the OPS15, the signed datasheet issued with the quotation is the binding version.

The specification sheet is the binding reference for listed values.

Delivery, documents and support

On the OPS15, the enquiry should include the quantity and destination port.

Packing follows sea-freight practice for the chosen chassis.

On the OPS15, the operation and parts material travel with the machine.

Documents issued for an order are listed in the quotation.

The operation material covers controls, checks and routine service points.

The parts manual lists the wear items and their reference views.

Ask for the specific certificate required for your target country.

Before you order

  • The rated load applies at the standard load centre; carrying the load farther forward reduces the figure marked on the chassis plate.
  • Check overall width and turning space against the aisle and any narrow doorway before the chassis is shortlisted.
  • Attachment options are confirmed on the quotation; their weight and width are counted against the residual capacity.
  • The certificate set for an order follows the destination market; ISO factory certificates and the serial list ship with the consignment.
  • Wear parts are ordered after delivery against the parts manual, the serial number and the component name.

Questions

Questions buyers ask before ordering

What load does the OPS15 carry?+

The listed rated capacity is 1500 kg at the standard load centre. Above the rated lift height capacity derates along the mast curve.

Which tyres are fitted?+

The listed tyre type is Φ310×125 mm. Solid tyres suit sealed concrete; pneumatic tyres suit rough outdoor ground.

What load centre applies to the rating?+

The specification lists a load centre of 600. Loads carried farther forward reduce rated capacity.

What aisle width does it need?+

The listed turning radius is 1800. Aisle width also depends on pallet depth and fork length.

What is the machine weight?+

The listed service or net weight is 610(850) Kg. This matters for floor loading, ramps and container plans.

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Stackers and order pickers related models

ModelCapacityLiftPowerTypical use
PWSR500 kg——Narrow-aisle put-away
WSR1000 kg——Walk-behind pallet lifting
CTY-A—1600—Low-level pallet stacking
CTY-D—1600—Narrow-aisle put-away
CTY-E—1600—Walk-behind pallet lifting

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.