Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

MHA1030 / MHA1040 / MHA1045 — stacker

MHA1030 / MHA1040 / MHA1045 Electric Stacker. Stackers work in narrow aisles where a counterbalance truck will not turn.

MHA1030 / MHA1040 / MHA1045 stacker — product photo 1 of 1

Ordering facts for the MHA1030 / MHA1040 / MHA1045

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

MHA1030 / MHA1040 / MHA1045 specification

Values are copied from the source record in their original order and units.

MHA1030 / MHA1040 / MHA1045 specification table
ParameterValue
Descriptiom Model No.MHA1030 / MHA1040 / MHA1045
Operation TypeStand-on
Rated Load Capacity1000 / 800 / 600
Load center MM450
Max Lift Height (mm)--H3000 / 4000 / 45000
Min. Road Clearance- Fork(mm)--H35
Max./Min.Height-Operation Compartment (mm)--H13205/215 / 4205/215 / 4705/215
Max./Min.Height-Overhead Guard (mm)--H25237/2247 / 6237/2247 / 6737/2247
Height-Mast Lowered (mm)-H32260 / 2760 / 3010
Height-Mast Extended (mm)-H43745 / 4745 / 5245
Min. Road Clearance (mm)-H530
Overall Length (mm)--L2536
Front Wheelbase (mm)--L11235
Rear Wheelbase (mm)--L2160
Length-Fork (mm)-L3930
Overall Width (mm)--W1080
Rear Tread (mm)--W1942
Fork Width-Outer (mm)--W2700
Fork Width-Inner (mm) --W3600
Min Turning Radius (mm)-Ra1440
Wheel TypePU
Wheel Size-Drive230*83.5
Rear Wheel150*90
Banalce Wheel-150*50
Travel Speed-Laden/Unladen-4/4.8
Lift Speed-Unladen-100
Descent Speed-Unladen-70-97
Driving MotorAC1.1
Lifting Motor3
Steering Motor0.75
Battery-V/AH24/480
Charger V/A24/70
Service Weight (with battery) KG2340 / 2440 / 2490
Request price Datasheet (print / save as PDF) Ask about voltage

What this model is built to do

MHA1030 / MHA1040 / MHA1045 Electric Stacker, part of the Stackers and order pickers line.

Walk-behind, ride-on and semi-electric stackers plus order picking platform trucks.

Walk-behind pallet lifting

Published figures for this build: rated capacity 1000 / 800 / 600, lift height 3000 / 4000 / 45000, overall width 1080, turning radius 1440.

This class handles put-away and retrieval on pallet racking.

Stackers keep the pallet close to the legs while lifting at height.

Straddle legs carry the mast forward for a much narrower aisle.

Walk-behind and stand-on stackers put loads straight onto racking.

Check closed mast or chassis height against the lowest door on the route. Describe the shifts per day when the power arrangement is selected.

Specification walk-through

The specification sheet records Descriptiom Model No.: MHA1030 / MHA1040 / MHA1045; Operation Type: Stand-on; Rated Load Capacity (KG): 1000 / 800 / 600; Load center MM: 450; Max Lift Height (mm)--H: 3000 / 4000 / 45000; Min. Road Clearance- Fork(mm)--H: 35.

The specification sheet records Max./Min.Height-Operation Compartment (mm)--H1: 3205/215 / 4205/215 / 4705/215; Max./Min.Height-Overhead Guard (mm)--H2: 5237/2247 / 6237/2247 / 6737/2247; Height-Mast Lowered (mm)-H3: 2260 / 2760 / 3010; Height-Mast Extended (mm)-H4: 3745 / 4745 / 5245; Min. Road Clearance (mm)-H5: 30; Overall Length (mm)--L: 2536.

The specification sheet records Front Wheelbase (mm)--L1: 1235; Rear Wheelbase (mm)--L2: 160; Length-Fork (mm)-L3: 930; Overall Width (mm)--W: 1080; Rear Tread (mm)--W1: 942; Fork Width-Outer (mm)--W2: 700.

The specification sheet records Fork Width-Inner (mm) --W3: 600; Min Turning Radius (mm)-Ra: 1440; Wheel Type: PU; Wheel Size-Drive (mm): 230*83.5; Rear Wheel (mm): 150*90; Banalce Wheel- (mm): 150*50.

The specification sheet records Travel Speed-Laden/Unladen- (km/h): 4/4.8; Lift Speed-Unladen- (mm/s): 100; Descent Speed-Unladen- (mm/s): 70-97; Gradeability-Laden/Unladen-% is not published in the source record; Driving Motor (KW): AC1.1; Lifting Motor (KW): 3.

The specification sheet records Steering Motor (KW): 0.75; Battery-V/AH: 24/480; Charger V/A: 24/70; Service Weight (with battery) KG: 2340 / 2440 / 2490.

Each row in the table keeps the label and value from the source record.

Those missing values can be requested directly through the enquiry form.

Units are copied as published; convert them only when comparing models.

Options and attachments are listed separately from the base chassis.

How to specify the right build

Configuration follows the load, working height and site layout.

Door and beam heights decide which mast will clear the route.

The listed figures follow the record; options are confirmed on the quotation.

Note any attachment that changes the load centre or the overall width.

Compare the lowered height against the lowest door on the route.

Match the power arrangement to the shifts and the working environment.

Check the machine weight against floor loading where the site is raised.

  • List attachments such as clamps, sideshift or rotator separately.
  • Mark the stations where loads are picked up and dropped off each shift.
  • Note any constraint: low door, narrow aisle, cold store, outdoor gradient or entry.

Site preparation and operating notes

On the MHA1030 / MHA1040 / MHA1045, check the lowest door, beam height and aisle the truck has to pass through.

Describe the floor surface: sealed concrete, asphalt, gravel or packed earth.

On the MHA1030 / MHA1040 / MHA1045, keep the charging or refuelling position clear of the main traffic aisle.

Measure the pallet footprint and the heaviest single load before comparing models.

On the MHA1030 / MHA1040 / MHA1045, send photographs of the racking and the existing working area when possible.

Operation and routine checks

On the MHA1030 / MHA1040 / MHA1045, loads are kept low while travelling between stations.

The working area is kept clear of loose packaging and obstacles.

On the MHA1030 / MHA1040 / MHA1045, routine checks cover tyres, brakes, controls and visible leaks.

Unusual noise or movement is reported before further use.

How this model fits the operation

On the MHA1030 / MHA1040 / MHA1045, the layout drawing shows where each machine sits in the operation.

Attachments such as clamps or rotators are matched to the load shape.

On the MHA1030 / MHA1040 / MHA1045, this machine usually works alongside pallet trucks and stacking equipment.

The receiving side pairs it with a dock ramp or platform where needed.

Working conditions and honest limits

On the MHA1030 / MHA1040 / MHA1045, tyre choice should match the floor rather than the price list.

The specification sheet is the binding reference for listed values.

On the MHA1030 / MHA1040 / MHA1045, capacity above the rated lift height follows the mast curve.

Any option not listed should be confirmed in writing before order.

Delivery, documents and support

On the MHA1030 / MHA1040 / MHA1045, loading is recorded before the container is sealed.

Documents issued for an order are listed in the quotation.

On the MHA1030 / MHA1040 / MHA1045, packing follows sea-freight practice for the chosen chassis.

Quote the serial number and component name when ordering spares.

Ask for the specific certificate required for your target country.

The operation material covers controls, checks and routine service points.

Test and conformity documents follow the model and destination market.

Before you order

  • Capacity shown is the rated figure at the stated load centre; above the rated lift height the capacity follows the mast curve.
  • Check overall width and turning space against the aisle and any narrow doorway before the chassis is shortlisted.
  • Attachment options are confirmed on the quotation; their weight and width are counted against the residual capacity.
  • The certificate set for an order follows the destination market; ISO factory certificates and the serial list ship with the consignment.
  • Wear parts are ordered after delivery against the parts manual, the serial number and the component name.

Container loading estimate

Published overall dimensions for this build are about 2.536 m long and 1.08 m wide.

On a standard 20GP dry-van floor that footprint allows about 4 unit(s) per layer; a 40HQ allows about 8 unit(s) per layer.

The count is a footprint estimate against standard dry-van internal dimensions, not a loading guarantee. Final blocking, bracing and stacking follow the loading plan confirmed before sealing, and this model can be combined with other families in one container where the floor allows.

Questions

Questions buyers ask before ordering

What load centre applies to the rating?+

The specification lists a load centre of 450. Loads carried farther forward reduce rated capacity.

What aisle width does it need?+

The listed turning radius is 1440. Aisle width also depends on pallet depth and fork length.

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

What does the price depend on?+

Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.

What is the minimum order quantity?+

The minimum order quantity is one set, and mixed models can be combined in one container.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Stackers and order pickers related models

ModelCapacityLiftPowerTypical use
PWSR500 kg——Narrow-aisle put-away
WSR1000 kg——Walk-behind pallet lifting
CTY-A—1600—Low-level pallet stacking
CTY-D—1600—Narrow-aisle put-away
CTY-E—1600—Walk-behind pallet lifting

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.