Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

MBD100/25 / MBD100/30 — stacker

MBD100/25 / MBD100/30 Electric Stacker, rated capacity 1000 kg, Drive Motor type / DC. This class handles put-away and retrieval on pallet racking.

MBD100/25 / MBD100/30 stacker — product photo 1 of 1
Why buyers pick this class Full specification →

Ordering facts for the MBD100/25 / MBD100/30

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

MBD100/25 / MBD100/30 specification

Values are copied from the source record in their original order and units.

MBD100/25 / MBD100/30 specification table
ParameterValue
MODELMBD100/25 / MBD100/30
StandardPower Type / Battery
Operate Typewalkie
Rated Capacity/ 1000
Load center/ 500
TyreWheel Type / Polyurethane Tyre
Front wheelΦ80×70
Rear wheelΦ210×70
Tyres No. -front/rear2/1X+1
Dimen sionMast Type / Duplex Mast
Lift Height/ 2500 / 3000
Height---Mast Lowered/ 1840 / 2090
Height-Mast Extended/ 3070 / 3570
Fork Min Ground Clearance/ 86
Overall Length/ 1750
Length to fork face/ 600
Wheel Base/ 1215
Overall Width/ 800
Tread Front/rear/ 400/525
Fork Dimensions1150*160*60 mm
Width across forks/ 560
Aisle width for pallet 1000*1200/ 2250
Aisle with for pallet 800*1200/ 2180
Trurning radius/ 1400
FunctionTravel Speed -laden/unladen / km/h / 3.5/4
Gradeability -laden/unladen3/6 %
PowerDrive Motor type / DC
Driving Motor0.65 kw
Lift motor typeDC
Lift Motor2 kw
Battery V/AH2*12 /80 / 2*12/80
WeightBattery / kg / 2*25.5
Service Weight530 / 560 kg
SteeringSteering type / Mechanical
Parking BrakeElectromagnetic
Parking Operation typeHand Operation
Service Brake typeElectromagnetic
Request price Datasheet (print / save as PDF) Ask about voltage

What this model is built to do

MBD100/25 / MBD100/30 Electric Stacker, part of the Stackers and order pickers line.

Walk-behind, ride-on and semi-electric stackers plus order picking platform trucks.

Order picking at height

Published figures for this build: rated capacity / 1000, lift height / 2500 / 3000, overall width / 800, turning radius / 2250, tyre wheel type / polyurethane tyre.

Walk-behind and stand-on stackers put loads straight onto racking.

Stackers work in narrow aisles where a counterbalance truck will not turn.

Walk-behind and stand-on stackers put loads straight onto racking.

Walk-behind and stand-on stackers put loads straight onto racking.

State any attachment required alongside the base model. Note cold store, outdoor gradient or container entry as a constraint.

Specification walk-through

The specification sheet records MODEL: MBD100/25 / MBD100/30; Standard: Power Type / Battery; Operate Type: walkie; Rated Capacity (kg): / 1000; Load center (mm): / 500; Tyre: Wheel Type / Polyurethane Tyre.

The specification sheet records Front wheel: Φ80×70; Rear wheel: Φ210×70; Tyres No. -front/rear (X=drive wheel): 2/1X+1; Dimen sion: Mast Type / Duplex Mast; Lift Height (mm): / 2500 / 3000; Height--Free Lift (mm) is not published in the source record.

The specification sheet records Height---Mast Lowered (mm): / 1840 / 2090; Height-Mast Extended (mm): / 3070 / 3570; Fork Min Ground Clearance (mm): / 86; Overall Length (mm): / 1750; Length to fork face (mm): / 600; Wheel Base (mm): / 1215.

The specification sheet records Overall Width (mm): / 800; Tread Front/rear (mm): / 400/525; Fork Dimensions (mm): 1150*160*60 mm; Width across forks (mm): / 560; Aisle width for pallet 1000*1200 (mm): / 2250; Aisle with for pallet 800*1200 (mm): / 2180.

The specification sheet records Trurning radius (mm): / 1400; Function: Travel Speed -laden/unladen / km/h / 3.5/4; Gradeability -laden/unladen (%): 3/6 %; Power: Drive Motor type / DC; Driving Motor (S2 60): 0.65 kw; Lift motor type: DC.

The specification sheet records Lift Motor (S3 15%): 2 kw; Battery V/AH (v/ah): 2*12 /80 / 2*12/80; Weight: Battery / kg / 2*25.5; Service Weight (kg): 530 / 560 kg; Steering: Steering type / Mechanical; Parking Brake: Electromagnetic.

The specification sheet records Parking Operation type: Hand Operation; Service Brake type: Electromagnetic.

An em dash marks a value the source record did not publish.

Units are copied as published; convert them only when comparing models.

Each row in the table keeps the label and value from the source record.

Options and attachments are listed separately from the base chassis.

How to specify the right build

Configuration follows the load, working height and site layout.

The enquiry should list any attachment the job requires.

Dimensions in the table come from the source record.

Check the chassis width against the aisle and the container door.

Match the power arrangement to the shifts and the working environment.

Review the tyre type against the surface the machine will run on.

Check the machine weight against floor loading where the site is raised.

  • State the shifts per day so the power arrangement can be sized properly.
  • Note any constraint: low door, narrow aisle, cold store, outdoor gradient or entry.
  • List attachments such as clamps, sideshift or rotator separately.

Site preparation and operating notes

On the MBD100/25 / MBD100/30, check the lowest door, beam height and aisle the truck has to pass through.

Describe the floor surface: sealed concrete, asphalt, gravel or packed earth.

On the MBD100/25 / MBD100/30, measure the pallet footprint and the heaviest single load before comparing models.

Check headroom under beams, pipes and door frames along the route.

On the MBD100/25 / MBD100/30, state the shifts per day so the power arrangement can be sized properly.

Operation and routine checks

On the MBD100/25 / MBD100/30, the operator follows the rated capacity marked on the chassis.

The working area is kept clear of loose packaging and obstacles.

On the MBD100/25 / MBD100/30, routine checks cover tyres, brakes, controls and visible leaks.

Battery or fuel levels are checked at the start of each shift.

How this model fits the operation

On the MBD100/25 / MBD100/30, attachments such as clamps or rotators are matched to the load shape.

The receiving side pairs it with a dock ramp or platform where needed.

On the MBD100/25 / MBD100/30, the layout drawing shows where each machine sits in the operation.

Storage cages and racking organise the loads it moves between stations.

Working conditions and honest limits

On the MBD100/25 / MBD100/30, any option not listed should be confirmed in writing before order.

Dimensions are checked against the source record before quoting.

On the MBD100/25 / MBD100/30, the specification sheet is the binding reference for listed values.

Capacity above the rated lift height follows the mast curve.

Delivery, documents and support

On the MBD100/25 / MBD100/30, documents issued for an order are listed in the quotation.

Quote the serial number and component name when ordering spares.

On the MBD100/25 / MBD100/30, wear parts are supplied after delivery against the parts manual.

Mixed equipment can be listed on one enquiry.

The operation material covers controls, checks and routine service points.

Test and conformity documents follow the model and destination market.

Ask for the specific certificate required for your target country.

Before you order

  • Capacity shown is the rated figure at the stated load centre; above the rated lift height the capacity follows the mast curve.
  • Measure the lowered chassis and mast height against the lowest door and the container door on the planned route.
  • Attachments are quoted separately once the base chassis is fixed, so the attachment weight can be counted against the residual capacity.
  • CE or GS documentation where applicable is listed in the quotation together with the factory quality certificates.
  • Spare parts follow the parts manual supplied with the machine; quote the serial number and component name when ordering wear parts.

Container loading estimate

Published overall dimensions for this build are about 1.75 m long and 0.8 m wide.

On a standard 20GP dry-van floor that footprint allows about 7 unit(s) per layer; a 40HQ allows about 15 unit(s) per layer.

The count is a footprint estimate against standard dry-van internal dimensions, not a loading guarantee. Final blocking, bracing and stacking follow the loading plan confirmed before sealing, and this model can be combined with other families in one container where the floor allows.

Questions

Questions buyers ask before ordering

What load does the MBD100/25 / MBD100/30 carry?+

The listed rated capacity is 1000 kg at the standard load centre. Above the rated lift height capacity derates along the mast curve.

What power unit does it use?+

The listed power arrangement is Drive Motor type / DC. Confirm the supply voltage or fuel type for your site before ordering.

Which tyres are fitted?+

The listed tyre type is Wheel Type / Polyurethane Tyre. Solid tyres suit sealed concrete; pneumatic tyres suit rough outdoor ground.

What load centre applies to the rating?+

The specification lists a load centre of 500. Loads carried farther forward reduce rated capacity.

What is the machine weight?+

The listed service or net weight is Battery. This matters for floor loading, ramps and container plans.

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Stackers and order pickers related models

ModelCapacityLiftPowerTypical use
PWSR500 kg——Narrow-aisle put-away
WSR1000 kg——Walk-behind pallet lifting
CTY-A—1600—Low-level pallet stacking
CTY-D—1600—Narrow-aisle put-away
CTY-E—1600—Walk-behind pallet lifting

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.