Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

LES-10D/LES-12D/LES-15D — stacker

LES-10D/LES-12D/LES-15D Electric Stacker, 1.2 kw. Walk-behind and stand-on stackers put loads straight onto racking.

LES-10D/LES-12D/LES-15D stacker — product photo 1 of 2

Ordering facts for the LES-10D/LES-12D/LES-15D

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

LES-10D/LES-12D/LES-15D specification

Values are copied from the source record in their original order and units.

LES-10D/LES-12D/LES-15D specification table
ParameterValue
ModelLES-10D/LES-12D/LES-15D
Driving styleWalkie/Rider
Load capacity Q1000/1200/1500 kg
Load center C600 mm
Overall length L11960 mm
Overall width W875 mm
Min. overall height H12050 / 1750 / 2200 / 2350 mm
Fork dimension L×b×m1150/1200×160×56 mm
Outside width of forks D560/680 mm
Ground clearance x≥30 mm
Base distance L01283 mm
Wheel materialPU
Driving wheel sizeφ250×80 mm
Front wheel sizeφ78×70 mm
Balance wheel sizeφ125×75 mm
Min. steering radius Wa1540 mm
Min. width of aisle≥2400 mm
Max. height of forks H1600 / 2500 / 3000 / 3300 / 3500 mm
Max. overall height H22070 / 2970 / 3470 / 3770 / 3970 mm
Min. height of forks H390 mm
Travel speed4.5/5.5
Lift speed90/160
Lower speed95/120
Brake typeElectromagnetic
Power of driving motor1.2 kw
Power of lift motor2.2 kw
Battery capacity/voltageAh/V / 165/24, 240/24
Weight of battery160/210 kg
Net weight610 / 690 / 705 / 720 / 735 kg
Request price Datasheet (print / save as PDF) Ask about voltage

Gallery

Product photographs

All detail images published for this model.

What this model is built to do

LES-10D/LES-12D/LES-15D Electric Stacker, part of the Stackers and order pickers line.

Walk-behind, ride-on and semi-electric stackers plus order picking platform trucks.

Order picking at height

Published figures for this build: rated capacity 1000/1200/1500 kg, overall width 875 mm, turning radius ≥2400 mm.

Straddle legs carry the mast forward for a much narrower aisle.

The walk-behind model leaves the operator free to guide each load.

Stackers work in narrow aisles where a counterbalance truck will not turn.

Stackers work in narrow aisles where a counterbalance truck will not turn.

Describe the shifts per day when the power arrangement is selected. Note cold store, outdoor gradient or container entry as a constraint.

Specification walk-through

The specification sheet records Model: LES-10D/LES-12D/LES-15D; Driving style: Walkie/Rider; Load capacity Q (kg): 1000/1200/1500 kg; Load center C (mm): 600 mm; Overall length L1 (mm): 1960 mm; Overall width W (mm): 875 mm.

The specification sheet records Min. overall height H1 (mm): 2050 / 1750 / 2200 / 2350 mm; Fork dimension L×b×m (mm): 1150/1200×160×56 mm; Outside width of forks D (mm): 560/680 mm; Ground clearance x (mm): ≥30 mm; Base distance L0 (mm): 1283 mm; Wheel material: PU.

The specification sheet records Driving wheel size (mm): φ250×80 mm; Front wheel size (mm): φ78×70 mm; Balance wheel size (mm): φ125×75 mm; Min. steering radius Wa (mm): 1540 mm; Min. width of aisle (mm): ≥2400 mm; Max. height of forks H (mm): 1600 / 2500 / 3000 / 3300 / 3500 mm.

The specification sheet records Max. overall height H2 (mm): 2070 / 2970 / 3470 / 3770 / 3970 mm; Min. height of forks H3 (mm): 90 mm; Travel speed (laden/unladen): 4.5/5.5; Lift speed (laden/unladen): 90/160; Lower speed (laden/unladen): 95/120; Brake type: Electromagnetic.

The specification sheet records Power of driving motor (kw): 1.2 kw; Power of lift motor (kw): 2.2 kw; Battery capacity/voltage: Ah/V / 165/24, 240/24; Weight of battery (kg): 160/210 kg; Net weight (without battery): 610 / 690 / 705 / 720 / 735 kg.

Options and attachments are listed separately from the base chassis.

Units are copied as published; convert them only when comparing models.

An em dash marks a value the source record did not publish.

Those missing values can be requested directly through the enquiry form.

How to specify the right build

Configuration follows the load, working height and site layout.

Door and beam heights decide which mast will clear the route.

The enquiry should list any attachment the job requires.

Check the chassis width against the aisle and the container door.

Check the machine weight against floor loading where the site is raised.

Review the tyre type against the surface the machine will run on.

Compare capacity first, then the lift height the job actually needs.

  • State the shifts per day so the power arrangement can be sized properly.
  • Note any constraint: low door, narrow aisle, cold store, outdoor gradient or entry.
  • List attachments such as clamps, sideshift or rotator separately.

Site preparation and operating notes

On the LES-10D/LES-12D/LES-15D, mark the stations where loads are picked up and dropped off each shift.

Check headroom under beams, pipes and door frames along the route.

On the LES-10D/LES-12D/LES-15D, check the lowest door, beam height and aisle the truck has to pass through.

Keep the charging or refuelling position clear of the main traffic aisle.

On the LES-10D/LES-12D/LES-15D, state the shifts per day so the power arrangement can be sized properly.

Operation and routine checks

On the LES-10D/LES-12D/LES-15D, battery or fuel levels are checked at the start of each shift.

The operator checks load stability before each lift or move.

On the LES-10D/LES-12D/LES-15D, attachments are secured before the machine leaves the station.

The operator follows the rated capacity marked on the chassis.

How this model fits the operation

On the LES-10D/LES-12D/LES-15D, spare parts for wear items follow the parts manual after delivery.

This machine usually works alongside pallet trucks and stacking equipment.

On the LES-10D/LES-12D/LES-15D, attachments such as clamps or rotators are matched to the load shape.

The receiving side pairs it with a dock ramp or platform where needed.

Working conditions and honest limits

On the LES-10D/LES-12D/LES-15D, capacity above the rated lift height follows the mast curve.

The signed datasheet issued with the quotation is the binding version.

On the LES-10D/LES-12D/LES-15D, dimensions are checked against the source record before quoting.

Tyre choice should match the floor rather than the price list.

Delivery, documents and support

On the LES-10D/LES-12D/LES-15D, the enquiry should include the quantity and destination port.

Packing follows sea-freight practice for the chosen chassis.

On the LES-10D/LES-12D/LES-15D, the booking reference is issued with the proforma invoice.

Quote the serial number and component name when ordering spares.

The serial number identifies the build when parts are ordered later.

The parts manual lists the wear items and their reference views.

The operation material covers controls, checks and routine service points.

Before you order

  • Compare the published capacity against the heaviest single move before the mast or attachment is chosen.
  • Check overall width and turning space against the aisle and any narrow doorway before the chassis is shortlisted.
  • Attachment options are confirmed on the quotation; their weight and width are counted against the residual capacity.
  • The certificate set for an order follows the destination market; ISO factory certificates and the serial list ship with the consignment.
  • The parts manual ships with the machine; identify wear items by serial number and part name when reordering.

Container loading estimate

Published overall dimensions for this build are about 1.96 m long and 0.875 m wide.

On a standard 20GP dry-van floor that footprint allows about 6 unit(s) per layer; a 40HQ allows about 13 unit(s) per layer.

The count is a footprint estimate against standard dry-van internal dimensions, not a loading guarantee. Final blocking, bracing and stacking follow the loading plan confirmed before sealing, and this model can be combined with other families in one container where the floor allows.

Questions

Questions buyers ask before ordering

What power unit does it use?+

The listed power arrangement is 1.2 kw. Confirm the supply voltage or fuel type for your site before ordering.

What load centre applies to the rating?+

The specification lists a load centre of 600 mm. Loads carried farther forward reduce rated capacity.

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

What does the price depend on?+

Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.

What is the minimum order quantity?+

The minimum order quantity is one set, and mixed models can be combined in one container.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Stackers and order pickers related models

ModelCapacityLiftPowerTypical use
PWSR500 kg——Narrow-aisle put-away
WSR1000 kg——Walk-behind pallet lifting
CTY-A—1600—Low-level pallet stacking
CTY-D—1600—Narrow-aisle put-away
CTY-E—1600—Walk-behind pallet lifting

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.