FSEP3-2.7 / FSEP3-3.3 / FSEP3-4.0 / FSEP3-4.5 Order Picker, rated capacity 300 kg. Stackers keep the pallet close to the legs while lifting at height.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model Number | FSEP3-2.7 / FSEP3-3.3 / FSEP3-4.0 / FSEP3-4.5 |
| (H)Max.Platform Height | 2700 / 3300 / 4000 / 4500 mm |
| (H1)Max.Machine Height | 4120 / 5000 / 5400 / 6000 mm |
| (H1)Ground Clearance | 40 mm |
| Lift Rated Capacity | 300 kg |
| Platform Size | 600x640 mm |
| Max.Drive Speed | 4 |
| Max.Drive Speed | 1.6 |
| Min.turning Radius | 1600 mm |
| Max.Climbing Capacity | 15~20 % |
| Driving Wheel Size | 230x80 mm |
| Caster Size | in / 6 |
| Driving Motor | 2x24/0.4 |
| Lifting Motor | 24/1.6 |
| Anerold battery | 2x12/150 |
| Charger | 24/15 |
| Overall Length | 1530 / 1620 mm |
| Overall Width | 700 mm |
| Overall Height | 1830 / 2130 / 1840 / 2000 mm |
| Overall Net Weight | 430 / 450 / 660 / 680 kg |
FSEP3-2.7 / FSEP3-3.3 / FSEP3-4.0 / FSEP3-4.5 Order Picker, part of the Stackers and order pickers line.
Walk-behind, ride-on and semi-electric stackers plus order picking platform trucks.
Low-level pallet stacking
Published figures for this build: rated capacity 300 kg, overall width 700 mm, turning radius 1600 mm.
Walk-behind and stand-on stackers put loads straight onto racking.
The walk-behind model leaves the operator free to guide each load.
Stackers work in narrow aisles where a counterbalance truck will not turn.
Stackers work in narrow aisles where a counterbalance truck will not turn.
Note cold store, outdoor gradient or container entry as a constraint. Describe the shifts per day when the power arrangement is selected.
The specification sheet records Model Number: FSEP3-2.7 / FSEP3-3.3 / FSEP3-4.0 / FSEP3-4.5; (H)Max.Platform Height (mm): 2700 / 3300 / 4000 / 4500 mm; (H1)Max.Machine Height (mm): 4120 / 5000 / 5400 / 6000 mm; (H1)Ground Clearance (mm): 40 mm; Lift Rated Capacity (kg): 300 kg; Platform Size (mm): 600x640 mm.
The specification sheet records Max.Drive Speed (platform Stowed): 4; Max.Drive Speed (platform Elevated): 1.6; Min.turning Radius (mm): 1600 mm; Max.Climbing Capacity (%): 15~20 %; Driving Wheel Size (mm): 230x80 mm; Caster Size: in / 6.
The specification sheet records Driving Motor (v/kw): 2x24/0.4; Lifting Motor (v/kw): 24/1.6; Anerold battery (v/ah): 2x12/150; Charger (v/a): 24/15; Overall Length (mm): 1530 / 1620 mm; Overall Width (mm): 700 mm.
The specification sheet records Overall Height (mm): 1830 / 2130 / 1840 / 2000 mm; Overall Net Weight (kg): 430 / 450 / 660 / 680 kg.
Rated figures apply at the standard load centre unless a row says otherwise.
Each row in the table keeps the label and value from the source record.
Options and attachments are listed separately from the base chassis.
Those missing values can be requested directly through the enquiry form.
Configuration follows the load, working height and site layout.
The listed figures follow the record; options are confirmed on the quotation.
Door and beam heights decide which mast will clear the route.
Check the chassis width against the aisle and the container door.
Review the tyre type against the surface the machine will run on.
Match the power arrangement to the shifts and the working environment.
List the models that clear each constraint before asking for a quote.
On the FSEP3-2.7 / FSEP3-3.3 / FSEP3-4.0 / FSEP3-4.5, check the lowest door, beam height and aisle the truck has to pass through.
Measure the pallet footprint and the heaviest single load before comparing models.
On the FSEP3-2.7 / FSEP3-3.3 / FSEP3-4.0 / FSEP3-4.5, list the attachments required, such as clamps, sideshift or rotator.
Keep the charging or refuelling position clear of the main traffic aisle.
On the FSEP3-2.7 / FSEP3-3.3 / FSEP3-4.0 / FSEP3-4.5, state the shifts per day so the power arrangement can be sized properly.
On the FSEP3-2.7 / FSEP3-3.3 / FSEP3-4.0 / FSEP3-4.5, the operator follows the rated capacity marked on the chassis.
The working area is kept clear of loose packaging and obstacles.
On the FSEP3-2.7 / FSEP3-3.3 / FSEP3-4.0 / FSEP3-4.5, battery or fuel levels are checked at the start of each shift.
The operator checks load stability before each lift or move.
On the FSEP3-2.7 / FSEP3-3.3 / FSEP3-4.0 / FSEP3-4.5, the layout drawing shows where each machine sits in the operation.
Related models in the same group are listed on the family page.
On the FSEP3-2.7 / FSEP3-3.3 / FSEP3-4.0 / FSEP3-4.5, attachments such as clamps or rotators are matched to the load shape.
Storage cages and racking organise the loads it moves between stations.
On the FSEP3-2.7 / FSEP3-3.3 / FSEP3-4.0 / FSEP3-4.5, any option not listed should be confirmed in writing before order.
Capacity above the rated lift height follows the mast curve.
On the FSEP3-2.7 / FSEP3-3.3 / FSEP3-4.0 / FSEP3-4.5, site conditions such as gradient, dust and moisture belong in the enquiry.
Tyre choice should match the floor rather than the price list.
On the FSEP3-2.7 / FSEP3-3.3 / FSEP3-4.0 / FSEP3-4.5, the operation and parts material travel with the machine.
Mixed equipment can be listed on one enquiry.
On the FSEP3-2.7 / FSEP3-3.3 / FSEP3-4.0 / FSEP3-4.5, packing follows sea-freight practice for the chosen chassis.
Quote the serial number and component name when ordering spares.
The serial number identifies the build when parts are ordered later.
Test and conformity documents follow the model and destination market.
Ask for the specific certificate required for your target country.
Questions
The listed rated capacity is 300 kg at the standard load centre. Above the rated lift height capacity derates along the mast curve.
The listed turning radius is 1600 mm. Aisle width also depends on pallet depth and fork length.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.