Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

FSEM15-20 / FSEM15-25 / FSEM15-30 / FSEM15-35 / FSEM20-20 / FSEM10-16 / FSEM15-16 / FSEM20-16 — stacker

FSEM15-20 / FSEM15-25 / FSEM15-30 / FSEM15-35 / FSEM20-20 / FSEM10-16 / FSEM15-16 / FSEM20-16 Electric Stacker. Straddle legs carry the mast forward for a much narrower aisle.

FSEM15-20 / FSEM15-25 / FSEM15-30 / FSEM15-35 / FSEM20-20 / FSEM10-16 / FSEM15-16 / FSEM20-16 stacker — product photo 1 of 3

Ordering facts for the FSEM15-20 / FSEM15-25 / FSEM15-30 / FSEM15-35 / FSEM20-20 / FSEM10-16 / FSEM15-16 / FSEM20-16

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

FSEM15-20 / FSEM15-25 / FSEM15-30 / FSEM15-35 / FSEM20-20 / FSEM10-16 / FSEM15-16 / FSEM20-16 specification

Values are copied from the source record in their original order and units.

FSEM15-20 / FSEM15-25 / FSEM15-30 / FSEM15-35 / FSEM20-20 / FSEM10-16 / FSEM15-16 / FSEM20-16 specification table
ParameterValue
ModelFSEM15-20 / FSEM15-25 / FSEM15-30 / FSEM15-35 / FSEM20-20 / FSEM10-16 / FSEM15-16 / FSEM20-16
Rated Capacity1500 / 2000 / 1000 kg
Load Center400 mm
Max.Fork Height2000 / 2500 / 3000 / 3500 / 1600 mm
Max.Machine Height2560 / 3060 / 3560 / 4060 / 2080 mm
Handle Height1450~1460 mm
Fork Size1150×160 mm
Fork Widthmm
Min.Turning Radius1620 mm
Wheel Base1340 mm
Front-Wheel Distance339 mm
Max.Speed Without Load4.5~6
Max.Speed With Load4~5
Max.Climbing Capacity8~10 %
Driving Motor24/1.2
Lifting Motor24/2~3
Anerold battery12×2/210
Charger24/20-30
Overall Length2000 mm
Overall Width860 mm
Overall Height1580 / 1830 / 2080 / 2330 mm
Overall Net Weight680 / 695 / 710 / 725 / 690 / 570 / 600 / 620 kg
Request price Datasheet (print / save as PDF) Ask about voltage

Gallery

Product photographs

All detail images published for this model.

What this model is built to do

FSEM15-20 / FSEM15-25 / FSEM15-30 / FSEM15-35 / FSEM20-20 / FSEM10-16 / FSEM15-16 / FSEM20-16 Electric Stacker, part of the Stackers and order pickers line.

Walk-behind, ride-on and semi-electric stackers plus order picking platform trucks.

Low-level pallet stacking

Published figures for this build: rated capacity 1500 / 2000 / 1000 kg, overall width 860 mm, turning radius 1620 mm.

Walk-behind and stand-on stackers put loads straight onto racking.

The walk-behind model leaves the operator free to guide each load.

Stackers work in narrow aisles where a counterbalance truck will not turn.

Stackers work in narrow aisles where a counterbalance truck will not turn.

Confirm the charger voltage or fuel type for your destination country. Note cold store, outdoor gradient or container entry as a constraint.

Specification walk-through

The specification sheet records Model: FSEM15-20 / FSEM15-25 / FSEM15-30 / FSEM15-35 / FSEM20-20 / FSEM10-16 / FSEM15-16 / FSEM20-16; Rated Capacity (Q): 1500 / 2000 / 1000 kg; Load Center (C): 400 mm; Max.Fork Height (H3): 2000 / 2500 / 3000 / 3500 / 1600 mm; Max.Machine Height (H4): 2560 / 3060 / 3560 / 4060 / 2080 mm; Handle Height (H2): 1450~1460 mm.

The specification sheet records Fork Size (1×n): 1150×160 mm; Fork Width (E): mm; Min.Turning Radius (Wa): 1620 mm; Wheel Base (Y): 1340 mm; Front-Wheel Distance (X): 339 mm; Max.Speed Without Load (km/h): 4.5~6.

The specification sheet records Max.Speed With Load (km/h): 4~5; Max.Climbing Capacity (%): 8~10 %; Driving Motor (v/kw): 24/1.2; Lifting Motor (v/kw): 24/2~3; Anerold battery (v/ah): 12×2/210; Charger (v/a): 24/20-30.

The specification sheet records Overall Length (mm): 2000 mm; Overall Width (mm): 860 mm; Overall Height (mm): 1580 / 1830 / 2080 / 2330 mm; Overall Net Weight (kg): 680 / 695 / 710 / 725 / 690 / 570 / 600 / 620 kg.

Options and attachments are listed separately from the base chassis.

Rated figures apply at the standard load centre unless a row says otherwise.

Units are copied as published; convert them only when comparing models.

Those missing values can be requested directly through the enquiry form.

How to specify the right build

Configuration follows the load, working height and site layout.

The enquiry should list any attachment the job requires.

Measure the pallet footprint before the chassis is shortlisted.

Check the machine weight against floor loading where the site is raised.

Check the chassis width against the aisle and the container door.

Compare capacity first, then the lift height the job actually needs.

List the models that clear each constraint before asking for a quote.

  • Note any constraint: low door, narrow aisle, cold store, outdoor gradient or entry.
  • List attachments such as clamps, sideshift or rotator separately.
  • List the load per move, lift height and floor surface before comparing models.

Site preparation and operating notes

On the FSEM15-20 / FSEM15-25 / FSEM15-30 / FSEM15-35 / FSEM20-20 / FSEM10-16 / FSEM15-16 / FSEM20-16, state the shifts per day so the power arrangement can be sized properly.

Describe the floor surface: sealed concrete, asphalt, gravel or packed earth.

On the FSEM15-20 / FSEM15-25 / FSEM15-30 / FSEM15-35 / FSEM20-20 / FSEM10-16 / FSEM15-16 / FSEM20-16, list the attachments required, such as clamps, sideshift or rotator.

Measure the pallet footprint and the heaviest single load before comparing models.

On the FSEM15-20 / FSEM15-25 / FSEM15-30 / FSEM15-35 / FSEM20-20 / FSEM10-16 / FSEM15-16 / FSEM20-16, check headroom under beams, pipes and door frames along the route.

Operation and routine checks

On the FSEM15-20 / FSEM15-25 / FSEM15-30 / FSEM15-35 / FSEM20-20 / FSEM10-16 / FSEM15-16 / FSEM20-16, the operator checks load stability before each lift or move.

Unusual noise or movement is reported before further use.

On the FSEM15-20 / FSEM15-25 / FSEM15-30 / FSEM15-35 / FSEM20-20 / FSEM10-16 / FSEM15-16 / FSEM20-16, routine checks cover tyres, brakes, controls and visible leaks.

Battery or fuel levels are checked at the start of each shift.

How this model fits the operation

On the FSEM15-20 / FSEM15-25 / FSEM15-30 / FSEM15-35 / FSEM20-20 / FSEM10-16 / FSEM15-16 / FSEM20-16, a mixed enquiry can list this model together with other families.

The layout drawing shows where each machine sits in the operation.

On the FSEM15-20 / FSEM15-25 / FSEM15-30 / FSEM15-35 / FSEM20-20 / FSEM10-16 / FSEM15-16 / FSEM20-16, this machine usually works alongside pallet trucks and stacking equipment.

Attachments such as clamps or rotators are matched to the load shape.

Working conditions and honest limits

On the FSEM15-20 / FSEM15-25 / FSEM15-30 / FSEM15-35 / FSEM20-20 / FSEM10-16 / FSEM15-16 / FSEM20-16, the signed datasheet issued with the quotation is the binding version.

Attachments are quoted separately once the base chassis is fixed.

On the FSEM15-20 / FSEM15-25 / FSEM15-30 / FSEM15-35 / FSEM20-20 / FSEM10-16 / FSEM15-16 / FSEM20-16, tyre choice should match the floor rather than the price list.

Any option not listed should be confirmed in writing before order.

Delivery, documents and support

On the FSEM15-20 / FSEM15-25 / FSEM15-30 / FSEM15-35 / FSEM20-20 / FSEM10-16 / FSEM15-16 / FSEM20-16, the booking reference is issued with the proforma invoice.

Packing follows sea-freight practice for the chosen chassis.

On the FSEM15-20 / FSEM15-25 / FSEM15-30 / FSEM15-35 / FSEM20-20 / FSEM10-16 / FSEM15-16 / FSEM20-16, quote the serial number and component name when ordering spares.

Loading is recorded before the container is sealed.

The operation material covers controls, checks and routine service points.

Test and conformity documents follow the model and destination market.

The parts manual lists the wear items and their reference views.

Before you order

  • Capacity shown is the rated figure at the stated load centre; above the rated lift height the capacity follows the mast curve.
  • Check overall width and turning space against the aisle and any narrow doorway before the chassis is shortlisted.
  • Attachment options are confirmed on the quotation; their weight and width are counted against the residual capacity.
  • The certificate set for an order follows the destination market; ISO factory certificates and the serial list ship with the consignment.
  • The parts manual ships with the machine; identify wear items by serial number and part name when reordering.

Container loading estimate

Published overall dimensions for this build are about 2.0 m long and 0.86 m wide.

On a standard 20GP dry-van floor that footprint allows about 6 unit(s) per layer; a 40HQ allows about 13 unit(s) per layer.

The count is a footprint estimate against standard dry-van internal dimensions, not a loading guarantee. Final blocking, bracing and stacking follow the loading plan confirmed before sealing, and this model can be combined with other families in one container where the floor allows.

Questions

Questions buyers ask before ordering

What load centre applies to the rating?+

The specification lists a load centre of 400 mm. Loads carried farther forward reduce rated capacity.

What aisle width does it need?+

The listed turning radius is 1620 mm. Aisle width also depends on pallet depth and fork length.

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

What does the price depend on?+

Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.

What is the minimum order quantity?+

The minimum order quantity is one set, and mixed models can be combined in one container.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Stackers and order pickers related models

ModelCapacityLiftPowerTypical use
PWSR500 kg——Narrow-aisle put-away
WSR1000 kg——Walk-behind pallet lifting
CTY-A—1600—Low-level pallet stacking
CTY-D—1600—Narrow-aisle put-away
CTY-E—1600—Walk-behind pallet lifting

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.