Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

FSEM10-20 / FSEM10-25 / FSEM10-30 / FSEM10-35 — stacker

FSEM10-20 / FSEM10-25 / FSEM10-30 / FSEM10-35 Electric Stacker, rated capacity 1000 kg. This class handles put-away and retrieval on pallet racking.

FSEM10-20 / FSEM10-25 / FSEM10-30 / FSEM10-35 stacker — product photo 1 of 1
Key published figures Full specification →

Ordering facts for the FSEM10-20 / FSEM10-25 / FSEM10-30 / FSEM10-35

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

FSEM10-20 / FSEM10-25 / FSEM10-30 / FSEM10-35 specification

Values are copied from the source record in their original order and units.

FSEM10-20 / FSEM10-25 / FSEM10-30 / FSEM10-35 specification table
ParameterValue
ModelFSEM10-20 / FSEM10-25 / FSEM10-30 / FSEM10-35
Rated Capacity1000 kg
Load Center400 mm
Max.Fork Height2000 / 2500 / 3000 / 3500 mm
Max.Machine Height2560 / 3060 / 3560 / 4060 mm
Handle Height1450~1460 mm
Fork Size1150×160 mm
Fork Widthmm
Min.Turning Radius1620 mm
Wheel Base1340 mm
Front-Wheel Distance339 mm
Max.Speed Without Load4.5~6
Max.Speed With Load4~5
Max.Climbing Capacity8~10 %
Driving Motor24/1.2
Lifting Motor24/2~3
Anerold battery12×2/210
Charger24/20-30
Overall Length2000 mm
Overall Width860 mm
Overall Height1580 / 1830 / 2080 / 2330 mm
Overall Net Weight650 / 665 / 680 / 695 kg
Request price Datasheet (print / save as PDF) Ask about voltage

What this model is built to do

FSEM10-20 / FSEM10-25 / FSEM10-30 / FSEM10-35 Electric Stacker, part of the Stackers and order pickers line.

Walk-behind, ride-on and semi-electric stackers plus order picking platform trucks.

Walk-behind pallet lifting

Published figures for this build: rated capacity 1000 kg, overall width 860 mm, turning radius 1620 mm.

Stackers keep the pallet close to the legs while lifting at height.

This class handles put-away and retrieval on pallet racking.

Walk-behind and stand-on stackers put loads straight onto racking.

Walk-behind and stand-on stackers put loads straight onto racking.

Confirm the aisle width against the pallet depth before choosing a chassis. Check closed mast or chassis height against the lowest door on the route.

Specification walk-through

The specification sheet records Model: FSEM10-20 / FSEM10-25 / FSEM10-30 / FSEM10-35; Rated Capacity (Q): 1000 kg; Load Center (C): 400 mm; Max.Fork Height (H3): 2000 / 2500 / 3000 / 3500 mm; Max.Machine Height (H4): 2560 / 3060 / 3560 / 4060 mm; Handle Height (H2): 1450~1460 mm.

The specification sheet records Fork Size (1×n): 1150×160 mm; Fork Width (E): mm; Min.Turning Radius (Wa): 1620 mm; Wheel Base (Y): 1340 mm; Front-Wheel Distance (X): 339 mm; Max.Speed Without Load (km/h): 4.5~6.

The specification sheet records Max.Speed With Load (km/h): 4~5; Max.Climbing Capacity (%): 8~10 %; Driving Motor (v/kw): 24/1.2; Lifting Motor (v/kw): 24/2~3; Anerold battery (v/ah): 12×2/210; Charger (v/a): 24/20-30.

The specification sheet records Overall Length (mm): 2000 mm; Overall Width (mm): 860 mm; Overall Height (mm): 1580 / 1830 / 2080 / 2330 mm; Overall Net Weight (kg): 650 / 665 / 680 / 695 kg.

An em dash marks a value the source record did not publish.

Rated figures apply at the standard load centre unless a row says otherwise.

Options and attachments are listed separately from the base chassis.

Those missing values can be requested directly through the enquiry form.

How to specify the right build

Configuration follows the load, working height and site layout.

Measure the pallet footprint before the chassis is shortlisted.

Send pallet size, door height and aisle width with the enquiry.

List the models that clear each constraint before asking for a quote.

Note any attachment that changes the load centre or the overall width.

Compare the lowered height against the lowest door on the route.

Match the power arrangement to the shifts and the working environment.

  • List attachments such as clamps, sideshift or rotator separately.
  • Mark the stations where loads are picked up and dropped off each shift.
  • List the load per move, lift height and floor surface before comparing models.

Site preparation and operating notes

On the FSEM10-20 / FSEM10-25 / FSEM10-30 / FSEM10-35, send photographs of the racking and the existing working area when possible.

Check the lowest door, beam height and aisle the truck has to pass through.

On the FSEM10-20 / FSEM10-25 / FSEM10-30 / FSEM10-35, check headroom under beams, pipes and door frames along the route.

Note any slope, threshold or step along the working route.

On the FSEM10-20 / FSEM10-25 / FSEM10-30 / FSEM10-35, list the attachments required, such as clamps, sideshift or rotator.

Operation and routine checks

On the FSEM10-20 / FSEM10-25 / FSEM10-30 / FSEM10-35, the operator follows the rated capacity marked on the chassis.

The operator checks load stability before each lift or move.

On the FSEM10-20 / FSEM10-25 / FSEM10-30 / FSEM10-35, routine checks cover tyres, brakes, controls and visible leaks.

Loads are kept low while travelling between stations.

How this model fits the operation

On the FSEM10-20 / FSEM10-25 / FSEM10-30 / FSEM10-35, the receiving side pairs it with a dock ramp or platform where needed.

The layout drawing shows where each machine sits in the operation.

On the FSEM10-20 / FSEM10-25 / FSEM10-30 / FSEM10-35, storage cages and racking organise the loads it moves between stations.

A mixed enquiry can list this model together with other families.

Working conditions and honest limits

On the FSEM10-20 / FSEM10-25 / FSEM10-30 / FSEM10-35, site conditions such as gradient, dust and moisture belong in the enquiry.

The specification sheet is the binding reference for listed values.

On the FSEM10-20 / FSEM10-25 / FSEM10-30 / FSEM10-35, the signed datasheet issued with the quotation is the binding version.

Capacity above the rated lift height follows the mast curve.

Delivery, documents and support

On the FSEM10-20 / FSEM10-25 / FSEM10-30 / FSEM10-35, quote the serial number and component name when ordering spares.

Documents issued for an order are listed in the quotation.

On the FSEM10-20 / FSEM10-25 / FSEM10-30 / FSEM10-35, quotations follow the model, listed specification and destination port.

The operation and parts material travel with the machine.

Ask for the specific certificate required for your target country.

The operation material covers controls, checks and routine service points.

The parts manual lists the wear items and their reference views.

Before you order

  • Capacity shown is the rated figure at the stated load centre; above the rated lift height the capacity follows the mast curve.
  • Check overall width and turning space against the aisle and any narrow doorway before the chassis is shortlisted.
  • Attachment options are confirmed on the quotation; their weight and width are counted against the residual capacity.
  • The certificate set for an order follows the destination market; ISO factory certificates and the serial list ship with the consignment.
  • Spare parts follow the parts manual supplied with the machine; quote the serial number and component name when ordering wear parts.

Container loading estimate

Published overall dimensions for this build are about 2.0 m long and 0.86 m wide.

On a standard 20GP dry-van floor that footprint allows about 6 unit(s) per layer; a 40HQ allows about 13 unit(s) per layer.

The count is a footprint estimate against standard dry-van internal dimensions, not a loading guarantee. Final blocking, bracing and stacking follow the loading plan confirmed before sealing, and this model can be combined with other families in one container where the floor allows.

Questions

Questions buyers ask before ordering

What load does the FSEM10-20 / FSEM10-25 / FSEM10-30 / FSEM10-35 carry?+

The listed rated capacity is 1000 kg at the standard load centre. Above the rated lift height capacity derates along the mast curve.

What load centre applies to the rating?+

The specification lists a load centre of 400 mm. Loads carried farther forward reduce rated capacity.

What aisle width does it need?+

The listed turning radius is 1620 mm. Aisle width also depends on pallet depth and fork length.

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

What does the price depend on?+

Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Stackers and order pickers related models

ModelCapacityLiftPowerTypical use
PWSR500 kg——Narrow-aisle put-away
WSR1000 kg——Walk-behind pallet lifting
CTY-A—1600—Low-level pallet stacking
CTY-D—1600—Narrow-aisle put-away
CTY-E—1600—Walk-behind pallet lifting

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.