Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

Electric rough terrain forklift — electric counterbalance forklift

Electric rough terrain forklift Electric rough terrain forklift, DC48V. Battery trucks keep noise and fumes low in covered storage areas.

Electric rough terrain forklift — product photo 1 of 9
Key published figures Full specification →

Ordering facts for the Electric rough terrain forklift

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

Electric rough terrain forklift specification

Values are copied from the source record in their original order and units.

Electric rough terrain forklift specification table
ParameterUnitTK-600TK-800TK-1000TK-1500
Model—TK-600TK-800TK-1000TK-1500
Driving motor—battery battery battery
Driving type—Walkie Walkie Walkie
capacitykg60080010001500
Load centermm430 530 530
Net weightkg55095010501900
Tires—Rubber Rubber Rubber
Lifting heightmm1470185018501950
Lowest fork heightmm≤80 ≤80 ≤ 70 ≤70
Overall Lengthwith fork2550300033003300
Overall Widthmm79095011501150
Fork lengthmm8008009201000
Wheelbasemm1150145015001500
Outer fork widthmm680680680680
Inner fork widthmm305305305305
Turning raidusmm1270150017001700
Drive speed full load/unload—mm/s 4.0/5.0 4.0/5.0 4.0/5.0 4.0/5.0
Lifting speed: unload/full load—mm/s 140/135 140/135 140/135 140/135
Lower speed unload/full load—mm/s 150/155 150/155 150/155 150/155
Max grade ability loaded/unload%9/13 9/13 9/13 9/13
Service Break—Electric
Drive motor—DC motor
Drive motor ratingkw1.2 1.5 1.5
Lifting motor—DC motor DC motor DC motor
Lifting motor ratingkw1.2 1.5 2.2
Battery VoltagevDC48V DC48V DC48V
Battery capacityah32323265
Sound level at driver ear acc. to DIN12053—dB < 70 < 70 < 70
Request price Datasheet (print / save as PDF) Ask about voltage

Gallery

Product photographs

All detail images published for this model.

What this model is built to do

Electric rough terrain forklift Electric rough terrain forklift, part of the Electric forklift trucks line.

Battery counterbalance and multi-directional forklifts for indoor warehouses and sealed-floor duty.

Racking aisle put-away

Published figures for this build: rated capacity 600 800 1000 1500 kg, overall width 790 950 1150 1150 mm.

Battery trucks keep noise and fumes low in covered storage areas.

The battery sits under the operator and acts as counterweight.

The compact chassis fits narrow indoor aisles and dock approaches.

Warehouses, cold stores and food plants are common indoor duties.

Confirm the aisle width against the pallet depth before choosing a chassis. Note cold store, outdoor gradient or container entry as a constraint.

Specification walk-through

The specification sheet records Model: TK-600 / TK-800 / TK-1000 / TK-1500; Driving motor: battery battery battery; Driving type: Walkie Walkie Walkie; capacity (kg): 600 / 800 / 1000 / 1500; Load center (mm): 430 530 530; Net weight (kg): 550 / 950 / 1050 / 1900.

The specification sheet records Tires: Rubber Rubber Rubber; Lifting height (mm): 1470 / 1850 / 1850 / 1950; Lowest fork height (mm): ≤80 ≤80 ≤ 70 ≤70; Overall Length (with fork): 2550 / 3000 / 3300 / 3300; Overall Width (mm): 790 / 950 / 1150 / 1150; Fork length (mm): 800 / 800 / 920 / 1000.

The specification sheet records Wheelbase (mm): 1150 / 1450 / 1500 / 1500; Outer fork width (mm): 680 / 680 / 680 / 680; Inner fork width (mm): 305 / 305 / 305 / 305; Turning raidus (mm): 1270 / 1500 / 1700 / 1700; Drive speed full load/unload: mm/s 4.0/5.0 4.0/5.0 4.0/5.0 4.0/5.0; Lifting speed: unload/full load: mm/s 140/135 140/135 140/135 140/135.

The specification sheet records Lower speed unload/full load: mm/s 150/155 150/155 150/155 150/155; Max grade ability loaded/unload (%): 9/13 9/13 9/13 9/13; Service Break: Electric; Drive motor: DC motor; Drive motor rating (kw): 1.2 1.5 1.5; Lifting motor: DC motor DC motor DC motor.

The specification sheet records Lifting motor rating (kw): 1.2 1.5 2.2; Battery Voltage (v): DC48V DC48V DC48V; Battery capacity (ah): 32 / 32 / 32 / 65; Sound level at driver ear acc. to DIN12053: dB < 70 < 70 < 70.

Those missing values can be requested directly through the enquiry form.

Options and attachments are listed separately from the base chassis.

Each row in the table keeps the label and value from the source record.

Units are copied as published; convert them only when comparing models.

How to specify the right build

For an electric chassis, the main choices are battery capacity, mast type and attachment.

Measure the pallet footprint before the chassis is shortlisted.

Door and beam heights decide which mast will clear the route.

Note any attachment that changes the load centre or the overall width.

Compare capacity first, then the lift height the job actually needs.

Review the tyre type against the surface the machine will run on.

List the models that clear each constraint before asking for a quote.

  • Mark the stations where loads are picked up and dropped off each shift.
  • State the shifts per day so the power arrangement can be sized properly.
  • Send those figures with the model code; the reply confirms whether the chassis suits.

Site preparation and operating notes

On the Electric rough terrain forklift, send photographs of the racking and the existing working area when possible.

Mark the stations where loads are picked up and dropped off each shift.

On the Electric rough terrain forklift, keep the charging or refuelling position clear of the main traffic aisle.

Check the lowest door, beam height and aisle the truck has to pass through.

On the Electric rough terrain forklift, describe the floor surface: sealed concrete, asphalt, gravel or packed earth.

Operation and routine checks

On the Electric rough terrain forklift, routine checks cover tyres, brakes, controls and visible leaks.

The operator checks load stability before each lift or move.

On the Electric rough terrain forklift, the working area is kept clear of loose packaging and obstacles.

Unusual noise or movement is reported before further use.

How this model fits the operation

On the Electric rough terrain forklift, spare parts for wear items follow the parts manual after delivery.

Attachments such as clamps or rotators are matched to the load shape.

On the Electric rough terrain forklift, this machine usually works alongside pallet trucks and stacking equipment.

A mixed enquiry can list this model together with other families.

Working conditions and honest limits

On the Electric rough terrain forklift, dimensions are checked against the source record before quoting.

The signed datasheet issued with the quotation is the binding version.

On the Electric rough terrain forklift, the specification sheet is the binding reference for listed values.

Attachments are quoted separately once the base chassis is fixed.

Delivery, documents and support

On the Electric rough terrain forklift, quotations follow the model, listed specification and destination port.

Packing follows sea-freight practice for the chosen chassis.

On the Electric rough terrain forklift, quote the serial number and component name when ordering spares.

Documents issued for an order are listed in the quotation.

The parts manual lists the wear items and their reference views.

The operation material covers controls, checks and routine service points.

The serial number identifies the build when parts are ordered later.

Before you order

  • Compare the published capacity against the heaviest single move before the mast or attachment is chosen.
  • Measure the lowered chassis and mast height against the lowest door and the container door on the planned route.
  • Attachments are quoted separately once the base chassis is fixed, so the attachment weight can be counted against the residual capacity.
  • CE or GS documentation where applicable is listed in the quotation together with the factory quality certificates.
  • The parts manual ships with the machine; identify wear items by serial number and part name when reordering.

Questions

Questions buyers ask before ordering

What power unit does it use?+

The listed power arrangement is DC48V. Confirm the supply voltage or fuel type for your site before ordering.

How is the battery arranged?+

The specification lists DC48V. Battery choice depends on shifts per day and spare battery needs.

Which tyres are fitted?+

The listed tyre type is Rubber Rubber Rubber. Solid tyres suit sealed concrete; pneumatic tyres suit rough outdoor ground.

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

What does the price depend on?+

Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Electric forklift trucks related models

ModelCapacityLiftPowerTypical use
CPDB10C———Indoor order picking
MK15-30—3000 mmElectricCovered storage shifts
Electric———Indoor order picking
Electric———Cold store and food plants
Electric———Cold store and food plants

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.