Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

Electric forklift CPD15 CPD18 — electric counterbalance forklift

Electric forklift CPD15 CPD18 Electric forklift CPD15 CPD18. Indoor shifts without exhaust are the main reason buyers choose electric.

Electric forklift CPD15 CPD18 — product photo 1 of 2

Ordering facts for the Electric forklift CPD15 CPD18

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

Electric forklift CPD15 CPD18 specification

Values are copied from the source record in their original order and units.

Electric forklift CPD15 CPD18 specification table
ParameterValue
TypeNo. Item Code Unit Data Data
Identification1.02 Model CPD 15 CPD 18
Dimensions2.01 STD Max height(with backrest) mm 4030 4030
Tires3.01 Wheels number front/rear(X=dr ven wheels) X=2/2 X=2/2
OtherDetails4.01 Max.traveling speed loaded/unloaded(STD) km/h 13/12
Max.traveling speed loaded/unloaded13/12
Max.traveling speed loaded/unloaded15/14
Max.ting speed loaded/unloaded500/350 500/350
Max.it ing speed loaded/unloaded500/350 500/350
Max.gradient loaded20 20
Drive motor8.2 8.2
Lt motor10.6
Li-ion Battery vot age/capacity48/200
Request price Datasheet (print / save as PDF) Ask about voltage

Gallery

Product photographs

All detail images published for this model.

What this model is built to do

Electric forklift CPD15 CPD18 Electric forklift CPD15 CPD18, part of the Electric forklift trucks line.

Battery counterbalance and multi-directional forklifts for indoor warehouses and sealed-floor duty.

Cold store and food plants

Published figures for this build: rated capacity 48/200.

The battery sits under the operator and acts as counterweight.

Electric counterbalance trucks suit sealed floors and racking aisles.

Indoor shifts without exhaust are the main reason buyers choose electric.

Warehouses, cold stores and food plants are common indoor duties.

Confirm the charger voltage or fuel type for your destination country. Describe the shifts per day when the power arrangement is selected.

Specification walk-through

The specification sheet records Type: No. Item Code Unit Data Data; Specification: Manufacturer SUNRISE SUNRISE; Identification: 1.02 Model CPD 15 CPD 18; Specification: Power type Electric (AC) Electric (AC); Specification: Rated capacity Q kg 1500 1800; Specification: Load center J mm 500 500.

The specification sheet records Dimensions: 2.01 STD Max height(with backrest) mm 4030 4030; Specification: STD Max lifting height h1 mm 3000 3000; Specification: Overhead guard height h4 mm 2140 2140; Specification: Overall length(with fork) L1 mm 2982 2982; Specification: Wheelbase L2 mm 1380 1380; Specification: Front overhang L3 mm 392 392.

The specification sheet records Specification: Rear overhang L4 mm 290 290; Specification: Min.ground clearance(Frame/Mast) m1/m2 mm 90/95 90/95; Specification: Overall width W1 mm 1086 1086; Specification: Adjusting range of fork(outside) mm 210-960 210-960; Specification: STD Fork size(L 5*W*T) mm 920x100×35; Specification: Front wheel tread S mm 910 910.

The specification sheet records Specification: Rear wheel tread P mm 920 920; Specification: Min.turning radius R1 mm 1800 1800; Specification: Min aisle width for pallet 1000x 1200, crossways mm 3409 3409; Specification: Min aisle width for pallet 800x 1200, lengthways mm 3591 3591; Tires: 3.01 Wheels number front/rear(X=dr ven wheels) X=2/2 X=2/2; Specification: Tires type Pneumatic Pneumatic.

The specification sheet records Specification: Tires size, front 6.00-9-10PR; Specification: Tires size, rear 16×6-8-10PR; OtherDetails: 4.01 Max.traveling speed loaded/unloaded(STD) km/h 13/12; Max.traveling speed loaded/unloaded (High): 13/12; Max.traveling speed loaded/unloaded (Li-ion): 15/14; Specification: Max.lit ing speed loaded/unloaded(STD) mm/s 500/350 500/350.

The specification sheet records Max.ting speed loaded/unloaded (High): 500/350 500/350; Max.it ing speed loaded/unloaded (Li-ion): 500/350 500/350; Specification: Lowering speed loaded/unloaded mm/s Loaded≤600 /Unloaded≥300 Loaded≤600 /Unloaded≥300; Specification: Max.gradi en loaded(STD) % 15 15; Max.gradient loaded (High/Liion): 20 20; Specification: STD operating weight(wth oil&water) kg 3050 3270.

The specification sheet records Specification: Axles loading front/rear(loaded) kg 4008/542 4430/640; Specification: Axles loading front/rear(unloaded) kg 1555/1495 1615/1655; Specification: Drive motor(STD) kw 8.2 8.2; Drive motor (High/Li-ion): 8.2 8.2; Specification: Lit motor(STD) kw 10.6; Lt motor (High/Li-ion): 10.6.

The specification sheet records Specification: Controller Inomotion Inomotion; Specification: Lead-acid Battery vot age/capacity V/Ah 48/420; Li-ion Battery vot age/capacity: 48/200.

Those missing values can be requested directly through the enquiry form.

An em dash marks a value the source record did not publish.

Units are copied as published; convert them only when comparing models.

Each row in the table keeps the label and value from the source record.

How to specify the right build

Configuration follows the load, working height and site layout.

Dimensions in the table come from the source record.

Send pallet size, door height and aisle width with the enquiry.

Check the machine weight against floor loading where the site is raised.

Note any attachment that changes the load centre or the overall width.

Review the tyre type against the surface the machine will run on.

Match the power arrangement to the shifts and the working environment.

  • Note any constraint: low door, narrow aisle, cold store, outdoor gradient or entry.
  • Mark the stations where loads are picked up and dropped off each shift.
  • State the shifts per day so the power arrangement can be sized properly.

Site preparation and operating notes

On the Electric forklift CPD15 CPD18, check headroom under beams, pipes and door frames along the route.

Describe the floor surface: sealed concrete, asphalt, gravel or packed earth.

On the Electric forklift CPD15 CPD18, send photographs of the racking and the existing working area when possible.

Measure the pallet footprint and the heaviest single load before comparing models.

On the Electric forklift CPD15 CPD18, list the attachments required, such as clamps, sideshift or rotator.

Operation and routine checks

On the Electric forklift CPD15 CPD18, the operator follows the rated capacity marked on the chassis.

The operator checks load stability before each lift or move.

On the Electric forklift CPD15 CPD18, loads are kept low while travelling between stations.

Attachments are secured before the machine leaves the station.

How this model fits the operation

On the Electric forklift CPD15 CPD18, related models in the same group are listed on the family page.

Attachments such as clamps or rotators are matched to the load shape.

On the Electric forklift CPD15 CPD18, a mixed enquiry can list this model together with other families.

Spare parts for wear items follow the parts manual after delivery.

Working conditions and honest limits

On the Electric forklift CPD15 CPD18, tyre choice should match the floor rather than the price list.

The specification sheet is the binding reference for listed values.

On the Electric forklift CPD15 CPD18, attachments are quoted separately once the base chassis is fixed.

The signed datasheet issued with the quotation is the binding version.

Delivery, documents and support

On the Electric forklift CPD15 CPD18, the operation and parts material travel with the machine.

Quote the serial number and component name when ordering spares.

On the Electric forklift CPD15 CPD18, quotations follow the model, listed specification and destination port.

Wear parts are supplied after delivery against the parts manual.

Ask for the specific certificate required for your target country.

The operation material covers controls, checks and routine service points.

Test and conformity documents follow the model and destination market.

Before you order

  • Compare the published capacity against the heaviest single move before the mast or attachment is chosen.
  • Measure the lowered chassis and mast height against the lowest door and the container door on the planned route.
  • Attachment options are confirmed on the quotation; their weight and width are counted against the residual capacity.
  • CE or GS documentation where applicable is listed in the quotation together with the factory quality certificates.
  • Wear parts are ordered after delivery against the parts manual, the serial number and the component name.

Questions

Questions buyers ask before ordering

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

What does the price depend on?+

Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.

What is the minimum order quantity?+

The minimum order quantity is one set, and mixed models can be combined in one container.

How is payment arranged?+

Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.

Which ports can the machine ship from?+

Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Electric forklift trucks related models

ModelCapacityLiftPowerTypical use
CPDB10C———Indoor order picking
MK15-30—3000 mmElectricCovered storage shifts
Electric———Indoor order picking
Electric———Cold store and food plants
2.5T2500 kg10000 mmElectricIndoor order picking

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.