Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

CPDB10C / CPDB15C / CPDB20C / CPDB15D / CPDB15E — electric counterbalance forklift

CPDB10C / CPDB15C / CPDB20C / CPDB15D / CPDB15E Electric Forklift. Indoor shifts without exhaust are the main reason buyers choose electric.

CPDB10C / CPDB15C / CPDB20C / CPDB15D / CPDB15E electric counterbalance forklift — product photo 1 of 11

Ordering facts for the CPDB10C / CPDB15C / CPDB20C / CPDB15D / CPDB15E

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

CPDB10C / CPDB15C / CPDB20C / CPDB15D / CPDB15E specification

Values are copied from the source record in their original order and units.

CPDB10C / CPDB15C / CPDB20C / CPDB15D / CPDB15E specification table
ParameterValue
ModelCPDB10C / CPDB15C / CPDB20C / CPDB15D / CPDB15E
1Characteristics / Power type / Battery
2Capacity / kg / 1000 / 1500 / 2000
3Load center / mm / 500
4Lifting height / mm / 3000
5Fork size / LxWxH / mm / 920×100×35 / 1070×100×40 / 1000×100×35
6Tilt / F/B / 6/12 / 3/5
7Min.turning radius / mm / 1300 / 2300 / 1560
8Min Aisle width / mm / 2000 / 1560 / 2500 / 3300
9Min.ground clearance / mm / 40
10Overhead guard height / mm / 1950 / 2170
11Height from seat to overhead / mm / 970 / 1005 / 930
12Perf / Traveling speed / Unload/loaded / km/h / 11/8 / 12/10 / 5.5/4.5
13Lifting speed / Unload/loaded / mm/s / 320/260 / 340/280 / 140/100
14Gradeability / 14/12 / 15 / 8.0/5.0
15Dimensions / Overall length (without fork) / mm / 2600 / 2900 / 3450 / 3150
16Overall width / mm / 1018 / 1150
17Mast extended height / mm / 4000 / 3650
18Mast lowered height / mm / 2020
19Powertrain / Tire / Front / 18*6*121/8 / 6.50-10 / 15*4 1/2-8
20Rear / 323*100 / 250*80
21Wheelbase / mm / 1100 / 1380 / 1630
22Tread width / Front/Rear / mm / 870/160 / 900/145 / 960
23Curb weight / None-load / kg / 1610 / 2050 / 2610 / 1800
25Motor / Driving / KW / 4 / 5 / 10 / 1.2
26Lifting / KW / 3 / 4 / 12 / 2.2
24Battery / Voltage/Capacity / Curtis / FJ / SANY / LN
27Controler / AC+DC / AC / DC
28Voltage / 48 / 24V
29Battery / 12V/160AH*4 / 6V/240AH*8 / 2V/480AH*24 / 12V/140AH*4 / 240AH
Request price Datasheet (print / save as PDF) Ask about voltage

Gallery

Product photographs

All detail images published for this model.

What this model is built to do

CPDB10C / CPDB15C / CPDB20C / CPDB15D / CPDB15E Electric Forklift, part of the Electric forklift trucks line.

Battery counterbalance and multi-directional forklifts for indoor warehouses and sealed-floor duty.

Indoor order picking

Electric counterbalance trucks suit sealed floors and racking aisles.

The compact chassis fits narrow indoor aisles and dock approaches.

Electric counterbalance trucks suit sealed floors and racking aisles.

Indoor shifts without exhaust are the main reason buyers choose electric.

Note cold store, outdoor gradient or container entry as a constraint. Check closed mast or chassis height against the lowest door on the route.

Specification walk-through

The specification sheet records Model: CPDB10C / CPDB15C / CPDB20C / CPDB15D / CPDB15E; 1: Characteristics / Power type / Battery; 2: Capacity / kg / 1000 / 1500 / 2000; 3: Load center / mm / 500; 4: Lifting height / mm / 3000; 5: Fork size / LxWxH / mm / 920×100×35 / 1070×100×40 / 1000×100×35.

The specification sheet records 6: Tilt / F/B / 6/12 / 3/5; 7: Min.turning radius / mm / 1300 / 2300 / 1560; 8: Min Aisle width / mm / 2000 / 1560 / 2500 / 3300; 9: Min.ground clearance / mm / 40; 10: Overhead guard height / mm / 1950 / 2170; 11: Height from seat to overhead / mm / 970 / 1005 / 930.

The specification sheet records 12: Perf / Traveling speed / Unload/loaded / km/h / 11/8 / 12/10 / 5.5/4.5; 13: Lifting speed / Unload/loaded / mm/s / 320/260 / 340/280 / 140/100; 14: Gradeability / 14/12 / 15 / 8.0/5.0; 15: Dimensions / Overall length (without fork) / mm / 2600 / 2900 / 3450 / 3150; 16: Overall width / mm / 1018 / 1150; 17: Mast extended height / mm / 4000 / 3650.

The specification sheet records 18: Mast lowered height / mm / 2020; 19: Powertrain / Tire / Front / 18*6*121/8 / 6.50-10 / 15*4 1/2-8; 20: Rear / 323*100 / 250*80; 21: Wheelbase / mm / 1100 / 1380 / 1630; 22: Tread width / Front/Rear / mm / 870/160 / 900/145 / 960; 23: Curb weight / None-load / kg / 1610 / 2050 / 2610 / 1800.

The specification sheet records 25: Motor / Driving / KW / 4 / 5 / 10 / 1.2; 26: Lifting / KW / 3 / 4 / 12 / 2.2; 24: Battery / Voltage/Capacity / Curtis / FJ / SANY / LN; 27: Controler / AC+DC / AC / DC; 28: Voltage / 48 / 24V; 29: Battery / 12V/160AH*4 / 6V/240AH*8 / 2V/480AH*24 / 12V/140AH*4 / 240AH.

An em dash marks a value the source record did not publish.

Those missing values can be requested directly through the enquiry form.

Rated figures apply at the standard load centre unless a row says otherwise.

Each row in the table keeps the label and value from the source record.

How to specify the right build

Configuration follows the load, working height and site layout.

The listed figures follow the record; options are confirmed on the quotation.

The enquiry should list any attachment the job requires.

List the models that clear each constraint before asking for a quote.

Note any attachment that changes the load centre or the overall width.

Review the tyre type against the surface the machine will run on.

Check the chassis width against the aisle and the container door.

  • State the shifts per day so the power arrangement can be sized properly.
  • Mark the stations where loads are picked up and dropped off each shift.
  • Send those figures with the model code; the reply confirms whether the chassis suits.

Site preparation and operating notes

On the CPDB10C / CPDB15C / CPDB20C / CPDB15D / CPDB15E, send photographs of the racking and the existing working area when possible.

Note any slope, threshold or step along the working route.

On the CPDB10C / CPDB15C / CPDB20C / CPDB15D / CPDB15E, mark the stations where loads are picked up and dropped off each shift.

Check headroom under beams, pipes and door frames along the route.

On the CPDB10C / CPDB15C / CPDB20C / CPDB15D / CPDB15E, keep the charging or refuelling position clear of the main traffic aisle.

Operation and routine checks

On the CPDB10C / CPDB15C / CPDB20C / CPDB15D / CPDB15E, unusual noise or movement is reported before further use.

Routine checks cover tyres, brakes, controls and visible leaks.

On the CPDB10C / CPDB15C / CPDB20C / CPDB15D / CPDB15E, attachments are secured before the machine leaves the station.

The operator checks load stability before each lift or move.

How this model fits the operation

On the CPDB10C / CPDB15C / CPDB20C / CPDB15D / CPDB15E, spare parts for wear items follow the parts manual after delivery.

Related models in the same group are listed on the family page.

On the CPDB10C / CPDB15C / CPDB20C / CPDB15D / CPDB15E, the receiving side pairs it with a dock ramp or platform where needed.

Storage cages and racking organise the loads it moves between stations.

Working conditions and honest limits

On the CPDB10C / CPDB15C / CPDB20C / CPDB15D / CPDB15E, the signed datasheet issued with the quotation is the binding version.

Any option not listed should be confirmed in writing before order.

On the CPDB10C / CPDB15C / CPDB20C / CPDB15D / CPDB15E, attachments are quoted separately once the base chassis is fixed.

Tyre choice should match the floor rather than the price list.

Delivery, documents and support

On the CPDB10C / CPDB15C / CPDB20C / CPDB15D / CPDB15E, the operation and parts material travel with the machine.

Quotations follow the model, listed specification and destination port.

On the CPDB10C / CPDB15C / CPDB20C / CPDB15D / CPDB15E, mixed equipment can be listed on one enquiry.

Loading is recorded before the container is sealed.

Test and conformity documents follow the model and destination market.

The parts manual lists the wear items and their reference views.

The serial number identifies the build when parts are ordered later.

Before you order

  • Capacity shown is the rated figure at the stated load centre; above the rated lift height the capacity follows the mast curve.
  • Check overall width and turning space against the aisle and any narrow doorway before the chassis is shortlisted.
  • Attachments are quoted separately once the base chassis is fixed, so the attachment weight can be counted against the residual capacity.
  • The certificate set for an order follows the destination market; ISO factory certificates and the serial list ship with the consignment.
  • Spare parts follow the parts manual supplied with the machine; quote the serial number and component name when ordering wear parts.

Questions

Questions buyers ask before ordering

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

What does the price depend on?+

Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.

What is the minimum order quantity?+

The minimum order quantity is one set, and mixed models can be combined in one container.

How is payment arranged?+

Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.

Which ports can the machine ship from?+

Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Electric forklift trucks related models

ModelCapacityLiftPowerTypical use
MK15-30—3000 mmElectricCovered storage shifts
Electric———Indoor order picking
Electric———Cold store and food plants
Electric———Cold store and food plants
2.5T2500 kg10000 mmElectricIndoor order picking

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.