Electric forklift 2ton 2.5ton Electric forklift 2ton 2.5ton. Electric counterbalance trucks suit sealed floors and racking aisles.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Type | No. Item Code Unit Data Data |
| Identification | 1.02 Model CPD 20 CPD 25 |
| Dimensions | 2.01 STD Max height(with backrest) mm 4042 4042 |
| Tires | 3.01 Wheels number front/rear(X=dr ven wheels) X=2/2 X=2/2 |
| OtherDetails | 4.01 Max.traveling speed loaded/unloaded(STD) km/h 13/12 |
| Max.traveling speed loaded/unloaded | 13/12 |
| Max.traveling speed loaded/unloaded | 15/14 |
| Max.ting speed loaded/unloaded | 430/300 430/300 |
| Max.it ing speed loaded/unloaded | 430/300 430/300 |
| Max.gradient loaded | 20 20 |
| Drive motor | 11.5 11.5 |
| Lt motor | 15 15 |
| Li-ion Battery vot age/capacity | 48/400 |
Gallery
All detail images published for this model.

Electric forklift 2ton 2.5ton Electric forklift 2ton 2.5ton, part of the Electric forklift trucks line.
Battery counterbalance and multi-directional forklifts for indoor warehouses and sealed-floor duty.
Cold store and food plants
Published figures for this build: rated capacity 48/400.
Battery trucks keep noise and fumes low in covered storage areas.
The battery sits under the operator and acts as counterweight.
Electric counterbalance trucks suit sealed floors and racking aisles.
Battery trucks keep noise and fumes low in covered storage areas.
Match the tyre type to the floor surface rather than the price list. State any attachment required alongside the base model.
The specification sheet records Type: No. Item Code Unit Data Data; Specification: Manufacturer SUNRISE SUNRISE; Identification: 1.02 Model CPD 20 CPD 25; Specification: Power type Electric (AC) Electric (AC); Specification: Rated capacity Q kg 2000 2500; Specification: Load center J mm 500 500.
The specification sheet records Dimensions: 2.01 STD Max height(with backrest) mm 4042 4042; Specification: STD Max lifting height h1 mm 3000 3000; Specification: Overhead guard height h4 mm 2148 2148; Specification: Overall length(with fork) L1 mm 3310 3320; Specification: Wheelbase L2 mm 1550 1550; Specification: Front overhang L3 mm 434 434.
The specification sheet records Specification: Rear overhang L4 mm 300 310; Specification: Min.ground clearance(Frame/Mast) m1/m2 mm 115/110 115/110; Specification: Overall width W1 mm 1185 1185; Specification: Adjusting range of fork(outside) mm 250-1030 250-1030; Specification: STD Fork size(L 5*W*T) mm 1070×120×40 1070×120×40; Specification: Front wheel tread S mm 960 960.
The specification sheet records Specification: Rear wheel tread P mm 950 950; Specification: Min.turning radius R1 mm 2000 2020; Specification: Min aisle width for pallet 1000x 1200, crossways mm 3635 3655; Specification: Min aisle width for pallet 800x 1200, lengthways mm 3738 3758; Tires: 3.01 Wheels number front/rear(X=dr ven wheels) X=2/2 X=2/2; Specification: Tires type Pneumatic Pneumatic.
The specification sheet records Specification: Tires size, front 23×9-10-16PR; Specification: Tires size, rear 18×7-8-14PR; OtherDetails: 4.01 Max.traveling speed loaded/unloaded(STD) km/h 13/12; Max.traveling speed loaded/unloaded (High): 13/12; Max.traveling speed loaded/unloaded (Li-ion): 15/14; Specification: Max.lit ing speed loaded/unloaded(STD) mm/s 430/300 430/300.
The specification sheet records Max.ting speed loaded/unloaded (High): 430/300 430/300; Max.it ing speed loaded/unloaded (Li-ion): 430/300 430/300; Specification: Lowering speed loaded/unloaded mm/s Loaded≤600 /Unloaded≥300 Loaded≤600 /Unloaded≥300; Specification: Max.gradi en loaded(STD) % 15 15; Max.gradient loaded (High/Liion): 20 20; Specification: STD operating weight(wth oil&water) kg 3950 4100.
The specification sheet records Specification: Axles loading front/rear(loaded) kg 5152/798 6000/600; Specification: Axles loading front/rear(unloaded) kg 1936/2014 2000/2100; Specification: Drive motor(STD) kw 11.5; Drive motor (High/Li-ion): 11.5 11.5; Specification: Lit motor(STD) kw 15 15; Lt motor (High/Li-ion): 15 15.
The specification sheet records Specification: Controller Inomotion Inomotion; Specification: Lead-acid Battery vot age/capacity V/Ah 48/600; Li-ion Battery vot age/capacity: 48/400.
Each row in the table keeps the label and value from the source record.
An em dash marks a value the source record did not publish.
Units are copied as published; convert them only when comparing models.
Those missing values can be requested directly through the enquiry form.
Configuration follows the load, working height and site layout.
Measure the pallet footprint before the chassis is shortlisted.
The listed figures follow the record; options are confirmed on the quotation.
Match the power arrangement to the shifts and the working environment.
Check the machine weight against floor loading where the site is raised.
List the models that clear each constraint before asking for a quote.
Compare capacity first, then the lift height the job actually needs.
On the Electric forklift 2ton 2.5ton, list the attachments required, such as clamps, sideshift or rotator.
Keep the charging or refuelling position clear of the main traffic aisle.
On the Electric forklift 2ton 2.5ton, measure the pallet footprint and the heaviest single load before comparing models.
State the shifts per day so the power arrangement can be sized properly.
On the Electric forklift 2ton 2.5ton, check the lowest door, beam height and aisle the truck has to pass through.
On the Electric forklift 2ton 2.5ton, unusual noise or movement is reported before further use.
Battery or fuel levels are checked at the start of each shift.
On the Electric forklift 2ton 2.5ton, the operator checks load stability before each lift or move.
Loads are kept low while travelling between stations.
On the Electric forklift 2ton 2.5ton, attachments such as clamps or rotators are matched to the load shape.
This machine usually works alongside pallet trucks and stacking equipment.
On the Electric forklift 2ton 2.5ton, storage cages and racking organise the loads it moves between stations.
The layout drawing shows where each machine sits in the operation.
On the Electric forklift 2ton 2.5ton, the signed datasheet issued with the quotation is the binding version.
Capacity above the rated lift height follows the mast curve.
On the Electric forklift 2ton 2.5ton, dimensions are checked against the source record before quoting.
The specification sheet is the binding reference for listed values.
On the Electric forklift 2ton 2.5ton, the operation and parts material travel with the machine.
Documents issued for an order are listed in the quotation.
On the Electric forklift 2ton 2.5ton, mixed equipment can be listed on one enquiry.
Wear parts are supplied after delivery against the parts manual.
The operation material covers controls, checks and routine service points.
Ask for the specific certificate required for your target country.
The parts manual lists the wear items and their reference views.
Questions
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.