Electric forklift FB45 FB50 FB60 Electric forklift FB45 FB50 FB60. Indoor shifts without exhaust are the main reason buyers choose electric.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| 1 Model | FB45; FB50; FB60 |
| 2 Power Type | FB45: Electric; FB50: Electric; FB60 |
| 3 Rated Capacity | FB45: 4500; FB50: 5000; FB60: 6000 |
| 4 Load Centre | FB45: 500; FB50: 500; FB60: 500 |
| 5 Lift Height | FB45: 3000; FB50: 3000; FB60: 3000 |
| 6 Fork Size L×W×T | FB45: 1070x150x50; FB50: 1070x150x50; FB60: 1070x150x50 |
| 7 Mast Tilt Angle F/R | FB45: 6°/9°; FB50: 6°/9°; FB60: 6°/9° |
| 8 Front Overhang (Wheel center to fork face) | FB45: 555; FB50: 555; FB60: 555 |
| 9 Tread F/R | FB45: 1280/1190; FB50: 1280/1190; FB60: 1280/1190 |
| 10 Ground Clearance (Bottom of mast) | FB45: 160; FB50: 160; FB60: 160 |
| 11 Fork Spread Min./Max. | FB45: 300/1380; FB50: 300/1380; FB60: 300/1380 |
| 12 Length to face of fork (Without fork) | FB45: 3030; FB50: 3030; FB60: 3030 |
| 13 Overall Width | FB45: 1600; FB50: 1600; FB60: 1600 |
| 14 Mast Lowered Height | FB45: 2330; FB50: 2330; FB60: 2330 |
| 15 Mast Extended Height (With backrest) | FB45: 4255; FB50: 4255; FB60: 4255 |
| 16 Overhead Guard Height | FB45: 2255; FB50: 2255; FB60: 2255 |
| 17 Turning Radius (outside) | FB45: 2755; FB50: 2755; FB60: 2755 |
| 18 Min. inseating aisle | FB45: 2955; FB50: 2955; FB60: 2955 |
| 19 Speed Travel (Empty load) | FB45: 14; FB50: 14; FB60: 14 |
| 20 Lifting (Full load) | FB45: 250; FB50: 220; FB60: 220 |
| 21 Max. Gradeability | FB45: 15; FB50: 15; FB60: 15 |
| 22 Tire Front | FB45: 2.8x12.5-15-24 PR; FB50: 2.8x12.5-15-24 PR; FB60: 2.8x12.5-15-24 |
| 23 Tire Rear | FB45: 7.00-12-14 PR; FB50: 7.00-12-14 PR; FB60: 7.00-12-14 |
| 24 Wheelbase | FB45: 2000; FB50: 2000; FB60: 2000 |
| 25 Service weight | FB45: 7500; FB50: 7800; FB60: 8200 |
| 26 Drive Motor | FB45: 9.1x2; FB50: 9.1x2; FB60: 9.1x2 |
| 27 Lift Motor | FB45: 25.4; FB50: 25.4; FB60: 25.4 |
| 28 Battery Voltage/Capacity | FB45: 80/600; FB50: 80/700; FB60: 80/800 |
| 29 Controller Manufacturer | FB45: CURTIS; FB50: CURTIS; FB60 |
| 30 Controller Type | FB45: AC; FB50: AC; FB60 |
| 31 Operating Pressure for Attachment | FB45: 17.5; FB50: 17.5; FB60: 17.5 |
Gallery
All detail images published for this model.











Electric forklift FB45 FB50 FB60 Electric forklift FB45 FB50 FB60, part of the Electric forklift trucks line.
Battery counterbalance and multi-directional forklifts for indoor warehouses and sealed-floor duty.
Indoor order picking
Published figures for this build: rated capacity FB45: 4500; FB50: 5000; FB60: 6000, lift height FB45: 3000; FB50: 3000; FB60: 3000, overall width FB45: 1600; FB50: 1600; FB60: 1600, turning radius FB45: 2755; FB50: 2755; FB60: 2755.
Electric counterbalance trucks suit sealed floors and racking aisles.
Battery trucks keep noise and fumes low in covered storage areas.
The compact chassis fits narrow indoor aisles and dock approaches.
Electric counterbalance trucks suit sealed floors and racking aisles.
Match the tyre type to the floor surface rather than the price list. Check closed mast or chassis height against the lowest door on the route.
The specification sheet records Specification is not published in the source record; Model: FB45; FB50; FB60; Power Type: FB45: Electric; FB50: Electric; FB60; Specification is not published in the source record; Rated Capacity (kg): FB45: 4500; FB50: 5000; FB60: 6000; Load Centre (mm): FB45: 500; FB50: 500; FB60: 500.
The specification sheet records Lift Height (mm): FB45: 3000; FB50: 3000; FB60: 3000; Fork Size L×W×T (mm): FB45: 1070x150x50; FB50: 1070x150x50; FB60: 1070x150x50; Mast Tilt Angle F/R (Deg): FB45: 6°/9°; FB50: 6°/9°; FB60: 6°/9°; Front Overhang (Wheel center to fork face) (mm): FB45: 555; FB50: 555; FB60: 555; Tread F/R (mm): FB45: 1280/1190; FB50: 1280/1190; FB60: 1280/1190; Ground Clearance (Bottom of mast) (mm): FB45: 160; FB50: 160; FB60: 160.
The specification sheet records Fork Spread Min./Max. (mm): FB45: 300/1380; FB50: 300/1380; FB60: 300/1380; Length to face of fork (Without fork) (mm): FB45: 3030; FB50: 3030; FB60: 3030; Overall Width (mm): FB45: 1600; FB50: 1600; FB60: 1600; Mast Lowered Height (mm): FB45: 2330; FB50: 2330; FB60: 2330; Mast Extended Height (With backrest) (mm): FB45: 4255; FB50: 4255; FB60: 4255; Overhead Guard Height (mm): FB45: 2255; FB50: 2255; FB60: 2255.
The specification sheet records Turning Radius (outside) (mm): FB45: 2755; FB50: 2755; FB60: 2755; Min. inseating aisle (mm): FB45: 2955; FB50: 2955; FB60: 2955; Specification is not published in the source record; Speed Travel (Empty load) (km/h): FB45: 14; FB50: 14; FB60: 14; Lifting (Full load) (mm/s): FB45: 250; FB50: 220; FB60: 220; Max. Gradeability (%): FB45: 15; FB50: 15; FB60: 15.
The specification sheet records Specification is not published in the source record; Tire Front: FB45: 2.8x12.5-15-24 PR; FB50: 2.8x12.5-15-24 PR; FB60: 2.8x12.5-15-24; Tire Rear: FB45: 7.00-12-14 PR; FB50: 7.00-12-14 PR; FB60: 7.00-12-14; Wheelbase (mm): FB45: 2000; FB50: 2000; FB60: 2000; Service weight (kg): FB45: 7500; FB50: 7800; FB60: 8200; Specification is not published in the source record.
The specification sheet records Drive Motor (kw): FB45: 9.1x2; FB50: 9.1x2; FB60: 9.1x2; Lift Motor (kw): FB45: 25.4; FB50: 25.4; FB60: 25.4; Battery Voltage/Capacity (V/Ah): FB45: 80/600; FB50: 80/700; FB60: 80/800; Controller Manufacturer: FB45: CURTIS; FB50: CURTIS; FB60; Controller Type: FB45: AC; FB50: AC; FB60; Operating Pressure for Attachment (Mpa): FB45: 17.5; FB50: 17.5; FB60: 17.5.
Those missing values can be requested directly through the enquiry form.
Each row in the table keeps the label and value from the source record.
Units are copied as published; convert them only when comparing models.
An em dash marks a value the source record did not publish.
Configuration follows the load, working height and site layout.
Send pallet size, door height and aisle width with the enquiry.
Door and beam heights decide which mast will clear the route.
List the models that clear each constraint before asking for a quote.
Compare the lowered height against the lowest door on the route.
Note any attachment that changes the load centre or the overall width.
Match the power arrangement to the shifts and the working environment.
On the Electric forklift FB45 FB50 FB60, list the attachments required, such as clamps, sideshift or rotator.
Check the lowest door, beam height and aisle the truck has to pass through.
On the Electric forklift FB45 FB50 FB60, send photographs of the racking and the existing working area when possible.
Keep the charging or refuelling position clear of the main traffic aisle.
On the Electric forklift FB45 FB50 FB60, note any slope, threshold or step along the working route.
On the Electric forklift FB45 FB50 FB60, routine checks cover tyres, brakes, controls and visible leaks.
The operator follows the rated capacity marked on the chassis.
On the Electric forklift FB45 FB50 FB60, the operator checks load stability before each lift or move.
Unusual noise or movement is reported before further use.
On the Electric forklift FB45 FB50 FB60, the receiving side pairs it with a dock ramp or platform where needed.
The layout drawing shows where each machine sits in the operation.
On the Electric forklift FB45 FB50 FB60, spare parts for wear items follow the parts manual after delivery.
Related models in the same group are listed on the family page.
On the Electric forklift FB45 FB50 FB60, the signed datasheet issued with the quotation is the binding version.
Site conditions such as gradient, dust and moisture belong in the enquiry.
On the Electric forklift FB45 FB50 FB60, tyre choice should match the floor rather than the price list.
The specification sheet is the binding reference for listed values.
On the Electric forklift FB45 FB50 FB60, the operation and parts material travel with the machine.
Packing follows sea-freight practice for the chosen chassis.
On the Electric forklift FB45 FB50 FB60, wear parts are supplied after delivery against the parts manual.
Quote the serial number and component name when ordering spares.
The operation material covers controls, checks and routine service points.
The serial number identifies the build when parts are ordered later.
The parts manual lists the wear items and their reference views.
Questions
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.
The minimum order quantity is one set, and mixed models can be combined in one container.
Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.
Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.