TF10A 15A 20A Electric reach stacker, rated capacity 270 ah. Stackers work in narrow aisles where a counterbalance truck will not turn.

Specification
Values are copied from the source record in their original order and units.
| Parameter | Value |
|---|---|
| Model | TF10A TF15A TF20A |
| Performance | Maximum load capacity kg 1000 1500 2000 |
| with load center at | Q mm 500 500 500 |
| Maximum lifting height | H3 mm 1600 1600 1600 |
| Reach length | E mm 510 510 600 |
| Tiltiing angle | deg ° 3/5 3/5 3/5 |
| Travel speed | 5.3 5.3 5.3 |
| Travel speed | 5.3 5.3 5.3 |
| Lifting speed | mm/s 120 120 120 |
| Lifting speed | mm/s 92 92 92 |
| Lowered speed | mm/s 173 173 173 |
| Lowered speed | mm/s 530 530 530 |
| Ascend slope ability | 8 8 8 |
| Ascend slope ability | 5 5 5 |
| Weight | 2050 2080 2140 |
| Dimensions | Overall length of frame(mast no reach) L mm 1780 1780 1880 |
| Overall length | L1 mm 2282 2282 2332 |
| Overall length | L2 mm 2860 2860 2980 |
| Overall width of frame | B mm 1034 1034 1034 |
| Overhead guard height | 2185 2185 2185 |
| Mast lowered height | H1 mm 2200 2200 2200 |
| Max height | H2 mm 2638 2638 2638 |
| Wheelbase | Y mm 1450 1450 1550 |
| Fork length | 1070 1070 1070 |
| Fork width | 100 100 120 |
| Fork lowered height | S mm 35 35 40 |
| Fork spread width | 210-716 210-716 250-716 |
| Min frounf height | 55 55 55 |
| Turning radius | Wa mm 1815 1815 1906 |
| Minimum aisle for right-angle stacking | Asts mm 2814 2814 2914 |
| Tire | Front wheel mm 210*75 210*75 210*75 |
| Drive wheel | 230*75 230*75 230*75 |
| Caster wheel | 130*55 130*55 130*55 |
| Wheel material | polyurethane |
| Electrical components | Drive motor type AC series motor |
| Rated output | 1.5 1.5 1.5 |
| Hoist motor type | DC series motor |
| Rated output | 3 3 3 |
| battery | Voltage V 24 24 24 |
| Capacity | 270 |
| Weight | 248 |
Gallery
All detail images published for this model.


TF10A 15A 20A Electric reach stacker, part of the Reach stackers line.
Reach stackers and straddle trucks that store loads deep in narrow-aisle racking.
Walk-behind pallet lifting
Published figures for this build: rated capacity 270 ah, overall width B mm 1034 1034 1034, turning radius Wa mm 1815 1815 1906.
The walk-behind model leaves the operator free to guide each load.
Walk-behind and stand-on stackers put loads straight onto racking.
Stackers keep the pallet close to the legs while lifting at height.
The walk-behind model leaves the operator free to guide each load.
Match the tyre type to the floor surface rather than the price list. Check closed mast or chassis height against the lowest door on the route.
The specification sheet records Model: TF10A TF15A TF20A; Performance: Maximum load capacity kg 1000 1500 2000; with load center at: Q mm 500 500 500; Maximum lifting height: H3 mm 1600 1600 1600; Reach length: E mm 510 510 600; Tiltiing angle (up/down): deg ° 3/5 3/5 3/5.
The specification sheet records Travel speed (without load): 5.3 5.3 5.3; Travel speed (with load): 5.3 5.3 5.3; Lifting speed (without load): mm/s 120 120 120; Lifting speed (with load): mm/s 92 92 92; Lowered speed (without load): mm/s 173 173 173; Lowered speed (with load): mm/s 530 530 530.
The specification sheet records Ascend slope ability (without load): 8 8 8; Ascend slope ability (with load): 5 5 5; Weight (without battery): 2050 2080 2140; Dimensions: Overall length of frame(mast no reach) L mm 1780 1780 1880; Overall length (mast no reach): L1 mm 2282 2282 2332; Overall length (mast reach): L2 mm 2860 2860 2980.
The specification sheet records Overall width of frame: B mm 1034 1034 1034; Overhead guard height (mm): 2185 2185 2185; Mast lowered height: H1 mm 2200 2200 2200; Max height (mast lifted with backrest): H2 mm 2638 2638 2638; Wheelbase: Y mm 1450 1450 1550; Fork length (mm): 1070 1070 1070.
The specification sheet records Fork width (mm): 100 100 120; Fork lowered height: S mm 35 35 40; Fork spread width (mm): 210-716 210-716 250-716; Min frounf height (mm): 55 55 55; Turning radius: Wa mm 1815 1815 1906; Minimum aisle for right-angle stacking (1200x1200): Asts mm 2814 2814 2914.
The specification sheet records Tire: Front wheel mm 210*75 210*75 210*75; Drive wheel (mm): 230*75 230*75 230*75; Caster wheel (mm): 130*55 130*55 130*55; Wheel material: polyurethane; Electrical components: Drive motor type AC series motor; Rated output (kw): 1.5 1.5 1.5.
The specification sheet records Hoist motor type: DC series motor; Rated output (kw): 3 3 3; battery: Voltage V 24 24 24; Capacity (ah): 270; Weight (kg): 248.
Options and attachments are listed separately from the base chassis.
Those missing values can be requested directly through the enquiry form.
Rated figures apply at the standard load centre unless a row says otherwise.
Units are copied as published; convert them only when comparing models.
For an electric chassis, the main choices are battery capacity, mast type and attachment.
Measure the pallet footprint before the chassis is shortlisted.
The enquiry should list any attachment the job requires.
Compare the lowered height against the lowest door on the route.
Review the tyre type against the surface the machine will run on.
Compare capacity first, then the lift height the job actually needs.
List the models that clear each constraint before asking for a quote.
On the TF10A 15A 20A, keep the charging or refuelling position clear of the main traffic aisle.
Check headroom under beams, pipes and door frames along the route.
On the TF10A 15A 20A, mark the stations where loads are picked up and dropped off each shift.
List the attachments required, such as clamps, sideshift or rotator.
On the TF10A 15A 20A, measure the pallet footprint and the heaviest single load before comparing models.
On the TF10A 15A 20A, battery or fuel levels are checked at the start of each shift.
Attachments are secured before the machine leaves the station.
On the TF10A 15A 20A, the operator follows the rated capacity marked on the chassis.
The working area is kept clear of loose packaging and obstacles.
On the TF10A 15A 20A, related models in the same group are listed on the family page.
The layout drawing shows where each machine sits in the operation.
On the TF10A 15A 20A, storage cages and racking organise the loads it moves between stations.
Spare parts for wear items follow the parts manual after delivery.
On the TF10A 15A 20A, the signed datasheet issued with the quotation is the binding version.
Dimensions are checked against the source record before quoting.
On the TF10A 15A 20A, capacity above the rated lift height follows the mast curve.
Attachments are quoted separately once the base chassis is fixed.
On the TF10A 15A 20A, the enquiry should include the quantity and destination port.
Quotations follow the model, listed specification and destination port.
On the TF10A 15A 20A, loading is recorded before the container is sealed.
Wear parts are supplied after delivery against the parts manual.
The serial number identifies the build when parts are ordered later.
Ask for the specific certificate required for your target country.
The parts manual lists the wear items and their reference views.
Questions
The listed rated capacity is 270 ah at the standard load centre. Above the rated lift height capacity derates along the mast curve.
The specification lists Voltage. Battery choice depends on shifts per day and spare battery needs.
The listed tyre type is Front. Solid tyres suit sealed concrete; pneumatic tyres suit rough outdoor ground.
The specification lists a load centre of Q. Loads carried farther forward reduce rated capacity.
Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.
The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.
The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.
Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.
Related
Same-family comparison using the published source figures; open a model page for the full specification.
Explore
Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.