Guangzhou, China ISO 9001 · ISO 14001 · ISO 18001 CE / GS tested by TÜV Rheinland
Sales desk Guangzhou · +86 198 6588 7686
All equipment families257 modelsBuying guides13ForkliftDiesel forklift trucks9Electric forklift trucks11LPG and gas forklift trucks7StackerReach stackers10Stackers and order pickers33Pallet truckPallet trucks25Lift table and drum handlingDrum handlers11Lift tables20Vacuum lifterVacuum lifters19Aerial work platformAerial work platforms14Electric tractorElectric tow tractors9ConveyorConveyors9Loading rampDock ramps7Storage systemStorage systems28Other handling equipmentSpecial-purpose handling equipment45 Videos Buying guides Search models Certificates Buyer FAQ About us Contact us Request a quote

Electric platform truck — stacker

Electric platform truck Electric platform truck. The walk-behind model leaves the operator free to guide each load.

Electric platform truck stacker — product photo 1 of 4

Ordering facts for the Electric platform truck

Confirmed terms
Minimum order
1 set — mixed models can be combined in one container.
Lead time
Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days.
Payment
T/T 30% deposit, 70% balance against copy of the bill of lading.
Loading ports
Guangzhou, Shenzhen or Nansha.
Certification
CE on the product range; the factory holds ISO 9001, ISO 14001 and ISO 18001.
Warranty
12 months from delivery.
Price
Prices are not published on this site — every offer is quoted line by line against the load, lift height, floor condition and destination port.

Specification

Electric platform truck specification

Values are copied from the source record in their original order and units.

Electric platform truck specification table
ParameterValue
ModelRTP800S; RTP800B
CapacityRTP800S: 800; RTP800B: 800
Driving motorRTP800S: 800; RTP800B: 800
Overall lengthRTP800S: 1500; RTP800B: 2000
Overall widthRTP800S: 800; RTP800B: 1000
Overall heightRTP800S: 1100; RTP800B: 1100
BatteryRTP800S: 48/20; RTP800B: 48/20
Wheel sizeRTP800S: 350; RTP800B: 350
Wheel baseRTP800S: 1300; RTP800B: 1300
Max speedRTP800S: 25; RTP800B: 25
WeightRTP800S: 112; RTP800B: 130
Request price Datasheet (print / save as PDF) Ask about voltage

Gallery

Product photographs

All detail images published for this model.

What this model is built to do

Electric platform truck Electric platform truck, part of the Stackers and order pickers line.

Walk-behind, ride-on and semi-electric stackers plus order picking platform trucks.

Walk-behind pallet lifting

Published figures for this build: rated capacity RTP800S: 800; RTP800B: 800, overall width RTP800S: 800; RTP800B: 1000.

Straddle legs carry the mast forward for a much narrower aisle.

Stackers keep the pallet close to the legs while lifting at height.

Walk-behind and stand-on stackers put loads straight onto racking.

Stackers keep the pallet close to the legs while lifting at height.

Compare rated capacity against the heaviest single load you move. Check closed mast or chassis height against the lowest door on the route.

Specification walk-through

The specification sheet records Model: RTP800S; RTP800B; Capacity (kg): RTP800S: 800; RTP800B: 800; Driving motor (w): RTP800S: 800; RTP800B: 800; Overall length (mm): RTP800S: 1500; RTP800B: 2000; Overall width (mm): RTP800S: 800; RTP800B: 1000; Overall height (mm): RTP800S: 1100; RTP800B: 1100.

The specification sheet records Battery (v/ah): RTP800S: 48/20; RTP800B: 48/20; Wheel size (mm): RTP800S: 350; RTP800B: 350; Wheel base (mm): RTP800S: 1300; RTP800B: 1300; Max speed (km/h): RTP800S: 25; RTP800B: 25; Weight (kgs): RTP800S: 112; RTP800B: 130.

Units are copied as published; convert them only when comparing models.

Rated figures apply at the standard load centre unless a row says otherwise.

An em dash marks a value the source record did not publish.

Each row in the table keeps the label and value from the source record.

How to specify the right build

Configuration follows the load, working height and site layout.

Send pallet size, door height and aisle width with the enquiry.

The listed figures follow the record; options are confirmed on the quotation.

Check the chassis width against the aisle and the container door.

Note any attachment that changes the load centre or the overall width.

Compare capacity first, then the lift height the job actually needs.

Review the tyre type against the surface the machine will run on.

  • Mark the stations where loads are picked up and dropped off each shift.
  • List the load per move, lift height and floor surface before comparing models.
  • List attachments such as clamps, sideshift or rotator separately.

Site preparation and operating notes

On the Electric platform truck, send photographs of the racking and the existing working area when possible.

State the shifts per day so the power arrangement can be sized properly.

On the Electric platform truck, check the lowest door, beam height and aisle the truck has to pass through.

List the attachments required, such as clamps, sideshift or rotator.

On the Electric platform truck, mark the stations where loads are picked up and dropped off each shift.

Operation and routine checks

On the Electric platform truck, battery or fuel levels are checked at the start of each shift.

The working area is kept clear of loose packaging and obstacles.

On the Electric platform truck, the operator follows the rated capacity marked on the chassis.

Loads are kept low while travelling between stations.

How this model fits the operation

On the Electric platform truck, the receiving side pairs it with a dock ramp or platform where needed.

Attachments such as clamps or rotators are matched to the load shape.

On the Electric platform truck, related models in the same group are listed on the family page.

Storage cages and racking organise the loads it moves between stations.

Working conditions and honest limits

On the Electric platform truck, the signed datasheet issued with the quotation is the binding version.

Attachments are quoted separately once the base chassis is fixed.

On the Electric platform truck, tyre choice should match the floor rather than the price list.

Dimensions are checked against the source record before quoting.

Delivery, documents and support

On the Electric platform truck, the operation and parts material travel with the machine.

Quotations follow the model, listed specification and destination port.

On the Electric platform truck, packing follows sea-freight practice for the chosen chassis.

Quote the serial number and component name when ordering spares.

Ask for the specific certificate required for your target country.

The parts manual lists the wear items and their reference views.

Test and conformity documents follow the model and destination market.

Before you order

  • The rated load applies at the standard load centre; carrying the load farther forward reduces the figure marked on the chassis plate.
  • Measure the lowered chassis and mast height against the lowest door and the container door on the planned route.
  • Attachments are quoted separately once the base chassis is fixed, so the attachment weight can be counted against the residual capacity.
  • CE or GS documentation where applicable is listed in the quotation together with the factory quality certificates.
  • Spare parts follow the parts manual supplied with the machine; quote the serial number and component name when ordering wear parts.

Questions

Questions buyers ask before ordering

Can it enter a container or trailer?+

Container entry depends on lowered width, mast height and guard clearance. Compare these with the container door.

Which certifications accompany the machine?+

The product range is CE marked and the factory holds ISO 9001, ISO 14001 and ISO 18001. The documents issued for a specific order are listed in the quotation.

What is the lead time?+

Many forklift, pallet truck, stacker and reach truck models are held in ready stock; customised units are built in about 25 days. The confirmed date for your order is stated on the proforma invoice.

How are spare parts handled after delivery?+

The machine ships with a parts manual. Wear parts can be ordered after delivery against serial number and part name.

What information do you need for a quotation?+

Send load per move, lift height, floor surface, quantity and destination port. The reply lists the matching specification.

What does the price depend on?+

Prices are not published. Price follows chassis, mast or lift option, power arrangement, tyres and destination port; send the specification and you receive a line-by-line offer.

What is the minimum order quantity?+

The minimum order quantity is one set, and mixed models can be combined in one container.

How is payment arranged?+

Standard terms are T/T 30% deposit with 70% balance against copy of the bill of lading.

Which ports can the machine ship from?+

Shipment can be arranged from Guangzhou, Shenzhen or Nansha, whichever suits the sailing and the inland routing.

Related

Other models in this family

Same-family comparison using the published source figures; open a model page for the full specification.

Stackers and order pickers related models

ModelCapacityLiftPowerTypical use
PWSR500 kg——Narrow-aisle put-away
WSR1000 kg——Walk-behind pallet lifting
CTY-A—1600—Low-level pallet stacking
CTY-D—1600—Narrow-aisle put-away
CTY-E—1600—Walk-behind pallet lifting

Explore

Related equipment and buying guides

Send the load and the working conditions

Send the load per move, the lift height and the floor surface. The sales desk matches the chassis to those figures and replies with a line-by-line offer.

Tel0086-20-23357922
WhatsApp / WeChat0086-19865887686
OfficeRoom 2102, No.348 Tancun Road, Tianhe District, Guangzhou, China
We reply within 12 working hours.